7169 Results for: "Poulten&pageNo=43&view=easy"

Supplier: Restek

Integra-Guard® columns are designed for leak-free connection between the guard column and the analytical column. The guard column section is marked separately from the analytical column, using high-temperature string.

Supplier: GA

Removable deep-freeze labels for vials, tubes, and freezer boxes. These thermal transfer freezer labels have a glove-friendly adhesive that ensures the labels can be easily removed without leaving any adhesive residue.

Supplier: MACHEREY-NAGEL

NUCLEODUR® Sphinx RP is a bifunctional RP phase with a balanced ratio of propylphenyl and C18 ligands, using in HPLC.

Supplier: MERKLINGER PRAZISION WERKZEUG

This column-packing technology is based on a combination of vacuum suction with subsequent column bed compression that stabilises the packing. A common water-jet pump is used to generate the vacuum. The sorbent slurry is sucked through a packing reservoir into the column by applying low pressure at the bottom end of the column.

Supplier: RAININ

These thin-wall tips are designed to fit RAININ and Pipetman pipettes with conical shafts, Eppendorf and Labsystems pipettes. Some tips feature a hydrophobic filter which forms a barrier against aerosols and liquids eliminating potential sample and pipette cross contamination.

Supplier: Restek

General purpose columns for solvent impurities, PCB congeners (e.g. Aroclor mixes), simulated distillation, arson accelerants, gases, natural gas odorants, sulphur compounds, essential oils, hydrocarbons, semivolatiles, pesticides, oxygenates.

Supplier: CHIRAL TECHNOLOGIES

These columns have the same coated chiral selector as found in the normal phase stationary phases, however in comparison, they use a different bounded silica as the base material which stabilises the CSP.

Supplier: VARIAN

The CP-Si™l line consists of a range of stationary phases which are based on a polysiloxane backbone. Functional groups are added to the polymer to introduce selectivity. Each polymer used for the CP-Sil line is manufactured in-house and is optimised to obtain highest degree of reproducibility.

Supplier: TEKNOMEK

Our fully welded stainless steel workbenches with two shelves are supplied ready to use. Features include solid under shelf, with option of upstand to stop items falling off the back, static or mobile.

Supplier: Agilent

ZORBAX® Extend-C18 columns have high efficiency and a long life at high pH upto pH 11,5 with more effieincy and better peak shape than polymer-based columns.

Supplier: Q BIOANALYTIC

Vibrio alginolyticus causes eye, ear and wound infections. It can be tested using this Real-Time PCR test. The analysis can be done in water and food samples. You can use this test in combination with an appropriate pre- enrichment in alkaline peptone-water or you can confirm bacterial colonies on agar plates.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 HTec is a high density monomeric octadecyl modified silica phase for analytical and preparative HPLC.

Supplier: Biotium

Label your antibody with one of our superior CF® Dyes in 30 minutes without a purification step. Labelling tolerates many common buffer components including BSA and ascites.

Supplier: TEKNOMEK

This stainless steel workbench features a solid undershelf, perfect for storing smaller items out of the way, but close to hand for when they are needed. Durable and strong, this range is ideal for heavier payloads. Fully welded, they reduce the risk of dirt traps.

Supplier: TOSOH Bioscience

TSKgel ODS-100V/ODS-100Z columns incorporate the best-inclass surface properties to limit secondary interactions of basic, acidic and chelating compounds.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g. Aroclor mixes), essential oils, semivolatiles. Column specifically tested for low-bleed performance.

Supplier: Thermo Fisher Scientific

A high performance aminopropyl phase that gives excellent chromatographic properties in three modes: Weak anion exchange, reversed phase and normal phase.

Supplier: Agilent

Bio SEC-3 columns are packed with spherical, narrowly dispersed 3 µm silica particles coated with a proprietary hydrophilic layer for high recovery and minimal secondary interactions which provides more consistent separations.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Gravity is an octadecyl modified silica phase with a high density coverage, using for HPLC.

Supplier: bimos

Neon supports the forward-leaning sitting position that is often necessary in lab work. Its modern design matches the high-tech laboratory environment perfectly and of course it has all the characteristics you would expect of a good laboratory chair. It is seamless, easy to clean, washable, and resistant to disinfectants. So, Neon is the ideal solution for the laboratory, when a really comfortable ergonomic chair is needed.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Avantor

These high performance HPLC columns contain high purity spherical silica.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C8 Gravity is an octyl modified silica phase with a high density coverage, using for HPLC.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: VWR Collection

Weights made from anti-magnetic, polished stainless steel. Suitable for medium resolution precision electronic balances. Weights have adjustment cavities for weights of more than 20 g.

Supplier: 3M

3M™ SecureFit™ safety helmet X5500 series provides secure, comfortable, and adjustable head protection for workers in a variety of situations. The helmets feature adjustable positioning and easy-turning, 4-point ratchet suspension systems with the exclusive 3M™ pressure diffusion technology. The X5500 series also feature 3M™ UVicator™ Sensors that indicate damaging levels of ultraviolet (UV) light.

Supplier: VELP SCIENTIFIC

These BOD incubators have been designed to keep any product at a constant temperature, where accurate and precise temperature control is required. For applications where monitoring the sample is extremely important, the I models are ideal. The controlled heating and cooling thermoregulation system enables the user to select an operating temperature between 3 and 50 °C. The E models have wireless connection for TEMPSoft™. The I models have an internal transparent door and wireless connection for TEMPSoft™ and an auto tuning system which provides constant control of the internal temperature, by continuously comparing the detected and set values and aligning them via a precise and rapid adjustment system. All models have two internal sockets.

Supplier: MICROSOLV

These useful HPLC columns are TYPE-C™ silica columns and have a single, direct silicon-carbon point attachment to the silica-hydride surface.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 ec is a medium density monomeric octadecyl modified silica phase for HPLC.

Supplier: Thermo Fisher Scientific

White PC, autoclavable.