15490 Results for: "Sampler+Racks&pageNo=40&view=easy"

Supplier: Corning

An easy, ready-to-use way to consistently obtain a more uniform single-cell suspension. Made of a strong nylon mesh and available with 40, 70 or 100 µm pores that are evenly spaced for optimal performance in a variety of applications. A faster and easier alternative to gauze filtration in procedures involving dissociation of cells from either clumps or primary tissue.

Supplier: VWR Collection

Block heater block, VWR®, Aluminium block, For: 1,5 ml tubes, No. of holes: 40

Supplier: Merck

Filter cartridge, Milli-Q®, Cartridge RO Pretreatment 1, final filter, Millipak-40

Supplier: S.C.A.T.

SCAT canisters made of high-quality electrically conductive PE-HD-el material to prevent flying sparks caused by electrical discharge when disposing of flammable or explosive laboratory liquids.

Supplier: Agilent

Agilent supplies are equivalent to PerkinElmer ICP-OES supplies for complete confidence.

Supplier: VWR Collection

screw cap, For: Wide neck bottles, Thread: 40 mm, For bottles: 250 ml

Supplier: Thermo Fisher Scientific

Stainless steel (Fe:Cr:Ni; 70:19:11 wt%), gauze woven from wire 40 mesh woven from 0.25mm (0.01in) Type 304

Supplier: Abnova

Mouse monoclonal antibody raised against human ITGAL.

Supplier: VWR Collection

ChromasterUltra Rs, ChromasterUltra Rs sample loop kit (40 µl) for 6270 autosampler

Supplier: Sartorius

LentiSELECT kits offer LentiSELECT 40, LentiSELECT 500 and LentiSELECT 1000 for the purification and concentration of VSV-G pseudotyped lentivirus from 40 to 1000 ml cell culture, leading to purified infective particles. These lentivirus purification and concentration kits offer purified recombinant lentivirus particles for in-vitro transfection a fast, safe and easy to use solution. These kits replace time-consuming ultracentrifugation protocols, which typically take about one day for large sample volumes, thus reducing the purification time to only a few hours.

Supplier: MAPSA

Pergamyne paper, white, 40 g/m².

Supplier: SenseAnywhere

An AssetTag is a card with barcode for the holder and QR code for on the outside of an asset representing the monitored asset in SAClient.

Supplier: Bohlender

Bellow connectors, made of PTFE, with sharp folds and sealing rings on the outside of the cone.

Supplier: DISCOVER ECHO

Plan achromat N.A. 0,65, 40×, Working distance: 0,8 mm, For: Rebel

Supplier: Thermo Fisher Scientific

These crucibles are manufactured from aluminium oxide. They display superior characteristics both at elevated temperature and at high frequencies, and are resistant to corrosive liquids and gases. Oxide ceramics are also inert to oxidation and are not subject to radiation damage.

Supplier: Thermo Fisher Scientific

Gold supplied in 0.1 mg/ml sodium citrate with stabilizer stabilised, nanoparticles 40 nm OD1 (Abs. 530 nm)

Supplier: Avantor Fluid Handling

Easily meansure flow of your Feed Verification Diaphragm Pump.

Supplier: Bohlender

All adaptors of this type are supplied with a male thread, a female thread and recessed grips.

Supplier: TOSOH Bioscience

Toyopearl resins can be used in organic solvents or mixtures of organic solvents and water. The compatibility of DMF with Toyopearl also permits the separation of hydrophobic substances such as polystyrenes.

Supplier: UVP ULTRA VIOLET PRODUCTS

UV lamp, UV bench lamp without tubes, XX-40, 40 W, -, W×D×H: 1260×152×108 mm, Weight: 9,0 kg

Supplier: Abcam

Mouse polyclonal to Cyclophilin 40.

Supplier: GLASWARENFABRIK KARL HECHT

Stopper, DURAN®, hollow, 45/40, Clear glass

Supplier: EBRO

Ultra-accurate probe, −40…+1100 °C, Ø×L: 2×1000 mm

Supplier: JULES RICHARD INSTRUMENTS

Chart for recorder, For ambient recorders, –10…+40 °C, Days (7)

Supplier: Thermo Fisher Scientific

Acetate, 1M buffer solution, pH 4,0, Liquid

Supplier: VARIAN

Tubes, Versaplate CN-U, 40 um, 100 mg

Supplier: Thermo Fisher Scientific

Accucore™, Uniguard™ drop-in holder for 4,0 − 4,6 mm I-Ø

Supplier: VWR Collection

VWR® bottle top dispenser adapter, size 40 mm, VWR®

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 40 mm, Stainless steel

Supplier: MACHEREY-NAGEL

Metal spring for 6×40 mm conical inserts, Metal