5453 Results for: "Monel®+400+alloy"

Supplier: Spectrum Laboratories

MediaKap filters are designed to sterilise or clarify culture media or any other aqueous solutions. Can be used as pressure filters with a peristaltic pump, a hand pump or a syringe.

Supplier: Thermo Orion

Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.

Supplier: LGC Standards PROMOCHEM

This standard solution is intended for use as a certified reference material and calibration standard for the analysis of these elements in petroleum products or other organic matrices using inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), rotating disc electrode atomic emission spectroscopy (RDE-AES), flame or furnace atomic absorption spectroscopy (AA or GFAA) and other techniques for elemental analysis.

Supplier: DWK Life Sciences

The WHEATON® OmniSpence® ELITE and UniSpense® PRO are intelligent peristaltic pumps for all dispensing needs. Whether the user is making sterile liquid transfers to and from containers or filling vials or titer plates these pumps will simplify and accelerate the laboratory throughput. It is ideal for any laboratory or clinical setting where accurate and precise liquid dispensing is important.

Supplier: Bohlender

PTFE encapsulated magnetic core (Alnico 5) axially mounted in a guide cage made of PTFE.

Supplier: VWR Chemicals

Phenol Chloroform 5:1 Solution. An optimised mixture that can be used directly to replace the phenol and chloroform recommended in the one-step phenol purification method.

Supplier: MULTIROIR

Hinged lids allow to secure the lid to the tray. Goods are thus protected during transport or storage.

Supplier: VWR Collection

This portable oxygen meter, with maintenance friendly galvanic sensor, is an entry level device suitable for everyday use. Concentrations in mg/L (ppm) and saturation in percentage can be read directly without using tables.

Supplier: KCL by Honeywell

These flock lined nitrile gloves provide high mechanical and chemical resistance. The high abrasion, cut and puncture resistance allows working with sharp edged materials.

Supplier: Ansell

These ambidextrous silicone-free gloves meet the requirements of the electronic device manufacturing and biotechnologies industries.

Supplier: Retsch GmbH

The analytical sieve shaker AS 450 control is used in research and development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtainable even after very short
sieving times. It is suitable for dry and wet sieving.

Supplier: Mettler - Toledo

Portable dual channel meter for the simultaneous determination of pH, mV or ion concentrations and dissolved oxygen.

Supplier: SAFETY FIRST AID GROUP

The Deluxe shatterproof ABS first aid case is the top range first aid storage solution. The cases are made with high quality materials to keep first aid products fresh in damp or dusty environments.
 

Supplier: VWR Collection

User friendly instrument, with articulated electrode stand and IP 43-rated housing, provides high resolution and accuracy for precise multi-parameter measurements. This meter can either measure pH/mV and conductivity or pH/mV and oxygen simultaneously. Complete with USB output for connection to a computer. GLP compliant.

Supplier: IKA

Digital block heaters which hold from one up to four aluminum blocks, provide precise temperature control in small vessels. The PT1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips, Greiner tubes, microplates and cuvettes. The block heaters are ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood/urea nitrogen determinations and in situ hybridisations.

Supplier: Avantor

Avantor® ACE® UltraCore SuperPhenylHexyl solid-core (core-shell) particle columns are ideal for demanding MS work offering improved MS signal intensity and maximum MS response. These stainless steel columns combine high efficiency separations with low column back pressure. The Encapsulated Bonding Technology (EBT™) greatly increases the ligand coverage of the silica surface and effectively eliminates the effect of unbonded silanol groups on separations. This higher ligand coverage results in improved inertness, chromatographic performance and stability.

Supplier: EBRO

The EBI 12-T220 is a precise temperature data logger for process validation in laboratories and the pharmaceutical industry. With a temperature range of –200 to +200 °C and an accuracy of up to 0,05 °C, it enables precise temperature measurements in critical applications such as sterilisation and disinfection.

Supplier: Nitritex

These disposable boot covers are made of BioClean-D™, a lightweight, low linting and hard-wearing fabric (PP laminated with a PE film) which provides maximum comfort and protects against fine sprays and particles.

Supplier: Corning

PS. Designed to reduce well-to-well crosstalk during fluorescent and luminescent assays.

Supplier: EBRO

The EBI 12-T441 is a precise temperature data logger for process validation in laboratories and the pharmaceutical industry. With a temperature range of −200 to +200 °C and an accuracy of up to 0,05 °C, it enables precise temperature measurements in critical applications such as sterilisation, disinfection and ovens.

Supplier: TUTTNAUER

Tuttnauer's ML laboratory line of semi-automatic, electro-mechanically controlled, vertical steam sterilizers provide safe, economical and effective sterilization. The semi-automatic laboratory autoclave series is an affordable sterilizer for laboratories that do not want to compromise on quality, safety and reliability and need to sterilize loads with low sensitivity. The semi-automatic series is available in vertical or benchtop models and in chamber sizes ranging from 23 to 160 litres. The ML models have a semi-automatic control panel, ML models have a manual control panel. The chamber is constructed of long lasting 316L grade stainless steel with superior corrosion resistance. The generator is made from stainless steel.
Sterilisation applications: Lliquids such as nutrient media and buffer solutions, solid items such as pipettes, tubes and filters, glassware and plastic articles.

Supplier: NEW PIG

These lightweight gloves made of Norfoil® laminate provide lightweight protection from corrosive chemicals. They resist permeation and breakthrough of even the most dangerous liquids like aromatics, ketones, alcohols, esters and chlorinated and aliphatic solvents.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Thermo Fisher Scientific

Heratherm refrigerated incubators feature Peltier technology which maintains sample integrity at temperatures from 5 to 70 °C, very low energy consumption and they never need defrosting. Peltier technology ensures temperature uniformity and stability with minimal disruption due to vibrations. The compact units have a stainless steel interior, large clear vacuum fluorescent display and an internal glass door for viewing samples safely.

Supplier: VWR Collection

These economical, robust, and waterproof pH meters are supplied in complete, ready to use kits that incorporate a robust carrying case, electrode and temperature sensor with different cable lengths and buffers.

Supplier: Testo

These digital thermometers provide a probe socket for highly accurate PT100 probes and two sockets for fast action thermocouple probes. Readings from up to three additional temperature probes can be displayed. The data is recorded in the instrument and can be analysed through graphics and tables.

Supplier: EBRO

The EBI 12-TP231 is a compact temperature and pressure data logger designed for process validation in steam sterilisers, washer-disinfectors (WD), and WD-E systems, With high temperature accuracy of up to ±0,05 °C and pressure measurement from 1 to 4,000 mbar, it provides reliable real-time data transmission for critical applications.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request). Spectroquant® cell test kits.

Supplier: Merck

Test kits for quick, semi-quantitative analysis in situ, without the expense of transporting samples to the laboratory. Simple step by step illustrated instructions mean the kits can be used without special chemical training.

Supplier: Avantor

Avantor® ACE® Method Development Kits (MDK) are designed to maximise selectivity, offering a powerful and reliable approach to UHPLC/HPLC method development. Based upon an ultra-inert, high efficiency silica, Avantor® ACE® phases incorporate the latest developments in LC stationary phase design, providing chromatographers with more choices for alternative selectivity, without compromising stability or robustness.