Supplier: PerkinElmer

Sampling probe, 0,6 mm Ø int., For: AS-90/90A/90 Plus/91/93 Plus autosamplers

Supplier: PerkinElmer

This is a replacement vial locator for PerkinElmer AutoSystem GC autosamplers.

Supplier: PerkinElmer

Liners protect GC columns against column contamination. These glass split and splitless inlet liners promote full vaporisation of samples, minimise mass discrimination, and achieve accurate and reproducible results.

Supplier: PerkinElmer

Deactivated fused silica transfer capillary, 2,5 m length, 0,32 mm wide

Supplier: PerkinElmer

These desorber tubes are offered with a variety of sorbent packing materials for many GC applications including indoor and outdoor air monitoring, analysis of flavors and fragrances and the analysis of outgassing from packaging, polymers, pharmaceuticals and semi conductor material.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Supplier: Cytiva

Sleeve for injection valve, INV-907, PTFE

Supplier: VELP SCIENTIFIC

The PM full is designed to keep your running with high performances while ensuring long life and reliability, even under high workloads.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Equivalent to the corresponding OEM part.

Supplier: Cytiva

ÄKTA extension equipment holder for extra valves to be used on, for example, ÄKTApurifier.

Supplier: Cytiva

Each sample loop consists of tubing 1,8 mm OD and two tubing connectors (M6).

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Equivalent to the corresponding OEM part.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Equivalent to the corresponding OEM part.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Supplier: SCIENCIX

Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: AGILENT HEWLETT PACKARD

Insulator, NPD upper

Supplier: UPCHURCH SCIENTIFIC

These high quality stainless steel sample loops have burr-free, square-cut ends to ensure a flush connection to valve ports.

Supplier: PEAK SCIENTIFIC

Annual service kit for Genius NM32LA, 1022, 1023

Supplier: VICI JOUR RESEARCH

These stainless steel 316 sample loops are cut using an electrolytic cutting process followed by ultrasonic and high pressure steam cleaning to remove contaminants, dried and capped with softener free caps to avoid the recontamination of the tubing.

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: DOMNICK HUNTER

Maintenance kit 8000 hours for LC-MS 15-1, 20-1, 30-1

Supplier: AGILENT HEWLETT PACKARD

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Thermo Fisher Scientific

Sample loop, for 9010, 9725 and 9725i injectors, PEEK, 20 µl, For tube I-Ø: 0,25 mm

Supplier: VICI JOUR RESEARCH

These PEEK sample loops contain no metals or other extractable compounds. Therefore, no foreign materials will be introduced into the system. Softener free PE caps are used to avoid the contamination of the tubing. Particularly suited for separations involving proteins, peptides, nucleic acids or other samples of biological origin as well as in IC systems where metal traces may interact with ionic samples or release transition metals that may deactivate ion exchange columns.

Supplier: OMNIFIT

Universal replacement parts for all Omnifit® labware columns which gives complete flexibility to replace lost or worn parts. Compatible with BenchMark, SolventPlus and HiT column ranges.

Supplier: VICI JOUR RESEARCH

These sample loops are made from PEEK tubing and fittings. Mechanically strong, chemically inert polymer ideal for HPLC applications. Softener-free polyethylene caps are used to avoid contamination of the tubing.