You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Tubing connectors, straight, HDPE
Supplier: SEMADENI
Tubing connector, made of HDPE, with taper ends.
Expand 1 Items
Tubing connectors, T-shaped, POM
Supplier: SEMADENI
Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.
Expand 1 Items
Nuts and ferrules
Supplier: VICI JOUR RESEARCH
Ferrule, CTFE, collapsible, for 1/8" O.Ø tubing
Expand 7 Items
Aspiration station Y-shaped tubing connector
Supplier: GILSON
The Gilson safe aspiration station Y-shaped tubing connector is for use with the Gilson safe aspiration station.
Expand 1 Items
Connectors for capillary tubing, high pressure unions, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Stainless steel and PEEK polymer.
Expand 18 Items
Tubing connectors, Y-shaped, PP
Supplier: SEMADENI
Connectors, Y- shaped, made of PP, natural color.
Expand 1 Items
T-pieces
Supplier: EDWARDS HIGH VACUUM METTLER
T-pieces made of aluminium or stainless steel.
Expand 7 Items
Unions
Supplier: VICI JOUR RESEARCH
Unions for easy connection of low pressure solvent lines.
Expand 7 Items
Tubing connectors, SVS, bent
Supplier: witeg Labortechnik
Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.
Expand 1 Items
Elbows, stainless steel
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 40 mm, Stainless steel
Expand 3 Items
Biocompatible mixing tee
Supplier: VICI JOUR RESEARCH
PEEK with titanium filter element.
Expand 1 Items
Tubing connectors, X-shaped, PP
Supplier: SEMADENI
Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.
Expand 1 Items
Screw couplings for threaded tubes
Supplier: Lenz Laborglas GmbH & CO.KG
Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.
Expand 4 Items
Two-piece fingertight fittings
Supplier: VICI JOUR RESEARCH
PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.
Expand 2 Items
Nuts and ferrules, Super Flangeless™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® Super Flangeless™, P-258B, ferrule, ETFE, blue, ETFE
Expand 30 Items
Elbows, aluminum
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 16 mm, Aluminium
Expand 2 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of stainless steel.
Expand 3 Items
End plug
Supplier: VICI JOUR RESEARCH
Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".
Expand 1 Items
Connectors
Supplier: SEMADENI
Connectors for easy installation on any plastic containers by means of counter screw.
Expand 3 Items
Plugs and caps, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, P-116, plug for micro fittings, PEEK, Black
Expand 28 Items
Conical tubing adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PEEK.
Expand 2 Items
Connector kits for EASY-Column™ capillary HPLC columns
Supplier: Thermo Fisher Scientific
Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.