You searched for: Pumps

Supplier: Lenz Laborglas GmbH & CO.KG

Water jet pumps made of borosilicate glass with or without non-return valve.

Supplier: MURRAY S

Dispensing pump is suitable for lotions, creams and gels.

Supplier: asecos

Solvent pump for filling of high purity liquids, removal of organic solvents and flavourings.

Supplier: GILSON

Add channels to your MINIPULS® 3 or Evolution and allow even greater flexibility in your laboratory.

Supplier: Sartorius

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

Supplier: SciLabware

Water jet pump suitable for most laboratory water pressures with integrated non-return valve that increases safety and a detachable vacuum connection for 6 to 9 mm bore tubing.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. PP, with PTFE seals.

Supplier: NRG DEVELOPMENTS

These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. Nylon, with PTFE seals.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: B. Braun

The volumetric infusion pump Infusomat® Space is one of the basic building blocks of the Space system, designed for acute care adult and pediatric facilities.

Supplier: asecos

This drum pump is used for filling high purity liquids. PTFE with stop cock.

Supplier: DWK Life Sciences

Made of polypropylene.

Supplier: asecos

Stainless steel drum pump with PTFE seals. Drum pump with outlet hose 1,2 m and discharge arc. for flammable liquids electrically conductive. Can be used in Zone 0 and 1. Explosion group II A.

Supplier: DWK Life Sciences

DURAN®, borosilicate glass 3.3, clear.

Supplier: Thermo Scientific

Vacucenter™ is a vacuum pump cabinet fully equipped with a central power supply, a single main switch for both vacuum oven and pump including a timer for tracking oil changes for the rotary vane pump. The vacuum oven can be placed on top of the cabinet.

Supplier: EDWARDS HIGH VACUUM METTLER

These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Supplier: EDWARDS HIGH VACUUM METTLER

The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Supplier: EDWARDS HIGH VACUUM METTLER

Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: CORNELSEN EXPERIMENTA

Piston air pump on a stable plastic base with rubber feet, non-return valve with a bleed screw, pump plate and vaccumm connection to the centre of the plate.

Supplier: Avantor Fluid Handling

Make the most of your Masterflex drives replacement parts and other accessories.

Supplier: Avantor Fluid Handling

Totally enclosed motors are ideal for dusty, dirty, or damp environments.

Supplier: Avantor Fluid Handling

Operate a 230-240 VAC motor with only a 115 VAC power supply.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Four-vane rotary design is almost maintenance free.

Supplier: Avantor Fluid Handling

Create your own motor mounting with the hardware below.

Supplier: Avantor Fluid Handling

For Class 1 Group C and D, Class 2 Group F and G locations.

Supplier: Avantor Fluid Handling

Use with three-phase motors to create a variable-speed system.

Supplier: Avantor Fluid Handling

Optimize performance of your Liquid-Solids Separator.