152917 Results for: "Milk+powder&pageNo=14"
Carrier proteins, Imject™ Maleimide-Activated Blue Carrier™
Supplier: Thermo Fisher Scientific
Imject™ Maleimide-Activated Blue Carrier™ Protein enables conjugation of a sulfhydryl-containing hapten to elicit an immune response and antibody production against the hapten. Blue Carrier™ Protein is a haemocyanin from the Concholepas concholepas mollusc with immunogenic properties similar to keyhole limpet haemocyanin. Blue Carrier™ Protein has a large mass (~8 × 106 Da) and has been successfully used in polyclonal and monoclonal antibody production for
synthetic haptens and peptides.
Expand 1 Items
Protein ladders (pre-stained), PageRuler™
Supplier: Thermo Fisher Scientific
PageRuler™ pre-stained protein ladders are a mixture of ten blue-, orange- and green-stained proteins (10 to 180 kDa) for use as size standards in protein electrophoresis (SDS-PAGE) and Western blotting.
Expand 2 Items
Columns and standards for GPC/SEC
Supplier: VARIAN
Column type: HPLC column, PS calibration kit, S-H-10, 10×0,5 g
Expand 4 Items

Avantor in the heart of every lab!
Discover our special offers on laboratory products from Consumables to Equipment used in every lab!
VWR®, Beard Cover, PP
Supplier: VWR Collection
Basic beard cover made from non woven PP. For non critical applications.
Expand 1 Items
VWR®, Glass Beads for Grinding and Homogenisation
Supplier: VWR Collection
Small beads suitable for use with vortex mixers and tube homogenisers.
Expand 1 Items
VWR®, Stainless Steel Raised Shelves
Supplier: VWR Collection
Shelves, Stainless steel raised shelf, For: VWB2 12
Expand 1 Items
John Guest® Push-to-Connect Check Valves, Acetal
Supplier: Avantor Fluid Handling
Get a secure connections with quick disconnection.
Expand 1 Items
Avantor® ACE® C18-Amide, HPLC/UHPLC Columns, 10 µm
Supplier: Avantor
Avantor® ACE® C18-Amide is a uniquely designed stationary phase offering improved retention of polar compounds, enhanced phenolic resolution and alternative selectivity to C18 bonded columns. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative.
Expand 16 Items
Avantor® Hichrom, End Fittings
Supplier: Avantor
Avantor® Hichrom, End fitting with ferrule, FEM, 1/4 - 1/16"
Expand 1 Items
Masterflex® Single-Use Ultrasonic Flow Sensors, Avantor®
Supplier: Avantor Fluid Handling
Obtain accurate flow readings without introducing a new material to the fluid path.
Expand 1 Items
Avantor® ACE® CN-ES, HPLC Columns, 10 µm
Supplier: Avantor
Avantor® ACE® CN-ES combines CN polar selectivity with enhanced hydrophobicity, enabling the benefits of both interactions to be fully exploited. Extra phase stability and increased column lifetime is provided by an extended alkyl chain spacer between the silica surface and cyano group. Avantor® ACE® CN-ES is suitable for both reversed phase and normal phase separations.
Expand 17 Items
Accessories for Cryo Boxes
Supplier: GLW
Divider, PP, natural, 10×10 compartments, 1×121×27 mm, 36 g
Expand 2 Items
Tubes, rack packed, non-sterile
Supplier: Brand
PP tubes and PE caps, non-sterile.
Expand 7 Items
Sample storage tubes, blank and alphanumeric
Supplier: THERMO MATRIX TECHNOLOGIES
Abgene blank and alphanumeric storage tubes are manufactured from 100% virgin, medical-grade polypropylene. Storage tubes are leak tested to ensure the integrity and security of samples and with a V-bottom design, our alphanumeric storage tubes facilitate sample recovery.
Expand 4 Items
VWR®, Deep Well Plates, 96 Round Well
Supplier: VWR Collection
Made of virgin PP to minimise extractables.
