245 Results for: "NEXOPART"

Supplier: NEXOPART

Shaker, Sieve Shaker, VWR®

Supplier: NEXOPART

Shaker, Sieve Shaker

Supplier: NEXOPART

The HAVER rotating sample reducer produces small but representative sample quantities of solids and suspensions. It combines three dividing methods in one unit and achieves an accuracy of 99,9%.

Supplier: NEXOPART

Shaker, Sieve Shaker

Supplier: NEXOPART

The EML 200 series offers different types of units. All models are suitable for 50 to 203 mm Ø sieves, a maximum sample/batch load of 3 kg, and have a cast aluminium housing and improved clamping system.

Supplier: NEXOPART

Holds a maximum of five sieves with diameters up to 203 mm.

Supplier: NEXOPART

These ALPINE air jet test sieves are suitable for fully automatic sieve recognition. These test sieves are made of brass/stainless steel frame with metal wire cloth made from stainless steel.

Supplier: NEXOPART

Shaker, Sieve Shaker

Supplier: NEXOPART

For dividing sieved material into representative test sieve samples.

Supplier: NEXOPART

Using ultrasonic frequency variation for test sieving, even powders with separating cuts of ≤300 micron can be sieved. Fitting at least one HAVER-test sieve with a frequency variation system enables such analyses.

Supplier: NEXOPART

It is used for thorough and gentle cleaning of sieves.

Supplier: NEXOPART

Shaker, Sieve Shaker, VWR®

Supplier: NEXOPART

These electromagnetically-driven test sieve shakers are designed for sieve analysis with optimum three-dimensional sieving action. The self-re-adjusting amplitude, which uses permanent acceleration measurement of the whole sieve tower, balances the oscillation of the shaker and its stand. This guarantees that amplitude stays the same, irrespective of the feed quantity and the installation position.

Supplier: NEXOPART

These test sieves are suitable both for hand sieving as for dry and wet sieving with all Haver test sieve shakers. Bulk material of different branches can be classified and separated with these test sieves; industrial rocks and minerals, food, glass, ceramic, granulates, powders, fertilizer, etc.

Supplier: NEXOPART

For dry sieving. Tyler Ro-Tap® shakers RX 29 CE and RX 30 CE reproduce the circular and tapping motion of hand sieving, but in a repeatable mechanical action. This sieve shaker makes a circular movement of the sieve stack and a mechanical arm makes a tapping movement on the top of the sieve stack, thus creating a perfect and repeatable imitation of hand shaking with additional tapping of the sieve on the side. They are operated in a totally enclosed cabinet, which guarantees the safety of the operator, and reduces the sound emissions significantly.

Supplier: NEXOPART

Test sieve, Stainless steel, Slope device, Height: — mm, Ø: 200/300 mm

Supplier: NEXOPART

Shaker, Sieve Shaker, Tyler Ro-Tap®

Supplier: NEXOPART

Grid sieve with frame made from aluminium, with parallel cylindrical bars.

Supplier: NEXOPART

Shaker, Sieve Shaker, VWR®

Supplier: NEXOPART

IQ/OQ documentation to assist with GLP compliance.

Supplier: NEXOPART

These sieves are recommended for hand sieving of coarser materials. They are used to analyse and separate great sample quantities of industrial rocks and minerals, cereals, glass, ceramic.

Supplier: NEXOPART

For test sieves up to 400 mm diameter or square sieves up to 500×500 mm. The UWL 400 is an efficient test sieve shaker that achieves optimum results for large feed quantities. It creates a three-dimensional sieving action, and is especially designed for coarse grained products. The UWL 400 T is suitable for dry sieving; the UWL 400 N is suitable for wet sieving, and the UWL 400 H is suitable for square test sieves with beechwood frames.

Supplier: NEXOPART

Guide rod for 'Classic' or HAVER 'TwinNut' clamping system, 660 mm long (one only), For: EML 200, 315 digital plus

Supplier: NEXOPART

HAVER CSA 5,4 software enables PC-aided analysis of standard sieve systems. Three versions are available which differ in the scale of functions. The results of measurements are documented for quality assurance purposes and can be introduced into statistics and reports due to the complex data processing.

Supplier: NEXOPART

CALIBRATION OF TEST SIEVES ACC. TO ISO 3310 WITH A DIAMETER D1 OF UP TO 203 MM INDIVIDUAL INSPECTION WITH INSPECTION CERTIFICATE 3.1 ACCORDING TO EN 10204 1 * 1 items

Supplier: NEXOPART

Precision fuse, 20x5 mm, 3.15 Ampere MT for EML 200 1 * 1 items

Supplier: NEXOPART

connection cable, 1,5 m long with plug and applicance plug CH 1 * 1 items

Supplier: NEXOPART

connection cable, 1,5 m long with plug and applicance plug EU 1 * 1 items

Supplier: NEXOPART

Test Sieve,350x60w0,5mm ASTM E11/FDA HAVER Test Sieve 350x60 mm - stainless steel frame AISI 304 Stainless steel metal wire cloth AISI 316 w 500 µm ASTM E11 No. 35 1 * 1 items

Supplier: NEXOPART

Test Sieve, 200x50w0,01mm R3310-3 1 * 1 items