5453 Results for: "Monel®+400+alloy"

Supplier: Thermo Fisher Scientific

Platinum rhodium alloy (90:10 w%), wire for ISA type S standard grade thermocouple, Ø 0.25 mm (0.01 in)

Supplier: Thermo Fisher Scientific

Molecular Formula: Nd:B:Fe; 15:8:77 atomic%; Magnet Alloy Additive Physical Form: Broken Lump Odour: Odourless MDL No.: MFCD02091729

Supplier: Thermo Fisher Scientific

Palladium silver alloy (75:25 w%) ≥99.9% (metals basis excluding Pt), foil, Thickness: 0.5 mm (0.02 in)

Supplier: Thermo Fisher Scientific

Palladium silver alloy (75:25 w%) ≥99.9% (metals basis excluding Pt), foil, Thickness: 0.25 mm (0.01 in)

Supplier: Thermo Fisher Scientific

Gold germanium alloy (88:12 w%) ≥99.998% (metals basis), slug, Premion®, Length: 3.175 mm (0.125 in), Ø 3.175 mm (0.125 in)

Supplier: Thermo Fisher Scientific

Nickel chromium alloy (80:20 w%) ≥99.95% (metals basis), slug, Length: 3.175 mm (0.125 in), Ø 3.175 mm (0.125 in)

Supplier: Thermo Fisher Scientific

Bismuth indium lead tin eutectic ingot (alloy 136) ≥99.9% (metals basis)

Supplier: Thermo Fisher Scientific

Gold germanium alloy (88:12 w%) ≥99.997% (metals basis), foil, Premion®, Width: 43.8 mm (1.72 in), Thickness: 0.1 mm (0.004 in)

Supplier: OUTILS RUBIS

Cobalt-chromium-molybdenum alloy. These forceps with very high Vicker hardness offer a range of physical, chemical and technological properties that make them appropriate for a wide variety of applications. Exceptional good tolerance on human tissues.

Supplier: Thermo Fisher Scientific

Applications: Iron (III) chloride solution for immersion etching copper, copper alloys and Kovar in printed circuit board applications

Supplier: Brady

The 7 pin disk cylinder in these padlocks gives ultimate prection against manupulation and key interchanges. The shackle and body are made of highest standard hardened alloy steel.

Supplier: Thermo Fisher Scientific

Applications: Magnetic shielding alloy

Supplier: Thermo Fisher Scientific

Nickel plating solution, electroless for copper and copper alloys

Supplier: VWR Collection

Stainless steel. Wire weights up to 500 mg in cobalt alloy.

Supplier: USBECK Laborgeräte

Large table clamp made of powder-coated aluminium alloy.

Supplier: Thermo Fisher Scientific

Copper(II) pyrophosphate hydrate is used in printed circuit boards. It catalyzes the dimerization of isobutylene to diisobutylene. It is involved in the electrodeposition of copper-zinc alloys based electrolytes. Further, it is used in animal feed as a supplement. In addition to this, it is used in plating of copper on plastics, aluminum, and zinc.

Supplier: BOCHEM

Zincked pinch cocks with aluminium screw.

Supplier: VWR Collection

Individual E1 OIML class weights are intended to ensure traceability between the national mass standards (with values derived from the International Prototype of the kilogram) and Class E2 and lower weights. They are also used with microbalances. Anti-magnetic, cobalt alloy weights are available from 1 to 500 mg. Packed in a plastic case, the wire weights are easy to store. Anti-magnetic, corrosion resistant, highly polished stainless steel knob weights are available from 1 to 200 g. Packed in a plastic case the weights are easy to store. Sets of weights are also available in either cobalt alloy or stainless steel with a choice of a plastic or wooden storage box.

Supplier: 2MAG

The aluminium alloy block heater is PTFE coated for chemical resistance and easy cleaning. The combined stirring block heater has 8 stirring positions, 8 holes ( Ø 87,2 mm, depth 78 mm) which are suitable for 250 ml Erlenmeyer flasks.

Supplier: USBECK Laborgeräte

The fingers of the clamps have cork inserts to protect the clamped items.

Supplier: VELP SCIENTIFIC

Magnetic stirrers with coated aluminium alloy top plate that provides even heat distribution and good chemical resistance, widely used in research and development, industrial and university laboratories.

Supplier: Brady

These labelled group lockout hasps are constructed from tough 5052 anodised aluminium alloy.

Supplier: 2MAG

Ideal for viscosity measurements, testing and quality control. The units have a clear digital display for settings of stirrer speed, stirrer power and temperature of the integrated heater. The SoftStart procedure ensures reliable centering and safe acceleration of the stirring bar. The heating block is made of aluminium alloy, PTFE coated for chemical resistance and easy cleaning.

Supplier: VWR Collection

Bossheads made from different materials for universal usage.

Supplier: KINEMATICA

BIOTRONA® design high turbulence mixing. High-turbulence mixing head with low shear forces and energy inputs. Time saving with improved results compared to stirrers and dissolvers of up to 90%. Dispersing generators are made from high-alloy stainless steel 316 L, electropolished, Ra≤1,6 μm as standard.

Supplier: Thermo Fisher Scientific

Gold Palladium (60:40) (w/w) ≥99.9% (metals basis), wire, annealed, Ø 0.2 mm (0.008 in)

Supplier: Thermo Fisher Scientific

Rose's metal (Bi:Pb:Sn 50:25:25 wt%), ingot

Supplier: LGC Standards PROMOCHEM

NIST-107C, cast iron (Ni-Cr-Mo)

Supplier: VWR Collection

For assembling 8, 12, 13, 16 and 21 mm diameter rods.

Supplier: Thermo Fisher Scientific

Neodymium(III) chloride hydrate is used for production of neodymium metal. It also finds application in lasers and fibre amplifiers. It serves as dopants for silica based as well as plastic fibres. It plays an important role of additives in organic light emitting diodes resulting in improved LED emission spectrum. In addition, it is used in catalysis of polymerisation of various dienes. It is used to modify titanium dioxide for use as a photocatalyst. Its coating on aluminium and its alloy protect them from corrosion. It is also extensively used as fluorescent labels for organic molecules.