You searched for: Chromatography Standards
Frequently used for calibration, the chromatography standards have a known concentration to test separating equipment for performance faults. Analytical equipment error would impact the dependability of retention time, purity, molecular weight, and compound identification conclusions. Improving data quality, the substances allow personnel to plot analyte signal ratios and obtain concentrations from a calibration curve. Chromatography standards verify instruments are suitable for intended ion exchange, gel filtration, and hydrophobic interaction procedures.
VWR® PESTINORM®, Dichloromethane (DCM) Stabilised, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
Poly(butyl acrylate) solution, Mw 60000 (Typical), average Mn 20000 (Typical), analytical standard, Supelco®
Supplier: Merck
GPC Standard, Poly(butyl acrylate) solution, Mw 60000 (Typical), average Mn 20000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard
Expand 1 Items
Polyethylene glycol Standard ReadyCal Set Mp 200-1200000, for GPC, Supelco
Supplier: Merck
Set contains 10 different polyethylene glycol/polyethylene oxide standards with Mp ~194, ~970, ~2010, ~4450, ~15000, ~22100, ~62000, ~217000, ~490000, ~1190000; always 3 or 4 standards are lyophilised in a 1,5 ml vial (black, blue or yellow); for 1 complete calibration use one of each of the black, blue and yellow vials; 1 set contains 30 vials for 10 complete calibrations.
Expand 1 Items
Polar column test mix, certified reference material, Supelco®
Supplier: Merck
Polar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL each component in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL
Expand 1 Items
Poly(Bisphenol A carbonate) analytical standards kit, molecular weight series, for GPC
Supplier: Merck
Poly(Bisphenol A carbonate) (PC) is a thermoplastic material. It is injected in molding operations and is majorly studied to understand its thermal behaviour, especially thermal degradation property.
Expand 1 Items
HPLC gradient system diagnostics mix, in methanol: water (3:2) (varied concentration), certified reference material, Supelco®
Supplier: Merck
This formulation is designed for evaluating how reliably a chromatographic system is providing such fundamentally important parameters as flow rate, proportioning, and mixing.
Expand 1 Items
VWR® PESTINORM®, Cyclohexane, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR®, N,N-Dimethylformamide, secondary reference standard for GC, PESTINORM®
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
Peptide and protein MALDI-MS calibration kit, ProteoMass™, Supelco®
Supplier: Merck
This kit features a convenient selection of pre-qualified standard peptides, proteins, matrices, and solvents for calibrating and testing matrix assisted laser desorption ionisation (MALDI) mass spectrometers.
Expand 1 Items
Poly(acrylic acid sodium salt) analytical standards, for GPC
Supplier: Merck
Poly(acrylic acid sodium salt) is a hydrophilic polymer, which can find wide applications in the production of consumer product like diapers, because of its ability to absorb many more times its mass in water.
Expand 3 Items
Polyethylene glycol Standard ReadyCal Set Mp 102-40′000, for GPC
Supplier: Merck
Set contains 12 different polyethyleneglycol standards with Mp ~106, ~330, ~420, ~600, ~1500, ~2010, ~3120, ~6240, ~8600, ~12000, ~23000, ~40000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations
Expand 1 Items
Reference substances for GC analysis, Supelco®
Supplier: Merck
Reference substances can be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis. They serve also for the characterisation of GC column properties.
Expand 3 Items
Poly(dimethylsiloxane) analytical standard, for GPC
Supplier: Merck
Poly(dimethylsiloxane) [PDMS] is a polymer. It is a stable silicone rubber. It has been used as ion selective membrane for ion-sensitive field-effect transistors, as spring material in accelerometers, elastomer on a tactile sensor and as flexible encapsulation material in decouple sensors.
Expand 1 Items
Programmed test mix, in dichloromethane (varied conc.), certified reference material, Supelco®
Supplier: Merck
This test mix is based on the comprehensive mix developed by Grob (Grob, et al., J. Chromatogr. 156 (1978) p. 1)
Expand 1 Items
Nonpolar column test mix, certified reference material, Supelco®
Supplier: Merck
Nonpolar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL
Expand 1 Items
VWR® PESTINORM®, 1,2-Dichloroethane, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
MALDI validation set polystyrene Mp ~700 - 70000, certified reference material, Supelco®
Supplier: Merck
MALDI Standards are suitable for the validation and comparison of MALDI-ToF instruments. Certificates provide MALDI spectra including Mw, Mn and Mp values of select narrow polymers, which differ in molar mass.
Expand 1 Items
VWR® PESTINORM®, Fatty Acid Methyl Esters (FAME) Standards for GC
Supplier: VWR Chemicals
Avantor offers an extensive range of FAME standards as Certified Reference Materials under the well-known PESTINORM® brand.
Expand 23 Items
VWR® PESTINORM®, Ethanol, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, 1-Propanol, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, Toluene, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, n-Hexane, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR®, n-Heptane, secondary reference standard for GC, PESTINORM®
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, Tetrahydrofuran (THF), Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, 2,2,4-Trimethylpentane, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, tert-Butyl Methyl Ether, Secondary Reference Standard for GC
Supplier: VWR Chemicals
A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
Polystyrene (low molecular) Standard ReadyCal Set M(p) 250-70000 for GPC
Supplier: Merck
Set contains 12 different polystyrene standards with Mp ~266, Mp ~374, Mp~1100, Mp~1920, Mp~2950, Mp ~4870, Mp ~7200, Mp~10400, Mp ~15700, Mp ~19600, Mp ~34800, Mp ~67500; always 4 standards are lyophilised in a 1,5ml vial (yellow, blue or black); for 1 complete calibration use one of each of the yellow, blue and black vials; 1 set contains 30 vials for 10 complete calibrations.
Expand 1 Items
VWR® PESTINORM®, Di-isopropyl Ether, Stabilised, Secondary Reference Standard for GC
Supplier: VWR Chemicals
Stabilised with BHT (2,6-Di-tert-butyl-p-cresol, 2,6-Di-tert-butyl-4-methylphenol, Ionol) 40 ppm. A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
VWR® PESTINORM®, 1,4-Dioxane, Stabilised, Secondary Reference Standard for GC
Supplier: VWR Chemicals
Stabilised with BHT (2,6-Di-tert-butyl-p-cresol, 2,6-Di-tert-butyl-4-methylphenol, Ionol) 20 ppm. A secondary GC solvent reference standard for various chromatographic and analytical applications.
Expand 1 Items
Standards for saturated/monounsaturated fatty acids, LC-MS mixture
Supplier: Cayman Chemical
Saturated or monounsaturated fatty acid LC-MS mixture contains various saturated or unsaturated fatty acids. The mixture is supplied in an amber ampule in which the headspace has been purged with argon to prevent lipid oxidation. This product has been designed for direct use in LC-MS applications.