467 tulosta haulle: "PHYWE"

Supplier: PHYWE

Precision Dynamometers with fine tuning for both tensile and compressive forces.

Supplier: PHYWE

Practical device for demonstration and determination of the force that keeps a body in balance on an inclined plane.

Supplier: PHYWE

Phywe's transparent Stirling engine clearly shows the engine's components and operation. For the demonstration of the function of.

Supplier: PHYWE

With a special addition, the analogue instrument can be turned into a digital instrument with simultaneous analogue display. In order to extend the measurement possibilities, there are also measurements for power and voltage amplification. The replaceable measuring areas are slid into a slot on the top of the instrument ('toaster principle').

Supplier: PHYWE

Educational Materials, Electricity/Magnetism, Application: Physics, Measurement insert for pressure For measurement and demonstration of pressure. Scale graded in bar. Comes with measuring probe and cable

Supplier: PHYWE

Same as 765-1149 but without painting. 50 components incl. Manual.

Supplier: PHYWE

Precision capacitor for electrostatic tests e.g. examination of the relationship between charge, voltage and capacitance. Measurement of the dielectric constant and the electrostatic induction constant. The permanently mounted plate is well insulated while the movable plate is mounted directly in the stand. The distance between the capacitor plates can be adjusted with an accuracy of 0.1 mm. Distance between plates 0 to 70 mm.

Supplier: PHYWE

For demonstration of electric fields between electrodes of different shapes. The electrodes have been applied in thin conductive layers on plexiglass plates and the field line images appear in groats placed in a cuvette with 1 to 2 mm castor oil (the cuvette is placed on the plexiglass plate). The cuvette has an annular electrode in the outer jacket and a 4 mm connection sleeve. The cleaning is easy when electrodes resp. plexiglass plate never comes into contact with the oil. Suitable voltage source: High voltage generator 0 to 25 kV or Van de Graff generator.

Supplier: PHYWE

Used to detect thermal radiation, visible light and ultraviolet light. The sensitivity is wavelength dependent in the range 150 nm-15 µm. The output voltage is closely proportional to the incident radiant energy. Suitable for measuring small temperature differences. Quick stabilization, 2-3 p. Consists of 16 series-connected thermocouples placed in a conical reflector. The elements are protected by a high-gloss metal cylinder, which is fitted with a removable protective glass at the front. Suitable for use with, for example, microvolt amplifiers 765-1293 in conjunction with demonstration instruments 765-1247 or for connection to Phywe's large analog or digital demonstration multimeters. Comes with protective tube and gap.

Supplier: PHYWE

TESS OE3 contains 19 components. With TESS OE3 as a complement to TESS OE1 and OE2, another 30 experiments can be performed in the field of wave optics. Delivered in a plywood box.

Supplier: PHYWE

PHYWES well-known demonstration multimeter ADM 2 has now been supplemented with the new, slightly smaller but still powerful ADM 1. ADM 1 is a passive, user-friendly instrument for measuring current and voltage (AC/DC).

Supplier: PHYWE

Two identical coils with a diameter of 400 mm (2R), 154 turns of winding each and mounted on separate sockets with connection contacts. Distance between coils 200 mm (R). The coils are held together by three detachable rails. Two of these have brackets for wire beam tubes 765-1206. The coils are used, for example, to provide a homogeneous magnetic field in the wire beam tube. Suitable voltage: 7 V DC (well smoothed) if the coils are connected in parallel and 14 V DC for series connection.

Supplier: PHYWE

Ice cream sphere filled with noble gas of low pressure. The tube's two cylindrical necks are protected by plastic sleeves and are designed to fit in Helmholtz coils 765-1207. The tube is used to show how an electron beam is deflected in a magnetic field. If the tube is in a homogeneous magnetic field with sufficient strength, the electron beam becomes circular. The tube is equipped with an internal measuring scale with fluorescent markings at distances of 4, 6, 8 and 10 cm (2r) from the cathode. The tube is well suited for determining the charge-mass ratio of the electron with great accuracy.

Supplier: PHYWE

Equipment for demonstrating photoelectric power and determining Planck's constant. A photocell is equipped with filters that only transmit light of a certain wavelength. The photocell is illuminated with light from a Hg lamp. The potassium cathode then emits electrons that pass over to the unlit anode. Over time, a voltage arises that prevents new electrons from reaching the anode. The resulting voltage is measured with a measuring amplifier and a voltmeter. The measurement is repeated with filters for different wavelengths. Photocell and Hg lamp are equipped with magnets at the bottom for stable installation on the mounting plate. List of equipment.

