1483 Results for: "HAMILTON BONADUZ"

Supplier: HAMILTON BONADUZ

Syringe TLL, 25 ml, Microlab®

Supplier: HAMILTON BONADUZ

For full information concerning health and safety data please contact Avantor or Hamilton directly.

Supplier: HAMILTON BONADUZ

These electrodes are especially well suited for Knick® Portamess® equipment. The electrode head creates a hermetic seal with the Portamess® storage tube.

Supplier: HAMILTON BONADUZ

These headspace syringes feature a unique Glue-Free (GF) needle attachment in combination with a High Dynamic (HD) plunger. They are designed specifically for PAL COMBI–xt® headspace autosamplers. Conventional headspace syringe needles are attached to the syringe glass body using glue (cement). Common problems are detached needles or ghost peaks due to low chemical inertness of the cement to solvents or limited resistance to higher temperature. These problems are addressed with the Glue Free High Temperature (HDHT) headspace syringes.

Supplier: HAMILTON BONADUZ

The Single Pore concept stands for precise, reliable, and fast readings with a proven, patented system that ensure optimal contact between the electrolyte and the sample.

Supplier: HAMILTON BONADUZ

RCX-30 carbohydrate analysis columns are designed for the isocratic or gradient separation of carbohydrates. When an isocratic method is used with a conductivity, refractive index, ultraviolet, or pulsed amperometric detector (PAD), mono and disaccharides such as glucose, fructose, sucrose and lactose can be quickly determined.

Supplier: HAMILTON BONADUZ

HC-75 columns separate compounds through ligand exchange. The different forms of the HC-75 (hydrogen, calcium and lead) each provide a unique selectivity for separating varying types of charged analytes based on electronegativity toward the counterion.

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

Silica-based 100 Å columns for general reversed phase separations.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

The compression fittings and adaptors are designed to connect Hamilton removable needle (RN) and knurled hub (KH) syringes to glass capillary tubing and PEEK tubing. The connectors can be combined in a variety of different configurations to meet most connection needs.

Supplier: HAMILTON BONADUZ

Specifically designed for rapidly cleaning 7000 series modified Microliter™ syringes, this syringe cleaner also effectively cleans Microliter™ and Gastight® syringes. A combination of heat (approximately 370 °C) and vacuum vaporises and extracts contaminants from the needle. The syringe cleaner is ineffective for septa-plugged needles, seised plungers and other irreparable needles.

Supplier: HAMILTON BONADUZ

These tips are validated to optimise the performance of the Microlab 300 system, offering superior accuracy and precision. When the tips are placed onto the probe, the O-ring on the probe compresses into the tip groove. This design only requires a low insertion force to successfully load a tip, resulting in a more ergonomic experience for the user and enabling long-term use with minimal energy exerted.

Supplier: HAMILTON BONADUZ

The Microlab® 600 dispensers are highly precise syringe pumps with a touchscreen graphical user interface designed to quickly and easily dispense liquids. This positive displacement system provides better than 99% accuracy, independent of liquid viscosity, vapour pressure and temperature. The inert fluid path minimises sample carry over and improves compatibility with harsh chemicals. There are three different dispenser models available.

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, Gastight®, HPLC/GC, 1010 TLLCH, Volume: 10000 µl, Gauge: No needle included, Length: No needle included, Pk: 1

Supplier: HAMILTON BONADUZ

These syringes are used for GC autosamplers.

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

This line of syringes developed for Spark Holland HPLC autosamplers offer everything required of an instrument syringe: chemical inertness, long life, reduced friction, precision and accuracy.

Supplier: HAMILTON BONADUZ

These gas tight syringe are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

Analytical guard cartridge holder for PRP-X100, RCX-10, RCX-30, PRP-X110, PRP-X500, PRP-X600 guard columns, PEEK

Supplier: HAMILTON BONADUZ

PRP-3 polymeric reversed phase columns are ideal for gradient separations of peptides and proteins. The columns are packed with a poly(styrene-divinyl)benzene support.

Supplier: HAMILTON BONADUZ

PRP-1 polymeric HPLC columns are designed for broad ranging uses, similar to C8 or C18 HPLC materials. They combine the best characteristics of silica-based and polymeric columns resulting in highly inert and long-lasting columns. These columns are ideal for applications that require a high degree of column to column and batch to batch consistency (quality assurance, clinical trials). Unlike C8 or C18 columns, PRP-1 has no stationary phase coating. Since there is no stationary phase to hydrolyse, the column maintains its performance characteristics longer than many C8 or C18 columns.

Supplier: HAMILTON BONADUZ

Gas tight syringes made of borosilicate glass or PTFE with Luer tip termination.

Supplier: HAMILTON BONADUZ

These preconditioned silicone rubber septa are 3,81 mm thick.

Supplier: HAMILTON BONADUZ

These syringes allow the collection, storage, transport and analysis of liquid or gaseous samples without the danger of evaporative loss or environmental contamination.

Supplier: HAMILTON BONADUZ

PRP-X600 is a superficially porous weak-base anion exchange support that separates DNA oligomers according to negative charge.

Supplier: HAMILTON BONADUZ

Polymer bulk packing material for anion exchange applications.

Supplier: HAMILTON BONADUZ

This brushed stainless steel rack is used for clean and safe storage of syringes with plastic holder. A lip on the plastic holder protects the syringe against accidental touching and falling down. The distance of the plastic holder prevents the syringe from getting in contact with the metal plate.

Supplier: HAMILTON BONADUZ

Syringe, chromatography, HPLC, Syringes, 1750 C, 1/4-28 thread, Model 1750 C, Volume: 500 µl, Pk: 1