701 Results for: "CHROMACOL"

Supplier: CHROMACOL

* The 548-1146 is the only crimp cap recommended for 548-1183 vials. Alternatively please use 548-1151 (ideal for single injections).

Supplier: CHROMACOL

This fully programmable electronic High Power Crimper (HPC) station is available with adjustable accessory base, external power supply and exchangeable jaw sets for crimping or removal of aluminium and stainless steel seals on 8, 11, 13 and 20 mm diameter vials.

Supplier: CHROMACOL

Allows users to work with very small samples where the total amount has to be injected, residual volume <4 µl. Micro-insert not needed.

Supplier: CHROMACOL

A modification to the commonly used crimp sealed headspace vial that gives the screw cap version more flexibility and wider applications yet maintaining the capabilities of the headspace vial. Can be used in headspace, SBSE (Stir Bar Sorbent Extraction), SPME and 'electronic nose' applications.

Supplier: CHROMACOL

PP, non coated, non sterile, chromatography tested. Manufactured from ultra low bleed high purity basis resin and fully lot tested by GC/MS for organic extractables.

Supplier: CHROMACOL

This cutting tool allows removal of individual vials as a sealed unit, if required.

Supplier: CHROMACOL

Wide opening screw neck vials, Chromacol™

Supplier: CHROMACOL

Replacement tape, For: Vial identification system, Virtuoso™

Supplier: CHROMACOL

High purity 20 mm silicone/PTFE seal for liquid-liquid extraction and trace analysis. PTFE thickness 0,02 mm and silicone 3 mm.

Supplier: CHROMACOL

Chromacol™, Chromatography vial closure, Aluminium, Ø: 20 mm, Magnetic crimp cap blank, tin plate, Silicone/PTFE/liner, Type: 20-MCB-ST3

Supplier: CHROMACOL

Chromacol™, Chromatography vial closure, Nickel, Ø: 18 mm, Silver steel magnetic screw cap, 8 mm hole, Type: 18-MSC-CBT3, Hardness: 52° shore, Septum: Moulded blue chlorobutyl/grey PTFE, Thickness: 3,0 mm

Supplier: CHROMACOL

Headspace vial convenience kits, Chromacol™

Supplier: CHROMACOL

Chromacol™, Chromatography vial closure, PP, Ø: 9 mm, Blue screw cap, open top with 6 mm hole, Type: 9-SC(B)-ST1, Hardness: 57 °shore A, Septum: White silicone/red PTFE, Thickness: 1,0 mm

Supplier: CHROMACOL

These headspace closures with thinner penetration area septa for SPME are suitable for crimp neck and screw neck vials. The thinned area still contains a silicone layer for resealing after needle extraction.

Supplier: CHROMACOL

PP screw caps with or without seals.

Supplier: CHROMACOL

These storage vials are made of class 1 hydrolytic extraction neutral borosilicate glass to provide sample stability and low extraction.

Supplier: CHROMACOL

Chromacol™, Chromatography vial closure, PE, Ø: 11 mm, Snap-cap, suitable for PerkinElmer (LC), pre-cut, Type: 11-PEC1X

Supplier: CHROMACOL

These wide opening screw neck, crimp top and snap top vials are designed exclusively for use with the Virtuoso™ vial identification system. They are made of superior quality 33 expansion borosilicate clear Type 1, Class A.

Supplier: CHROMACOL

PP 96-well square well plate for 1 ml vials (K107/K108/K109), plate only

Supplier: CHROMACOL

Chromacol™, 20 mm decapper jaw set

Supplier: CHROMACOL

Pure silicone with PTFE coating on underside.

Supplier: CHROMACOL

Chromacol™, Chromatography vial closure, PE, Ø: 11 mm, Blue 11 mm PE snap-cap with blue silicone/PTFE seal, 6 mm hole, Type: 11-PSN(B)-ST101

Supplier: CHROMACOL

A range of 96-well, PP, chromatography tested, barcoded well plates for the Thermo Scientific™ Vanquish™ and Vanquish™ Flex UHPLC machines. The barcodes indicate the correct orientation of the plate to ensure the correct position in the autosampler and charger unit when loading and running the analytical sequence. Plates cannot be accepted in the wrong orientation.

Supplier: CHROMACOL

* Ideal for micro sampling. Should be used with S-10 (10 mm steel support spring).

Supplier: CHROMACOL

Chromacol™, Vial insert, 0,20 ml, Glass, Ø×H: 6×30 mm, Conical bottom, Non sterile, Cap included: No

Supplier: CHROMACOL

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Silicone sealing mat, solvent resistant, pre-slit, 96 round well, Ø 8 mm, clear, Well top shape: Round, Silicone, Pierceable, Non sterile

Supplier: CHROMACOL

Cap for scintillation vial, PE lined, Chromacol™

Supplier: CHROMACOL

These vials are used for dry powder weighing and dispensing. The walls of these vials are free of neck constrictions and traps.

Supplier: CHROMACOL

Avcs 9mm pink cap with t/rr sept

Supplier: CHROMACOL

Avcs 9mm blk cap and ts sept