Supplier: PHYWE

Detailed description of 31 trials.

Supplier: PHYWE

For demonstration of the function of an electric compression heat pump.

Supplier: PHYWE

PHYWE table optics for laboratory work with mirrors, light refraction, lenses, eye function and light refraction. Content:

Supplier: PHYWE

Equipment for quantitative demonstration of the electron's wave nature and particle properties. At high electron energy, interference can be observed and evaluated in the form of Debye-Scherrer rings. The Broglie equation and Bragg's conditions can be proved. At low electron energies, the paticle properties of the electron can be demonstrated in a manner similar to geometric optics.

Supplier: PHYWE

Supplementary kit for table optics 765-1317. Content:

Supplier: PHYWE

For measuring low currents AC/DC and DC voltages AC/DC eg Hall voltages and thermal voltages. High sensitivity and very good electrical stability. Well shielded from disturbing voltages. Overload protected up to 220 V AC/DC. The front is equipped with two scales 0 to 3 and 0 to 10 both with fine division, measuring area window and automatic function indication. The back is equipped with a function switch, measuring range switch, pushbutton for zero setting and steering wheel for electrical zero adjustment. There is also a printer connection.

Supplier: PHYWE

Tripod rods with square cross section 12×12 mm. Made of galvanized galvanized steel pipe. One end of the rod is provided with a cylindrical rod (50×10 mm). The other end closed. Square rods provide unmatched torsional rigidity compared to cylindrical frame rods.

Supplier: PHYWE

Only 50 components.

Supplier: PHYWE

Contains 50 different components including detailed instructions. Delivered in a plywood box, 31 different attempts are described in the manual, e.g. Examples of experiments:

Supplier: PHYWE

With a few simple steps, the ballistic pendulum is quickly rebuilt into a throwing device with a variable/variable firing angle. The ballistic pendulum, a common method for determining the speed of a pistol bullet, is to push them into a sandbag. With the ballistic pendulum, a harmless variant of this experiment can be performed in the classroom.

Supplier: PHYWE

With the equipment, centrifugal forces that arise during a body's rotation around a specific axis can be measured and examined. The device consists of a plane with a path for a cart. On the underside there is a vertical shaft that is mounted in a bearing. The plane is made to rotate with a laboratory motor connected with a drive belt to the bearing. The experimental trolley is placed on the track and prevented from leaving the track by two bent steel wires. A wire is connected to the trolley that runs over a pulley and on to a dynamometer.

Supplier: PHYWE

The profile of the runway has been designed so that the experiments can be performed easily, quickly and safely. The length of the track (1,5 m) is more than sufficient for all conceivable physical experiments to be performed. The trolleys are equipped with overload protection in the form of a recessed, resilient wheel suspension. Characteristics.

Supplier: PHYWE

Divers of glass, placed in a bottle filled with water. If the liquid pressure increases, water flows into the diver, whose average density increases. This results in the diver sinking to rise again towards the surface when the pressure is reduced.

Supplier: PHYWE

Tubular glow lamp of glass. With conical contact hats at the ends. Used, inter alia, to determine the polarity of charge, because light only occurs around the negative electrode. Ignition voltage approximately 80 V, switching voltage approximately 65 V. For example, connects with crocodile clips.

Supplier: PHYWE

Equipment for demonstration of the quantum properties of the electric charge, as well as to determine the elementary charge. The experiment is easy to perform and suitable for both laboratory and demonstration using the Videoflex camera (765-1000). With the equipment, the elemental charge can be determined in 3 ways: change of charge by means of an alpha radiator, falling and rising speed with constant capacitor voltage and free voltage and falling speed without electric field.

Supplier: PHYWE

For demonstration of the rocket principle. The model is half filled with water and placed on a launch pad. An internal overpressure is inflated with an air pump. The rocket is released manually and then flies freely longer than 40 m. Can also be propelled with a carbon dioxide cartridge along a tensioned line. The rocket's traction force, with carbon dioxide cartridge as the driving source, can be measured with a dynamometer and amounts to about 0.3 N.