Expand 3 Items
VWR® pHenomenal® Conductivity Cell
Supplier: VWR Collection
Electrode, Conductivity, VWR® pHenomenal®, pHenomenal® CO11, 10 µS/cm - 20 mS/cm, 0...+80 °C, Epoxy, Ø×L: 15,3×120 mm, 0,84 cm-1, 8-pin, 1,5 m cable
Expand 1 Items
VWR®, Aluminium Crimp Caps, ND11 with Central Hole, 5,5 mm and Septum
Supplier: VWR Collection
VWR®, Chromatography vial closure, Aluminium, Ø: 11 mm, Type: Clear lacquered aluminium, Hardness: 55° shore A, Septum: Silicone white/PTFE blue, cross-slitted, Thickness: 1,5 mm
Expand 2 Items
Disposable cuvettes
Supplier: KARTELL
Disposable cuvettes made from optical polystyrene (PS) or PMMA with a transmission value at 300 nm of 70%.
Expand 8 Items
Disposable cuvettes
Supplier: SEMADENI
Disposable cuvettes for photometric measurements in the visible range (350 to 800 nm).
Expand 3 Items
Masterflex® B/T® Replacement Fuses, Avantor®
Supplier: Avantor Fluid Handling
Make the most of your drive with these replacement parts.
Expand 3 Items
Thermometer for pycnometer
Supplier: Ludwig Schneider GmbH & CO. KG
Thermometer for pycnometer in standard ground joint size NS 10/19, enclosed type.
Expand 1 Items
Water bath, digital, WB-436 D
Supplier: GERBER FUNKE
Digital water bath with stainless steel inner and outer casing. Heating elements are located separately within the casing. Ideal for dairy use, wide range of accessories is available, it is recommended to use distilled water with the bath.
Expand 1 Items
Stopcock, three-way, acc. to Czako
Supplier: witeg Labortechnik
Stopcocks made of borosilicate glass.
Expand 1 Items
Centrifuges, compact, EBA 200 / 200 S
Supplier: Hettich
These compact centrifuges come with a fixed angle rotor and are ideal for low numbers of samples.
Expand 2 Items
Measuring cylinders, tall form, PP
Supplier: KARTELL
PP, translucent, tall form.
Expand 2 Items
Tissue grinders, Dounce type
Supplier: DWK Life Sciences
Wheaton Dura-Grind® stainless steel Dounce tissue grinders provide a rugged alternative to glass Dounce tissue grinders. Smooth pestle action requires less effort than glass tissue grinders. Precision machined No. 316 stainless steel to low tolerance of 0,0124 mm.
Expand 2 Items
Centrifuge tubes, round bottom
Supplier: witeg Labortechnik
DURAN®, borosilicate glass.
Expand 1 Items
VWR®, Frio Temp Precision Verification Thermometers
Supplier: VWR Collection
These thermometers are suitable for applications with freezers, refrigerators, incubators, ovens and blood banks. The thermometer is placed in a bottle filled with a liquid.
Expand 2 Items
Anti-GSTK1 Rabbit Polyclonal Antibody (Biotin)
Supplier: US Biological
Anti-GSTK1 Rabbit Polyclonal Antibody (Biotin)
Expand 1 Items
Glutamic-C™, sequencing grade
Supplier: G-Biosciences
SG-Glutamic-C™ is a serine endopeptidase, from S. aureus V8, that is highly specific for the cleavage of peptide bonds at the carboxy side of either aspartic or glutamic acid, depending on the buffer used. In Tris-HCl buffer, in particular in the absence of phosphate ions, the enzyme is specific for the glutamyl site. Recommended buffers for fragmentation of proteins using this enzyme are 50 mM Tris-HCI, pH 8,0 or bicarbonate buffer. Highly purified preparations of SG-Glutamic-C™ are chemically modified making the enzyme both resistant to autolysis and stabilises its enzymatic activity.