1129 Results for: "LABCONCO"

Supplier: LABCONCO

SteamScrubber™ glassware washers are designed to wash and dry general purpose labware. They have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialised inserts for BOD bottles, petri dishes, culture tubes and small utensils enhance the SteamScrubber's versatility. Also accommodates upper and lower spindle racks.

Supplier: LABCONCO

The Logic® Vue is a specialised class II enclosure providing personnel and product protection for large automated instruments such as liquid handlers. The Logic® Vue provides laminar ISO 5 air.

Supplier: LABCONCO

XPert TXE Equipment Enclosures are designed to address the needs of pharmaceutical research and quality control laboratories.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: LABCONCO

Rotor for 12×15 ml vials (Ø 20 mm × 70 mm), PTFE coated aluminium

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: LABCONCO

6-Pin communication cable, AtmosPure™

Supplier: LABCONCO

Kjeldahl digestion units are designed for laboratories that require separate digestion stations.

Supplier: LABCONCO

Designed to handle the lyophilisation needs of research laboratories. Collectors that reach −50 °C are available with capacities from 1 to 18 litres. Cascade systems in 2,5, 4,5, 6 and 12 litre collector capacities that reach −84 °C are ideal for freeze drying samples with low eutectic temperatures. The FreeZone® −105 °C bench top freeze dryer systems are suitable for samples with very low eutectic points including ones containing small amounts of methanol or ethanol.

Supplier: LABCONCO

Filter cartridge, Deionization cartridge, 1,8 kg

Supplier: LABCONCO

Ionizer fan, anti-static, for 230 V units, 50/60 Hz operation

Supplier: LABCONCO

Glassware carts, used to carry glasswares, plasticwares and small instruments in vinyl-coated wire baskets. Choose from 2-baskets or 4-basket styles complete with removable plastic drip pan to catch spills.

Supplier: LABCONCO

Heavy duty auxillary bench with adjustable height. Durable work surface made of fiber board with high pressure melamine laminates. Supports heavy loads and can hold upto 400 pound, benches up to 540 pounds.

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: LABCONCO

Storage cabinet accessories, Protector®, Interior epoxy coated shelf and mounting hardware, 762 mm width, 4,5 kg

Supplier: LABCONCO

Purifier Logic+ Class II, Type A2 Biosafety Cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. These cabinets are designed to work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. When canopy connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research.

Supplier: LABCONCO

The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

Supplier: LABCONCO

In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Supplier: LABCONCO

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulphur compounds, or ammonia chemical fumes and vapours, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: LABCONCO

Purifier®, Back draft damper adjust the biosafety cabinet's exhaust airflow

Supplier: LABCONCO

The Protector® XL benchtop laboratory hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. These are suitable for general chemistry applications.

Supplier: LABCONCO

Purifier Class I enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection.

Supplier: LABCONCO

The WaterPro® BT Water Purification System produces both RO and Type I water directly from tap water. The benchtop design is compact and lightweight so it can easily be transported from lab to lab. The Filter Pack (required, sold separately) bundles all water filter technologies into one convenient twin cartridge package so installation is simple.

Supplier: LABCONCO

Support stand for WaterPro Purification Systems on horizontal surfaces

Supplier: LABCONCO

Filtered PCR Enclosures direct HEPA-filtered air downward over the work area to provide ISO Class 5 conditions and protect your work from particulate contamination. These specialized vertical clean benches provide a controlled environment in which to perform polymerase chain reaction experiments. These enclosures include a variable digital timer and when the set time expires, the UV light automatically switches off in preparation for the next experiment.

Supplier: LABCONCO

XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.

Supplier: LABCONCO

Nexus Horizontal Clean Benches are designed to protect non-hazardous applications, and meet the rigorous demands of life sciences, materials science applications, pharmaceutical R&D and compounding pharmacies. The Nexus also provides an ISO Class 4 clean airflow environment for protection of critical, non-hazardous samples.

Supplier: LABCONCO

Storage cabinet accessories, Protector®, Solvent vent kit consisting metal flexible hose Ø 38 mm, two hose clamps and slip fit outlet adapter

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.