You searched for: Chromatography Standards

Supplier: Cayman Chemical

Saturated or monounsaturated fatty acid LC-MS mixture contains various saturated or unsaturated fatty acids. The mixture is supplied in an amber ampule in which the headspace has been purged with argon to prevent lipid oxidation. This product has been designed for direct use in LC-MS applications.

Supplier: VWR Chemicals

Due to its excellent separation capacity and its high sensitivity gas chromatography is a widely used technique for analytical purposes. In order to get proper identification and quantification results of the analysed compounds, reference standards are needed. These PESTINORM® reference substances can be used for the characterisation of GC column properties. In addition they may also be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis.

Supplier: Merck

GPC Standard, Poly(Bisphenol A carbonate), Supelco®, Analytical standard

Supplier: Merck

GPC Standard, Poly(dimethylsiloxane), average Mw 95000 (Typical), average Mn 50000 (Typical), Supelco®, Analytical standard

Supplier: Merck

Standard for GC, Test mixture 2 for apolar capillary columns according to Grob, Supelco®, ready-to-use

Supplier: Merck

Polar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL each component in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL

Supplier: Resonac

Size Exclusion Standard, Standard P-82, 0,2 g × 8 standards, with MW range 5000 - 800000, pullulan

Supplier: Merck

GPC Standard, ~18600,Mw, Mw/Mn <1,20, Supelco®

Supplier: Merck

Poly(α-methylstyrene) may find applications as a radical producing agent, in the thermal degradation of polystyrene.

Supplier: Merck

This kit features a convenient selection of pre-qualified standard peptides, proteins, matrices, and solvents for calibrating and testing matrix assisted laser desorption ionisation (MALDI) mass spectrometers.

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix 2, TraceCERT®, Supelco®, in acetonitrile: water (varied conc.) solution, Certified reference material, Pk Info: ampule of 1 mL

Supplier: Merck

Set contains 12 different polystyrene standards with Mp ~374, ~1620, ~3420, ~9130, ~18100, ~32500, ~67500, ~128000, ~246000, ~659000, ~1000000, ~2180000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations.

Supplier: Merck

Set contains 10 different polyethylene glycol/polyethylene oxide standards with Mp ~194, ~970, ~2010, ~4450, ~15000, ~22100, ~62000, ~217000, ~490000, ~1190000; always 3 or 4 standards are lyophilised in a 1,5 ml vial (black, blue or yellow); for 1 complete calibration use one of each of the black, blue and yellow vials; 1 set contains 30 vials for 10 complete calibrations.

Supplier: Merck

GPC Standard, Mw 159,000 (Typical), Supelco®, Glass bottle

Supplier: Merck

GPC Standard, Poly(lauryl methacrylate) solution, Mw 570000 (Typical), average Mn 290000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix, in methanol: water (3:2) (varied conc.), TraceCERT®, Supelco®, Certified reference material, Pk Info: ampule of 1 mL

Supplier: Merck

Poly(ethylene glycol) is the most widely used non-ionic, hydrophilic polymer, which can find wide applications in biomedical industry such as in drug delivery systems.

Supplier: Merck

This formulation is designed for evaluating how reliably a chromatographic system is providing such fundamentally important parameters as flow rate, proportioning, and mixing.

Supplier: Merck

GPC Standard, Polystyrene, average Mw 290000 (typical), average Mn 130000 (typical), Supelco®, Analytical standard

Supplier: Merck

GPC Standard, Poly(vinyl chloride), average Mw 85000 (Typical), average Mn 40000 (Typical), Supelco®, Analytical standard

Supplier: Merck

Poly(methyl methacrylate) is a rigid and transparent type of polymer material. It is obtained via polymerization of methyl methacrylate monomer.

Supplier: Merck

Set contains 12 different polyethyleneglycol standards with Mp ~106, ~330, ~420, ~600, ~1500, ~2010, ~3120, ~6240, ~8600, ~12000, ~23000, ~40000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations

Supplier: Merck

GPC Standard, Mw 2000000 (typical), Supelco®

Supplier: Merck

GPC Standard, ∼2010 Mw, Mw/Mn ~1,12, Supelco®

Supplier: Merck

GPC Standard, Poly(butyl acrylate) solution, Mw 60000 (Typical), average Mn 20000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard

Supplier: Merck

Nonpolar Column Test Mix, TraceCERT®, Supelco®, 500 mug/mL in dichloromethane, Certified reference material, Pk Info: ampule of 2 mL

Supplier: Merck

Poly(acrylic acid sodium salt) is a hydrophilic polymer, which can find wide applications in the production of consumer product like diapers, because of its ability to absorb many more times its mass in water.

Supplier: Merck

Set contains 12 different polystyrene standards with Mp ~266, Mp ~374, Mp~1100, Mp~1920, Mp~2950, Mp ~4870, Mp ~7200, Mp~10400, Mp ~15700, Mp ~19600, Mp ~34800, Mp ~67500; always 4 standards are lyophilised in a 1,5ml vial (yellow, blue or black); for 1 complete calibration use one of each of the yellow, blue and black vials; 1 set contains 30 vials for 10 complete calibrations.

Supplier: VWR Chemicals

A secondary GC solvent reference standard for various chromatographic and analytical applications.

Supplier: VWR Chemicals

A secondary GC solvent reference standard for various chromatographic and analytical applications.