423 Results for: "CARESTREAM+HEALTH"

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: IDEX RHEODYNE

The Rapid Replacement Pod™ (removable liquid-end) design of the TitanHP™ and TitanHT™ platforms make it easy to replace valve's wear components. The entire Pod™ can be purchased separately and replaced as a unit with nearly no instrument downtime for repair. The Pods™ can then be rebuilt at a later time with genuine Rheodyne® RheBuild® kits.

Supplier: Rubbermaid Commercial Products

The mobile barrier is easy to use, easy to see, easy to move, and easy to store.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, C-425 frit, Porosity: 0,5 µm, Thickness: 0,71 mm, Frit Ø ext.: 1,0 mm, Frit volume: 0,1 µl, Frit material: Stainless steel, Ring ext. Ø: 4,87 mm, Ring material: PCTFE

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: Rubbermaid Commercial Products

A defence against slip-and-fall injuries in yellow.

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: UPCHURCH SCIENTIFIC

This narrow-bore short column (2,0×20 mm) creates only a slight pressure increase with virtually no detectable theoretical plate loss when used with a 3 mm int.Ø or larger column.

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: Oxford Nanopore Technologies

This expansion is recommended for users who want to make use of unused barcodes to maximise the use of their Native Barcoding Kits.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: COLLECTION PREFIX HPLC

The Systec® Stand-Alone Prep-Scale HPLC vacuum degassing systems is high-efficiency, in-line modules that remove dissolved gases from the mobile phase. Their unique design assures reliable continuous operation and the highest level of performance available without the need for helium sparging. Up to five solvent lines may be degassed simultaneously by one unit.

Supplier: Oxford Nanopore Technologies

Additional sequencing buffer, elution buffer, and loading beads.

Supplier: UPCHURCH SCIENTIFIC

Exceptionally uniform porosity which ensures longer filtration life and consistent frit-to-frit swept volumes. These frits are biocompatible and inert to most solvents, making them ideal for bioanalytical applications. The disc rings, made of PCTFE, are slightly thicker than the frit disc, providing enhanced sealing and excellent chemical resistance.

Supplier: Oxford Nanopore Technologies

DNA or RNA for sequencing control experiments.

Supplier: Brady

UHF RFID on-metal label is recommended for tagging on-metal, liquids, plastic, and other typically hard to read products and surfaces.

Supplier: VWR Chemicals

Surface sampling sponges in two forms: Dry sponge sterile sampling bag with write-on strip, containing a dry, biocide-free cellulose sponge, or wet sponge sterile sampling bag, with a foil-sealed, pre-moistened cellulose sponge, and 10 ml of sterile neutralising buffer.

Supplier: Oxford Nanopore Technologies

Additional flow cell priming reagents to enable additional loading of more library during a sequencing run.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: Showa

These unsupported, non powdered PVC gloves protect the hand against chemicals. As they are impermeable they can be used in damp or greasy environments.

Supplier: VWR Chemicals

Solutions prepared from AnalaR® NORMAPUR® grade analytical reagents.

Supplier: Ansell

These nylon/acrylic gloves with full PVC coating provide mechanical and cold protection.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: Oxford Nanopore Technologies

GridION™ - a self-contained, easily deployable DNA/RNA benchtop nanopore sequencer.

Supplier: Onemed Sverige AB

Disposable, powder-free examination gloves for non sterile environments. Ideal for general purposes as well as for food handling (Not suitable for fatty foodstuffs).

Supplier: KIMBERLY CLARK

Kimtech™ Polaris™ Nitrile Gloves are built for science, made and designed for use in laboratories, life science applications, and non-sterile pharmaceutical manufacturing environments.

Supplier: KIMBERLY CLARK

Kimtech™ Polaris™ Xtra Nitrile Gloves are built for science, made and designed for use in laboratories, life science applications, and non-sterile pharmaceutical manufacturing environments.

Supplier: ELMA SCHMIDBAUER

Elma Mutebox facilitates optimum cleaning, every time. It is hygienic, low-noise and environmentally friendly.