You searched for: Physics Educational Materials

Supplier: MOLLER THERM

Milk glass scale on polished wooden board. Colored liquid filling. Measuring range -10 to +100 ° C, 0 to +80 ° R, +20 to +212 ° F.

Supplier: PHYWE

Coil springs made of spring steel. With stirrups at both ends. Suitable for Hook's team and swing attempts.

Supplier: CORNELSEN EXPERIMENTA

Circular gutter made of aluminum sheet with insulating handle. Fits U-core 765-1077 and was used, among other things, when demonstrating the principle of induction furnaces.

Supplier: CORNELSEN EXPERIMENTA

Metal frame with tension spring and membrane of Papyrolin. With the help of two tambourines and a pendulum ball, experiments with pressure waves can be performed.

Supplier: PHYWE

Describes 70 different experiments, on 288 pages, that can be performed in the areas.

Supplier: GR NNA PLASTEMBALLAGE AB

Thin rubber membrane for membranes for pressure boxes and the like. Can be cut to the desired size.

Supplier: CORNELSEN EXPERIMENTA

Used in electrostatic experiments. Equipped with holes, 4 mm, at one end for connection of conductor ball or capacitor plate.

Supplier: CORNELSEN EXPERIMENTA

Bare wire in a roll, on a plastic former.

Supplier: GR NNA PLASTEMBALLAGE AB

Trolley, 100 g, of lacquered sheet metal with nylon wheels. Equipped with hook and hole for mounting weights.

Supplier: GR NNA PLASTEMBALLAGE AB

Elderberry globules are used in influenza experiments, to detect charge. Fp about 10 pcs.

Supplier: CORNELSEN EXPERIMENTA

Aluminum ring with suspension in three points. Used together with a dynamometer to determine the surface tension in liquids.

Supplier: PHYWE

Divers of glass, placed in a bottle filled with water. If the liquid pressure increases, water flows into the diver, whose average density increases. This results in the diver sinking to rise again towards the surface when the pressure is reduced.

Supplier: CORNELSEN EXPERIMENTA

Intended for use on overhead projectors for demonstration of function and principle for different types of motors. Made of strong, transparent plastic. Equipped with suction feet.

Supplier: CORNELSEN EXPERIMENTA

Plastic rod with metal tube equipped with an axial and a radial 4 mm connection.

Supplier: CORNELSEN EXPERIMENTA

Skarvklämma med skruv. För tråd och plåt med max 1 mm tjocklek.

Supplier: PHYWE

For electrostatic experiments, for example, determination of the charge of a sphere and induction experiments. Hollow surface-treated brass sphere equipped with 4 mm holes for connecting banana connectors.

Supplier: CORNELSEN EXPERIMENTA

Used to show how metal wire resistance depends on length, cross-sectional area and material. Made of plastic and equipped with 6 tensioned wires connected with 4 mm banana plugs.

Supplier: CORNELSEN EXPERIMENTA

The kit contains components for basic laboratory work with solar cells. The components are simply designed and the students quickly build their experimental setups. With the rate, e.g. the following are studied.

Supplier: CORNELSEN EXPERIMENTA

For experiments with absorption of heat radiation. Consists of a black and a white E-flask and two thermometers (0 to 50 °C).

Supplier: GR NNA PLASTEMBALLAGE AB

Straight, stainless steel wire, mounted with a rubber stopper in soda glass tubes. Used for collecting gases during electrolysis. Suitable holder 765-0440. Electrode.

Supplier: PHYWE

Phywe's transparent Stirling engine clearly shows the engine's components and operation. For the demonstration of the function of.

Supplier: 3B Scientific

Evacuated glass flask containing i.a. electron gun with directly heated tungsten wire cathode and a cylindrical, collimating anode. The generated beam is allowed to stroke along a semi-transparent mica disc in the center of the tube. Luminescent coating on the front of the disc makes the beam appear. Two of the edges of the back are provided with graduated scales.

Supplier: PHYWE

Used in studies of the power action of a current-carrying conductor in a magnetic field. The field can e.g. obtained from U-magnet 765-0444. With two bands, the force action between these at different current directions can be investigated. Each band is provided at both ends with a 4 mm banana plug.

Supplier: GR NNA PLASTEMBALLAGE AB

Very light ball of porous plastic. With thin nylon thread for hanging. Used for influence tests, for transferring charge, eg between capacitor plates etc.

Supplier: 3B Scientific

Spoked wheel with weighted rim for demonstrating conservation of angular momentum. Simple to use due to small wheel radius and ease of suspension. Teachers and students can feel the conservation of angular momentum as they hold the spinning wheel while sitting in a rotating chair or standing on a rotating platform. You can also create the effect of precession by spinning the bicycle wheel and hanging it from a string.

Supplier: CORNELSEN EXPERIMENTA

Shows that the bottom pressure in a liquid depends only on the height and not the shape of the container. The fluid pressure is transferred via a rubber diaphragm to an adjustable hand. Comes with four containers of different shapes. Dimensions.

Supplier: CORNELSEN EXPERIMENTA

The kit contains about 15 different components with which a number of experiments can be performed. The components are designed so that students can quickly and easily perform their laboratory work. The kit can show how the following forms of energy are generated:

Supplier: PHYWE

Practical device for demonstration and determination of the force that keeps a body in balance on an inclined plane.

Supplier: PHYWE

Equipment for demonstrating photoelectric power and determining Planck's constant. A photocell is equipped with filters that only transmit light of a certain wavelength. The photocell is illuminated with light from a Hg lamp. The potassium cathode then emits electrons that pass over to the unlit anode. Over time, a voltage arises that prevents new electrons from reaching the anode. The resulting voltage is measured with a measuring amplifier and a voltmeter. The measurement is repeated with filters for different wavelengths. Photocell and Hg lamp are equipped with magnets at the bottom for stable installation on the mounting plate. List of equipment.

Supplier: PHYWE

Same as 765-1149 but without painting. 50 components incl. Manual.