You searched for: Deionisers
Deionizers remove mineral ions, such as sodium, calcium, iron, copper, chloride, and sulfate, from water, making it highly pure and useful for most laboratory and general manufacturing applications. These units are economical, stand-alone systems that can be customized to meet specific application needs, providing low to medium volumes of deionized water. Built-in meters in most models allow for easy and convenient monitoring of water quality and timed dispensation.
Water treatment units, Aqua purificator PG 8595
Supplier: MIELE
Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.
Expand 2 Items
Water treatment system, Pure Aqua Service
Supplier: Binder
This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.
Expand 1 Items
Resin Column Water Purifiers
Supplier: SMEG
The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.
Expand 1 Items
Deionizer, B-Pure™
Supplier: Thermo Fisher Scientific
These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.
Expand 2 Items
Deioniser, mixed-bed, Aquademat
Supplier: GLASWARENFABRIK KARL HECHT
Ion exchanger for purified water.
Expand 1 Items
Deionizer, barnstead Bantam™
Supplier: Thermo Fisher Scientific
It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.
Expand 1 Items
Deionisers, behropur®
Supplier: BEHR
These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.
Expand 2 Items
WaterPro® PS HPLC/UF Hybrid Polishing Station
Supplier: LABCONCO
WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.
Expand 1 Items
Deionizers with stainless steel canisters, behropur®
Supplier: BEHR
The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.
Expand 1 Items
Deionizers with nylon resin canisters, behropur®
Supplier: BEHR
Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.