467 Results for: "PHYWE"

Supplier: PHYWE

Used in studies of the power action of a current-carrying conductor in a magnetic field. The field can e.g. obtained from U-magnet 765-0444. With two bands, the force action between these at different current directions can be investigated. Each band is provided at both ends with a 4 mm banana plug.

Supplier: PHYWE

For electrostatic experiments, for example, determination of the charge of a sphere and induction experiments. Hollow surface-treated brass sphere equipped with 4 mm holes for connecting banana connectors.

Supplier: PHYWE

Made of cast, lacquered zinc alloy. Equipped with rubber feet with level control on all three legs. Fits tripod rods with a diameter of 6 to 14 mm.

Supplier: PHYWE

Suitable for use as pendulum bobs for frequency experiments. Hardened and polished ball bearings with eyelet.

Supplier: PHYWE

With equipment, demonstration and accurate calculations can be performed of how the atom's spectral lines are divided by the influence of a magnetic field (the Zeeman effect).

Supplier: PHYWE

The following experiments can be performed.

Supplier: PHYWE

Apparatus for demonstrating the independence of the components of a composite motion. A force is exerted against an arrow, in the direction of a vertically set target, by means of a wire connected to an elastic band. When the arrow is released, the target is released at the same time. The arrow always hits the free-falling target, regardless of the position from which the arrow is released. Supplied with wooden plate with mounted strap, spring lock for attaching the target, arrow with string (approx. 275 cm) and target.

Supplier: PHYWE

Power source for all electrostatic experiments and for operating spectral and gas discharge tubes. The unit provides three continuously variable DC voltages isolated from ground. Two of the voltages are connected in series of 0 – 5 kV, giving a total voltage of 0 – 10 kV. Voltage polarity can be positive or negative. Digital 3-digit display and switchable to the desired socket with switching dials with LED marks the selected outlets.

Supplier: PHYWE

Glass tube used to demonstrate standing waves and acoustical forces. When used in conjunction with a sound source (single frequency), plunger to alter the effective length of the tube and cork dust or talcum powder, the tube can be made to resonate and the powder will aggregate at nodes in the tube. Calculation of the wavelength and speed of sound can be calculated from the measurement of these nodes.

Supplier: PHYWE

Very stable and versatile A-foot with 6 mounting holes for various accessories. 2 of the 3 rubber feet have individual level adjustment. Made of cast, lacquered zinc alloy. Intended for cylindrical stand rods 6 to 14 mm and/or square stand rods with a cross section of 6×6 to 12×12 mm.

Supplier: PHYWE

Detailed description of 18 trials.

Supplier: PHYWE

Demonstration instrument for lossless measurement of DC and AC voltages. Due to the high insulation resistance (approx. 1014 ©), the instrument loads the voltage source insignificantly. At the same time, the voltage drop becomes negligible. The measuring systems are protected against disturbing fields and placed in plastic apparatus housings. The measurement can be studied from the back through a window. The large and clear scale and the design of the pointer make the instrument very easy to read even at longer distances. The scaling of the scale enables precision reading. Scale is also available on the back. The pointer is visible through a slit in the scale. Mechanical zero adjustment with thumbwheel. Protected against overload by flashing over spark gap. Connection with banana connectors to high voltage insulator and two sockets for ground connection on the top of the instrument. Used in electrostatic tests, often together with power supplies 765-1325 or eg for examination of the charge density on Faraday cages, conductors etc.

Supplier: PHYWE

Phywe's new X-ray equipment is specially developed for teaching purposes. Used in laboratory work and demonstrations from the simplest transilluminations to Bragg diffraction and Compton scattering. Tungsten is normally used as a cathode in X-ray tubes. This means that the voltage must be up to about 65 kV before X-rays are formed. Phywe's X-ray tubes only need 10 to 12 kV for the process to start. For the X-ray equipment, there are 3 different X-ray tubes with the anodes made of Cu, Mo and Fe. These are built as plug-in modules and are replaced in a few seconds. Most laboratories can be connected to Phywe's data measurement system COBRA. The X-ray cabinet is equipped with a large space for experimental setups, clearly visible through a sliding door of acrylic plastic containing lead particles. Two safety switches are connected to the door. The equipment meets the EU requirements for X-ray equipment and is CE Approved.

Supplier: PHYWE

Extremely stable H-foot with 5 attachment points and many combination options. Intended for tripod rods 4 to 12 mm or square tripod rods with a cross section of 4×4 mm to 12×12 mm. If a tripod rod is mounted between two standing feet, a compact, stable and easily movable physics bench is obtained.

