1164 Results for: "Hanna"

Supplier: Hanna

This instrument is able to perform pH, ORP and temperature measurements with a high degree of accuracy and fast response. The included pH probe can be replaced with an ORP probe to obtain ORP readings in the mV range. Ideal for agriculture applications.

Supplier: Hanna

Blue impact-resistant rubber boot for thermometer HI 9241

Supplier: Hanna

These multiparameter photometers measures free chlorine and total chlorine in water samples. they incorporate an advanced optical system based on a special tungsten lamp and a narrow band interference filter that allows the most accurate and repeatable readings. The HI 96710 can detect pH, free chlorine and total chlorine the three critical parameters to ensure the good quality of water.

Supplier: Hanna

The HI 5222 is an advanced research grade benchtop meter with two galvanically isolated input channels, colour display, capacitive touch keys and USB port.

Supplier: Hanna

Handheld thermo-hygrometer is a compact, portable and designed to provide peak performance and high accuracy temperature and relative humidity (RH) readings anywhere.

Supplier: Hanna

Pure Water Test (PWT) enables users to check the purity of distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralised or pure water is used.

Supplier: Hanna

This handheld conductivity meter has been designed for use in areas of production and quality control. The meter utilises four ring potentiometric probes that offer greater versatility over typical amperometric designs. These rugged probes are made of PVC — ideal for indoor, as well as outdoor measurements.

Supplier: Hanna

These millesimal buffer solution are NIST traceable.

Supplier: Hanna

Electrode, Conductivity, Edge™, Conductivity sensor HI 763100, 4-ring, with temperature sensor, For: General purposes, Platinum, easyPlug 3,5 mm

Supplier: Hanna

Hanna pocket checkers offer a cost-effective digital alternative to visual chemical test kits. Ideal for regular water testing, swimming pool testing and for aquaculture hobbyists.

Supplier: Hanna

Accessory for turbidity meter, Cell measurement set for honey (75 tests) with square cuvettes (82), glycerol (30 ml) and two syringes (5 ml)

Supplier: Hanna

CAL Check™ Standard for Cyanuric acid 0,0 and 8,00 ppm, CAL Check™, : N/A

Supplier: Hanna

The HI 96101 multiparameter photometer is used to measure Bromine, Free and Total Chlorine, Cyanuric Acid, Iron, Iodine and pH content in water and wastewater samples. The reagents are in powder and liquid form depending on the parameter.

Supplier: Hanna

Generally, ground and surface water contains no more than 1 mg/L (ppm) iron; but due to mining and industrial drainage, higher levels of iron have been observed. In domestic water, for instance, iron can unpleasantly alter the taste, stain laundry, damage kitchenware and favor the growth of certain bacteria. Iron is also an indicator of ongoing corrosion in industrial plants or in water cooling and heating systems. Moreover, iron is normally monitored in mining wastewater to avoid contamination.

Supplier: Hanna

The Hanna HI-839800 thermo-reactor is an easy to use test tube heater with the capacity to perform up to 25 simultaneous digestions. Complete with a countdown timer, it can be used for timed or infinity testing procedures. Robust and durable, the main body is machined from a single block of metal. Temperature within the block is controlled using a sophisticated electronic thermostat and can be verified by placing a thermometer in the temperature well provided.

Supplier: Hanna

This reliable and easy to use meter comes with pre-amplified pH electrode and internal temperature sensor. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy.

Supplier: Hanna

Ammonia solution 0.1 mol/l (0.1 N)

Supplier: Hanna

The HI 935005 (single channel) is a waterproof thermometer. It can be switched off after 8 or 60 minutes of non-use, or it can be deactivated.
The HI 935002 (dual channel) thermometer is suitable for extended use in the field. The difference between the two channels can be displayed. Data is continuously updated on one channel or the other.

Supplier: Hanna

Range of microprocessor controlled, handheld, single parameter colorimeters using a monochromatic LED and chemical reagents to promote a colour change within the sample.

Supplier: Hanna

The HI-83214 multiparameter photometer is a compact instrument designed for COD analysis in accordance with EPA 410.4 and ISO 15705:2002 standards. It also features different parameters, ranges and methods making it suitable for a wide range of water testing applications.

Supplier: Hanna

The HI4102 bromide-selective electrode is used for the determination of free bromide ions in emulsified food products, beverages, plants, soils and as an indicator for titration.

Supplier: Hanna

The HI4101 ammonia-selective electrode is used for detecting gases that have been dissolved in a solution. The detection element is separated from the test solution by a gas permeable membrane.

Supplier: Hanna

Compact, easy to use all-in-one pH meters, ideal for teaching.

Supplier: Hanna

These electrodes feature a built-in microchip that stores sensor type, serial number, and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in. The ability to transfer information allows for hot swapping of probes without having to recalibrate.

Supplier: Hanna

The HI-93728-01 and HI-93728-03 nitrate reagents are suitable for use with the HI-96728 portable photometer and the HI-83200-02 and HI-83099-02 multiparameter bench photometers.

Supplier: Hanna

pH meter, Spare DO probe HI 769828-2

Supplier: Hanna

Reagents for copper, 0,00 - 5,00 mg/l, kit for 300 tests, For: Ion meter HI 93702 (copper)

Supplier: Hanna

Turbidity Standard, Turbidity calibration solution, produced according to the AMCO AEPA-1 standards, 500 FTU, Type: Polymer suspension

Supplier: Hanna

These instruments measure conductivity, TDS and temperature.

Supplier: Hanna

HI 83200 is a versatile photometer capable of measuring up to 44 methods, critical to analysing water quality. The optical system is based on special subminiature tungsten lamps and narrow-band interference filters to guarantee both high performance and reliable results.