6908 Results for: "Ultrasonic+Cell+Disruptors&pageNo=27"

Supplier: ALSICO

Comfortable multirisk trousers in inherent flame retardant fabric.

Supplier: THERMO MATRIX TECHNOLOGIES

Permanently attached, laser-etched 2D barcodes on the bottom of each tube allow you to scan and decode tubes at once without removing them from the rack and allow data to be associated with each tube.

Supplier: RENTEX

Bib and braces, Overall, bib and brace, Bib and braces, TrenkaTex®, Canvas 310, 42 (men), Polyester/cotton, Grey, For men, 65% polyester and 35% cotton, Weight: 310 g/m², HiVis, General Purpose, Industrial, Pockets: With pockets, Closure type: Zip closure

Supplier: RENTEX

Trousers made of 60% cotton and 40% polyester. with 3M Scotchlite™ reflective materials.

Supplier: TRENKA

This exclusive fine piqué polo shirt is made from 100% ring-spun combed cotton. The gray model is made from 90% preshrunk ring-spun combed cotton and 10% viscose.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: FRISTADS KANSAS

Functional, two-tone winter jacket made from Beaver nylon (50% nylon, 50% cotton), a hard-wearing and tear-proof material that is resistant to dirt, oil and water. With faux fur on the collar and on the body, quilted lining in the sleeves and contrasting seams.

Supplier: DuPont

These Tyvek® overalls are made from flash spun, high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size).

Supplier: Brady

Mark cables and wires with the B-427 self-laminating vinyl label material, designed with a clear self-laminating protective layer. Print almost anywhere with a durable Brady portable label printer.

Supplier: FRISTADS KANSAS

These overalls with elasticated braces are made of different fabrics. The water-repellent fluorescent material in manufactured from 80% polyester and 20% cotton. The other parts are made of 65% polyester and 35% cotton which is slightly brushed on reverse. Reinforcements are made of 100% polyamide.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suited to workshops, and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed, ensuring a pleasantly comfortable cotton feel. The outside can withstand the roughest demands and will not fade, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: Avantor

Avantor® ACE® Method Development Kits (MDK) are designed to maximise selectivity, offering a powerful and reliable approach to UHPLC/HPLC method development. Based upon an ultra-inert, high efficiency silica, Avantor® ACE® phases incorporate the latest developments in LC stationary phase design, providing chromatographers with more choices for alternative selectivity, without compromising stability or robustness.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: FRISTADS KANSAS

Industrial overall made of 65% polyester and 35% cotton, with soft nap on reverse side. The black overall is available with several different accent colours. The accent colour can be found on the top of the collar, on the inside front flap, on the pocket edges and and as a stripe on front and back.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: HAMILTON ROBOTICS

Hamilton CO-RE tips were designed for MICROLAB pipetting workstations in order to solve the problem of sealing and alignment plagued by press-fit tip attachment techniques. Each CO-RE disposable tip has a circular groove inside the attachment orifice. An o-ring on the pipetting channel is expanded to fit this groove precisely providing an air-tight seal and straight alignment between tip and pipetting channel.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: Thermo Fisher Scientific

These Nunc™ cell culture flasks are designed for culture consistency, cell health, and reproducibility. Choose from a variety of surfaces and sizes with culture areas ranging from 25 to 500 cm² to suit your specific applications and cell types.

Supplier: RENTEX

Bib and braces, Overall, bib and brace, Bib and braces, TrenkaTex®, Trenkatex® Color-Tech, 34 (men), Polyester/cotton, Red, For men, 100% Baumwolle, Weight: 245 g/m², General Purpose, Industrial, Pockets: With pockets, Closure type: Press studs / snaps

Supplier: SARSTEDT

This blood collection system enables hygienic and easy handling in an enclosed system.

Supplier: Avantor Fluid Handling

ULTRA PLT SIL 5/16X11/16 100FT 1 * 1 items

Supplier: Cole Parmer

ANTI-VIBRATION MOUNTS STR8 1 * 1 items

Supplier: Thermo Fisher Scientific

Use Thermo Scientific™ SureSTART™ 9 mm screw caps with screw vials that have a 9 mm opening, including SureSTART 2 ml glass screw vials, 2 ml gold-grade glass screw vials, total recovery glass screw microvials for <2 ml samples, 1,7 ml high recovery glass screw vials, and glass screw microvials for <2 ml samples (Level 3). Select Level 3 products for ultimate performance and sensitivity from methods, while maintaining the highest levels of sample security and integrity.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: RENTEX

Flame retardant trousers made of 54% modacrylic FR, 44% cotton and 2% guides. The material is permanently flame retardant, anti-static and impregnated to be water and oil repellent. Skin-friendly due to high cotton content.

Supplier: Thermo Fisher Scientific

Hypercarb porous graphitic carbon (PGC, Hypercarb) is a unique stationary phase composed of flat sheets of hexagonally arranged carbon atoms with a satisfied valence, as in a very large polynuclear aromatic molecule, it provides extended separation capabilities, enhanced retention of polar compounds and separtion of structurally related analytes with stability at extreme pH and high temperature.

Supplier: VWR Collection

Rugged and economical balances, that are ideal for educational establishments and laboratory use. A series that ranges from simple weighing to operation with automated internal calibration. All Classic models have a simple backlit LCD with adjustable contrast and ergonomic keypad and a stainless steel top pan.