3467 Results for: "US+Biological&pageNo=49"

Supplier: Bohlender

Screw cap and clamping ring made from PPS, sealing ring and tapered ring (ferrule) made from PTFE.

Supplier: Merck

MF-Millipore™ filters without Triton® surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore™ filters.

Supplier: DUPERTHAL

These safety cabinets are fire resistant up to 90 minutes. These under bench cabinets are equipped with wing doors and/or drawers for the storage of hazardous substances in working spaces.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Useful for normal phase separations. Replaces Hypersil® BDS and Pinnacle® Amine.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: Restek

These Ultra biphenyl columns are made of high-purity, type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications.

Supplier: Restek

Highly selective phase for polar analytes. Compatible with highly aqueous (up to 100%) mobile phases. Silica manufactured by Restek.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 PolarTec is an octadecyl modified silica phase with embedded polar group for HPLC.

Supplier: GA

DYMO compatible direct thermal cryo labels with permanent adhesive.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: VWR Chemicals

For various microbiological applications.

Supplier: Avantor

Avantor® Alltima HPLC columns are high quality phases designed for general purpose applications.

Supplier: Avantor

BAKERBOND® Q2100 LC phases have been specially designed to solve the challenges of most routine samples. They can also be a good starting point for new method development projects. With options of four widely used chemistries and three particle sizes BAKERBOND® Q2100 can be a useful addition to your analytical toolkit.

Supplier: Avantor

Ready-to-use pH buffers are manufactured in large lots to stringent specifications and utilise quality control procedures to reduce lot-to-lot variability. You can eliminate the time and expense of preparation and standardisation of solutions, helping streamline high-volume analytical work in applications such as quality control.

Supplier: Thermo Fisher Scientific

The BetaBasic™ HPLC columns with its pH stability and with a pore size of 150 Å are ideal for small molecules, peptides and protein digests and are suitable for LC/MS applications.

Supplier: Agilent

These columns are recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. They are specifically designed for the analysis of volatile priority pollutants and residual solvents.

Supplier: Hycultec

Glass vials, with screw cap. These vials are suitable for −20 °C deepfreezing. Screw caps with silicone stoppers make sure that the reagents are stored tight and secure.

Supplier: Restek

These analytical HPLC columns with spherical shaped traditional monomeric cyanopropylsilane are well suitable for the analysis of protonated bases and also useful for confirmation of analysis on a C18 or C8 columns.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: Avantor

Very popular nitroterephthalic-acid-modified polyethylene glycol (PEG) column of high polarity for the analysis of free fatty acids, phenols, alcohols, glycols.

Supplier: VWR Chemicals

A range of culture media in compliance with ISO standards and the International Harmonised Pharmacopoeia. All our media are, as you would expect, produced using high quality raw materials and are subject to strict quality controls, in a production environment following Good Manufacturing Practice guidelines. Raw materials are selected in compliance with the required standards. Dehydrated culture media should be stored at 10 to 30 °C unless otherwise stated, in their closed containers in a dry environment. Standard pack size is 500 g.

Supplier: VWR Chemicals

Ready to use culture media for microbiological test requirements in the food industry, water, environmental control and in the pharmaceutical industry. The range is manufactured from high quality raw materials. All the culture media are manufactured using selected dehydrated bases, and comply with various standards. All media are produced using the latest technology and are subject to strict quality controls carried out by qualified microbiologists.

Supplier: Avantor

Application specifc columns for volatile organic compounds (VOCs), solvents and purgeable compounds. Due to the high max. temperature, they are ideal for two-parallel columns confg. in the same oven. A good alternative to the HI-624 giving different selectivity. It is a more robust than the HI-624 and can operate at higher temperatures.

Supplier: Lovibond

A wide range of test discs containing a series of graded glass filters, which have been pre-calibrated to give direct test readings. The unique feature of Lovibond® test discs is that they incorporate coloured glass filters which are colour stable and not affected by UV light or extreme environmental conditions.

Supplier: G-Biosciences

Ready-to-screen, human, single tissue blots, from both normal and tumour tissues. G-Biosciences pre-made blots are prepared with the appropriate GenLysate™ and 50 μg protein is loaded onto a 4 to 20% denaturing polyacrylamide gel, along with a prestained molecular weight marker. After the proteins are resolved, they are transferred to a PVDF membrane, using our Western transfer buffer.

Supplier: Restek

SV internal standard mix, includes acenaphthene-d10, naphthalene-d8, chrysene-d12, perylene-d12, 14-dichlorobenzene-d4, phenanthrene-d10, with 4000 µg/ml each in methylene chloride, 1 ml/ampule, : N/A

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.