Supplier: PHYWE

Made of cast iron with coating of reinforced plastic. Intended for cylindrical stand rods with a diameter of 4 to 15 mm or square stand rods with a cross section of 4×4 to 12×12 mm. A 28×9 mm socket in the bottom of the foot is suitable for ordinary wooden scales, which is why the foot can be used to advantage in, for example, optical experiments.

Supplier: PHYWE

Newton double-scale dynamometers and overload protection. Zero adjustment up to 19 mm with adjusting screw for compensation of different loads eg. when tilted depending on the test setup. Skull length 12 cm for 0,1 mN and 11 cm for the other dynamometers in this series. Measuring accuracy ±0,5% of the measured value. Dynamometer cover length 18 cm.

Supplier: PHYWE

Coil springs made of spring steel. With stirrups at both ends. Suitable for Hook's team and swing attempts.

Supplier: PHYWE

Intended for interconnection of cylindrical rods 4 to 18 mm and/or square rods with a cross section of 4×4 to 12×12 mm. The sleeve can also be used for clamping plates with ∼2 to 14 mm thickness.

Supplier: PHYWE

This experiment shows how fast a vertical pendulum would swing, if it was placed on a foreign celestial body e.g. the moon or March. Phywe's variable g-pendulum can change the plane of oscillation from the vertical, a=0°, up to the horizontal plane, ie a=90°. When a=0°, g acts at full force. If the plane of oscillation is not parallel to the vertical, only g × cos a acts on the pendulum motion. A movement to the moon shows that gravity amounts to about 16.6% of the earth's, which in our pendulum on the earth, corresponds to an angle α=80.5°. The force of attraction in March amounts to 38% of the earth, which can be simulated in the g-pendulum by setting a= 69°.

Supplier: PHYWE

Measuring ranges.

Supplier: PHYWE

Instrument for accurate measurement of rectilinear and alternating magnetic fields. Digital LED display.

Supplier: PHYWE

Describes 70 different experiments, on 288 pages, that can be performed in the areas.

Supplier: PHYWE

With a special addition, the analogue instrument can be turned into a digital instrument with simultaneous analogue display. In order to extend the measurement possibilities, there are also measurements for power and voltage amplification. The replaceable measuring areas are slid into a slot on the top of the instrument ('toaster principle').

Supplier: PHYWE

Educational Materials, Electricity/Magnetism, Application: Physics, Measurement insert for pressure For measurement and demonstration of pressure. Scale graded in bar. Comes with measuring probe and cable

Supplier: PHYWE

Same as 765-1149 but without painting. 50 components incl. Manual.

Supplier: PHYWE

Precision capacitor for electrostatic tests e.g. examination of the relationship between charge, voltage and capacitance. Measurement of the dielectric constant and the electrostatic induction constant. The permanently mounted plate is well insulated while the movable plate is mounted directly in the stand. The distance between the capacitor plates can be adjusted with an accuracy of 0.1 mm. Distance between plates 0 to 70 mm.

Supplier: PHYWE

For demonstration of electric fields between electrodes of different shapes. The electrodes have been applied in thin conductive layers on plexiglass plates and the field line images appear in groats placed in a cuvette with 1 to 2 mm castor oil (the cuvette is placed on the plexiglass plate). The cuvette has an annular electrode in the outer jacket and a 4 mm connection sleeve. The cleaning is easy when electrodes resp. plexiglass plate never comes into contact with the oil. Suitable voltage source: High voltage generator 0 to 25 kV or Van de Graff generator.

Supplier: PHYWE

Used to detect thermal radiation, visible light and ultraviolet light. The sensitivity is wavelength dependent in the range 150 nm-15 µm. The output voltage is closely proportional to the incident radiant energy. Suitable for measuring small temperature differences. Quick stabilization, 2-3 p. Consists of 16 series-connected thermocouples placed in a conical reflector. The elements are protected by a high-gloss metal cylinder, which is fitted with a removable protective glass at the front. Suitable for use with, for example, microvolt amplifiers 765-1293 in conjunction with demonstration instruments 765-1247 or for connection to Phywe's large analog or digital demonstration multimeters. Comes with protective tube and gap.

Supplier: PHYWE

Two identical coils with a diameter of 400 mm (2R), 154 turns of winding each and mounted on separate sockets with connection contacts. Distance between coils 200 mm (R). The coils are held together by three detachable rails. Two of these have brackets for wire beam tubes 765-1206. The coils are used, for example, to provide a homogeneous magnetic field in the wire beam tube. Suitable voltage: 7 V DC (well smoothed) if the coils are connected in parallel and 14 V DC for series connection.

Supplier: PHYWE

TESS OE3 contains 19 components. With TESS OE3 as a complement to TESS OE1 and OE2, another 30 experiments can be performed in the field of wave optics. Delivered in a plywood box.