3503 Results for: "Binder"

Supplier: Binder

deconex® SOLARSEPT is used for disinfection when a short exposure and drying time is required.

Supplier: Binder

Standard Incubator

Supplier: Binder

Multi-functional drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable temperature safety device, Class 2 (DIN 12880) with visual alarm and adjustable ventilation by means of front ventilation slide and rear 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. GLP/GMP compliance is assisted by the RS422 interface and by optional APT-COM™ DataControlSystem software.

Supplier: Binder

Shelf perforated KB(W) 400

Supplier: Binder

CO₂ Incubator

Supplier: Binder

The Binder FP series of material test chambers with mechanical convection and program functions provide reliably short drying times and particularly fast heating – even for chambers under full loads.

Supplier: Binder

Thanks to thermoelectric cooling technology with heat dissipation, KB ECO cooled incubators are one of the most energy efficient cooling incubators on the market. The thermoelectric cooling technology means the KB ECO series is also very quiet during operation.

Supplier: Binder

Installation and comissioning, For: For all WIC sizes

Supplier: Binder

Additional universal access port DN 40, for leading sensors or supply lines into the chamber, For: Vacuum drying chambers, VD and VDL series

Supplier: Binder

The MFK series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for complex standards-based climatic testing. The units are ideal for rapid temperature changes with humidity control with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Binder

Accessories for vacuum ovens, VD and VDL ranges

Supplier: Binder

Standard Incubator

Supplier: Binder

Two versions of these incubators with electronically controlled APT.line™ preheating chamber are available depending on the application: The BD series with natural convection for all standard applications and the BF series with forced convection for applications with high load density.

Supplier: Binder

Stacking adapter, for direct thermal decoupled stacking of 2 incubators, For: C 150

Supplier: Binder

A compact device with hydraulic-mechanical control for precise, reliable incubation conditions. Optimum temperature range at 37 °C. Unit has galvanised sheet steel housing, powder coated throughout to afford maximum protection against corrosion, hydraulic-mechanical thermostat with analogue dial thermometer.

Supplier: Binder

Reinforced inner chamber. Max. total load 180 kg, KB PRO 470

Supplier: Binder

Calibration certificate, temperature - for temperature, measurement in center of chamber at specified temperature, KB 65, KB 130, KB 260, KB 470, KB 720, KB 1060

Supplier: Binder

The MKT series of dynamic climate chambers has been specially developed as precision heating and cooling chambers for industrial material testing and environment simulation applications. The units are ideal for rapid temperature changes with a low temperature range down to –70 °C and have a higher capacity which exceeds the capability of normal testing chambers. The stainless steel inner chamber has door heating, a heated viewing window with LED interior lighting and programmable condensation protection for the test materials.

Supplier: Binder

Climatic chamber

Supplier: Binder

Factory fitted options for vacuum ovens, VD and VDL ranges

Supplier: Binder

The MK series chambers are suitable for all heat and cold tests from –40 to 180 °C. This is an alternative to complex individual solutions for cyclical temperature tests.

Supplier: Binder

Cooled Incubator

Supplier: Binder

Stainless steel rack, For: BD 56

Supplier: Binder

Accessories for drying ovens with natural convection ED series, Avantgarde.Line

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

Dry-air purge connection, For: MKT 115

Supplier: Binder

Temperature test chamber

Supplier: Binder

Shelves, Stainless steel shelf, For: BF/FD/FED 260

Supplier: Binder

Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.