You searched for: Environmental Test Kits

Supplier: Lovibond

The speed test is based on reverse titration. After adding a reagent tablet to a calibrated test tube, the water sample is added slowly until the colour of the solution changes (e.g. from red to blue). The user can then obtain the result from the liquid level.

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: Hach

Test kit, EDTA standard solution, 0,0200 N, 1 l, for hardness determination by buret titration

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: Lovibond

Test kit, Ortho phosphate VM tube test, Range: 3 – 60 mg/l, For unit: Spectrodirect

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of iron concentrations as low as 0.05 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity by a factor of nearly 10. Ideal for rapid and easy analysis of iron directly on-site. No maintenance or calibration is required.

Supplier: Hach

Used for sulphide determination by the methylene blue method.

Supplier: Hach

The most accurate visual test kit method for simple and economical measurement of pH with fast and accurate comparisons.

Supplier: Hach

Simple, economical rapid colour disc method with an easy to carry test kit.

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Hach

Ready for use, photometric evaluation system and environmentally friendly.

Supplier: Hach

This kit provides measurement of ortho- (reactive) and meta- (condensed) phosphate (requires hot acid digestion).

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

Cuvette tests for water testing applications.

Supplier: Hach

For Iodine values >0,2.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of zinc in water samples.

Supplier: Lovibond

Highly sensitive and precise COD testing of water with minimum effort.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of peroxide in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chlorine in water samples.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Lovibond

Test kit, Copper No1/No2 tablet set (100 of each), Range: 0,3 – 5 mg/l Cu , For unit: MD100, MD200, MD600, MD610,

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

Test kit, Molybdenum HR, Range: 0,3 - 40 mg/l, For unit: DR 6000, DR 5000, DR 3900 DR 3800, DR 2800, DR 2700, DR 1900

Supplier: Hach

For total hardness determination by EDTA digital titrator titration with calmagite indicator.

Supplier: Hach

Simple to handle test strips give an overview of the water quality in just a few seconds. In the laboratory the strips can be used as an initial screening to indicate measuring range or potential problems.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

Pre-dosed reagents for maximum safety.

Supplier: MACHEREY-NAGEL

Reagents for the determination of nitrite in water samples.