6601 Results for: "S-Trityl-D-cysteine&pageNo=43"

Supplier: EPPENDORF

The Eppendorf® ThermoStat C allows you to heat or cool almost all common vessel and plate formats. Fast heating and cooling saves time. Condensation of small volumes can be prevented by using the Eppendorf® ThermoTop (optional), a heated lid with condensation-protect technology.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Save time and standardise activities in equipment preparation for steam sterilisation; or use in any pharmaceutical manufacturing setting to keep cleaned equipment protected from contamination.

Supplier: Brady

The B-494 polyester label is a reliable sample identification and traceability solution.

Supplier: Trajan Scientific and Medical

The SGE BP1 GC Capillary Column provides a great non-polar option for GC analyses. Recommended for: Hydrocarbons, aromatics, pesticides, phenol, herbicides, amines.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: Restek

These Ultra Aromax is a unique reversed-phase material that exhibits extreme retention and selectivity for aromatic and/or unsaturated compounds. They are made of high-purity, type-B silica that minimises activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: ERGOMAT

The Ergomat Softline is made from nitrile rubber and is designed to increase comfort while reducing tripping hazards, body aches, quality issues, and sick leaves. It is designed for areas where resistance to oil, petrochemicals and heat is important. Ideal for wet environments, in case of excessive volumes of fluids, the Softline can be die-cut to allow for drainage.

Supplier: TEKNOMEK

Fully welded stainless steel tables are a very versatile work surface, intelligently designed to remove potential trap points. Features include diamond braces - at 300 mm from the ground they aid ease of cleaning. Choose between diamond centre tie or rear tie bar or undershelf to suit your needs.

Supplier: TOSOH Bioscience

SkillPak™ BIO pre-packed columns are designed for a fast method development and scale-up of multi-column chromatography (MCC) or continuous chromatography processes. They are pre-packed with TOYOPEARL® process chromatography media for bioseparations.

Supplier: Restek

These MXT-5 columns are Siltek-treated stainless steel with low-polarity phase, crossbond diphenyl dimethyl polysiloxane stationary phase. All residual catalysts and low molecular weight fragments are removed from the MXT-5 polymer, providing a tight monomodal distribution and extremely low bleed.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C18 bonding. Hydrophobic C18 phase suitable for analyses of a wide range of compounds, from acidic through slightly basic. Replaces Hypersil® BDS C18 and Pinnacle® ODS Amine.

Supplier: MICROSOLV

Cogent Amide™ has an amide functional group bonded to the silica-hydride surface direct silicon-carbon bonds. Since the ligand is attached to the surface with direct silicon carbon bonds the bonded phase does not hydrolyze in acidic conditions. Also, it does not make a strong association with acetone.

Supplier: Avantor

Very popular PEG high polarity MS phase for a wide range of applications, including (for example): essential oils, flavours and fragrances also alkanols. HI-WAX MS is an MS grade low bleeding cross-bonded column.

Supplier: Avantor

Really versatile general purpose low-polarity phase for a wide range of applications, including (for example): PCBs, essential oils, pesticides, semivolatiles and many more. HI-5 is a crossbonded phase and assure a long lifetime even under high temperature limits.

Supplier: Avantor

Vydac MS columns are a later development from Grace for the reversed phase HPLC separation of biomolecules.

Supplier: Restek

These columns are based on a wide pore material designed for optimal large-molecule separations. Base-deactivated, wide-pore packing exhibits excellent peak shape for a wide range of compounds. Less retention in reversed phase assays than Viva C18 or Viva C8.

Supplier: Restek

These biphenyl coulmns have a greater degree of dispersion than conventional phenyls and a greater degree of polarisability than phenyl hexyls, creating higher selectivity and a greater range of usability. With heightened interactions shows substantial increases in retention for dipolar, unsaturated, or conjugated solutes and enhanced orthogonal selectivity when using methanol mobile phases.

Supplier: Restek

These Viva columns are based on a wide pore material designed for optimal large-molecule separations. Base-deactivated spherical silica is useful for normal-phase or HILIC separations. These columns have a narrow distribution around the mean pore size, permitting a larger portion of the silica surface to play a role in the separation.

Supplier: Restek

Viva C8 columns are conventional monomeric octylsilane columns offering a shorter alkyl chain to provide less hydrophobic retention and improved basic peak shape over a traditional C18 phase. These general-purpose C8 columns are suitable for a wide range of compounds from acidic through slightly basic.

Supplier: Portwest

Cut resistance combined with superb grip in oily conditions. ³/₄ nitrile foam dipping absorbs oil keeping hands clean and dry to ensure secure handling.

Supplier: Restek

Ultra C8 is a conventional monomeric octylsilane column offering a shorter alkyl chain to provide less hydrophobic retention and improved basic peak shape. It is made of high-purity, type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Cyano bonding. Suitable for analyses of a wide range of compounds, from acidic through slightly basic. Also useful for confirmation of analyses on a C18 or C8 column. Can be used in normal phase or reversed phase mode of separation.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C8 bonding. Similar to Pinnacle® DB C18, but the shorter alkyl chain provides less hydrophobic retention. Less retention can be useful for shortening analysis time, if resolution is adequate. Replaces Hypersil® BDS C8 and Pinnacle® C8 Amine.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Pyramid is an octadecyl modified silica phase with polar endcapping, especially designed for use in eluent systems of up to 100% water.

Supplier: Thermo Fisher Scientific

These ODS columns are suitable for non-polar and moderately polar analytes including acids, neutrals and lipophilic compounds. All column phases are endcapped.

Supplier: Portwest

This cut C glove has an added layer of protection, using an innovative TPV back protection. The nitrile micro foam palm gives superior grip and protection against liquids and water penetration.

Supplier: Avantor

Avantor® ACE® Silica columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Tyvek® 1073B bags are ideal for steam sterilisation of pharmaceutical components such as vial and syringe stoppers and caps as well as heavy equipment parts with sharp edges.

Supplier: Brady

Durable, low-shrink vinyl with our most aggressive adhesive. Conforms to irregular, curved, rough and highly textured surfaces (painted cinder blocks, uneven wood, textured plastics, paper-jacketed pipes, powder-coated surfaces). Adheres to 'difficult' low-surface energy items (PVC piping, blow-molded equipment cases, ABS plastics, recycled plastics).