1164 Results for: "Hanna"

Supplier: Hanna

The HI4101 ammonia-selective electrode is used for detecting gases that have been dissolved in a solution. The detection element is separated from the test solution by a gas permeable membrane.

Supplier: Hanna

Compact, easy to use all-in-one pH meters, ideal for teaching.

Supplier: Hanna

These electrodes feature a built-in microchip that stores sensor type, serial number, and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in. The ability to transfer information allows for hot swapping of probes without having to recalibrate.

Supplier: Hanna

The HI-93728-01 and HI-93728-03 nitrate reagents are suitable for use with the HI-96728 portable photometer and the HI-83200-02 and HI-83099-02 multiparameter bench photometers.

Supplier: Hanna

pH meter, Spare DO probe HI 769828-2

Supplier: Hanna

Reagents for copper, 0,00 - 5,00 mg/l, kit for 300 tests, For: Ion meter HI 93702 (copper)

Supplier: Hanna

Turbidity Standard, Turbidity calibration solution, produced according to the AMCO AEPA-1 standards, 500 FTU, Type: Polymer suspension

Supplier: Hanna

These instruments measure conductivity, TDS and temperature.

Supplier: Hanna

HI 83200 is a versatile photometer capable of measuring up to 44 methods, critical to analysing water quality. The optical system is based on special subminiature tungsten lamps and narrow-band interference filters to guarantee both high performance and reliable results.

Supplier: Hanna

These HI140 dataloggers are designed to monitor temperature continuously over long periods of time.

Supplier: Hanna

K-type probe, Standard, 0…+900 °C, Ø×L: 5×220 mm

Supplier: Hanna

Thermometer probe, Air, 300 °C, Ø×L: 3×250 mm

Supplier: Hanna

This advanced benchtop meter offers all the advanced capabilities for accurate pH measurement with the added feature of a built-in printer (with 44 mm plain paper).

Supplier: Hanna

This high-performance digital thermometer is designed for Laboratory and field use. It is a thermistor thermometer that can be fitted with an optional rubber holster for use outdoors. Current temperature is simultaneously shown along with the highest and Lowest values since switch on.

Supplier: Hanna

The HI 93532 features two K-type connectors. It displays current temperature, high and low values in each channel. The CAL button allows to perform a one point calibration in an ice bath at 0 °C when probe interchange occurs.

Supplier: Hanna

Ink cartridge for printer, For: Hanna HI 123

Supplier: Hanna

HI-3090T is a combination glass body ORP electrode with platinum sensor.

Supplier: Hanna

These millesimal buffer solution are NIST traceable.

Supplier: Hanna

pH Buffer solution, pH value: 3,00, ±0,01, Reference temperature: 25 °C, Plastic bottle

Supplier: Hanna

These ion selective electrodes are available as solid state half-cell sensors that require a separate reference or as combination electrodes complete with reference electrode. They are designed for measurements of either cyanide, cupric or fluoride ions in aqueous solutions.

Supplier: Hanna

Electrode, Conductivity, HI 76310, 4-ring, with built-in temperature sensor, For: HI 3512, HI 2300, HI 2550, Platinum, 1 m cable

Supplier: Hanna

These multiparameter photometers measures free chlorine and total chlorine in water samples. they incorporate an advanced optical system based on a special tungsten lamp and a narrow band interference filter that allows the most accurate and repeatable readings. The HI 96710 can detect pH, free chlorine and total chlorine the three critical parameters to ensure the good quality of water.

Supplier: Hanna

Redox electrode, ORP electrode HI 3619D; range ±2000 mV, platinum pin tip, Glass, Diaphr.: Ceramic, single, 7-pin DIN, 1 m cable

Supplier: Hanna

These elecrodes with self-cleaning flat tip sensor are specifically designed for plating baths. The flat tip also virtually eliminates deposits that can foul the electrode, significantly reducing necessary maintenance. This characteristic makes flat tip electrodes ideal for continuous in-line monitoring and for solutions containing aggressive chemicals.

Supplier: Hanna

Blue impact-resistant rubber boot for thermometer HI 9241

Supplier: Hanna

This instrument is able to perform pH, ORP and temperature measurements with a high degree of accuracy and fast response. The included pH probe can be replaced with an ORP probe to obtain ORP readings in the mV range. Ideal for agriculture applications.

Supplier: Hanna

This handheld conductivity meter has been designed for use in areas of production and quality control. The meter utilises four ring potentiometric probes that offer greater versatility over typical amperometric designs. These rugged probes are made of PVC — ideal for indoor, as well as outdoor measurements.

Supplier: Hanna

This cantilever stand holds three electrodes in any position.

Supplier: Hanna

Shock-proof rubber boot for meter, blue, For: Hanna meters, handheld

Supplier: Hanna

The shockproof rubber case prevents instruments from damage due to accidental impact.