6753 Results for: "Microplate+centrifuge&pageNo=37&view=list"

Supplier: Heidolph Instruments GmbH & Co.KG

Category A for: Reax top/control
Category B for: Vibramax 100, Rotamax 120
Category C for: Vibramax 110
Category D for: Unimax 1010, Duomax 1030, Polymax 1040 and Promax 1020
Category E for: Unimax 2010, Promax 2020 and Polymax 2040
Category H for: Multi Reax

Supplier: Binder

Calibration certificate, expanded - for temperature; for extending the measurement in center of chamber to include another test temperature, For: UF V

Supplier: THERMO LABSYSTEMS LIFE SCIENCE

Varioskan™ LUX comes equipped with a range of measurement technologies including absorbance, fluorescence intensity and FRET as standard, and with optional luminescence, AlphaScreen and time-resolved fluorescence (TRF) modules. The instrument selects the measurement wavelength using filters or monochromators, depending on which is optimal for each measurement technology.

Supplier: Brady

Paper Labels with Permanent Rubber Adhesive (B-424) provide good contrast and smear resistance for thermal transfer and barcode printing applications.

Supplier: Brady

Ultra aggressive metallised polyester (B-486) is ideal for rating/serial plates that use barcodes, alphanumerics, graphic symbols and logos, and require nameplate-like quality.

Supplier: VWR Collection

Water-resistant/shockproof thermometer (IP 64) replaces hazardous mercury units and is ideal for wet labs, wash-down areas, outdoors and virtually all field applications.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Gravity is an octadecyl modified silica phase with a high density coverage, using for HPLC.

Supplier: Brady

The B-7576 material is designed to leave a 'VOID' footprint when the label is removed, the footprint also appears on the surface of the label so it cannot be reused.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: Ahlstrom-Munksjö

Ahlstrom-Munksjö manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, deionised water and are further treated with dilute acid to remove any remaining organic and inorganic impurities. All quantitative grades are manufactured in a strictly controlled environment that ensures high uniformity and high purity from filter to filter.

Supplier: VWR Chemicals

Ready to use culture media for microbiological test requirements in the food industry, water, environmental control and in the pharmaceutical industry. The range is manufactured from high quality raw materials. All the culture media are manufactured using selected dehydrated bases, and comply with various standards. All media are produced using the latest technology and are subject to strict quality controls carried out by qualified microbiologists.

Supplier: 3M

3M™ SecureFit™ safety helmet X5500 series provides secure, comfortable, and adjustable head protection for workers in a variety of situations. The helmets feature adjustable positioning and easy-turning, 4-point ratchet suspension systems with the exclusive 3M™ pressure diffusion technology. The X5500 series also feature 3M™ UVicator™ Sensors that indicate damaging levels of ultraviolet (UV) light.

Supplier: VELP SCIENTIFIC

These BOD incubators have been designed to keep any product at a constant temperature, where accurate and precise temperature control is required. For applications where monitoring the sample is extremely important, the I models are ideal. The controlled heating and cooling thermoregulation system enables the user to select an operating temperature between 3 and 50 °C. The E models have wireless connection for TEMPSoft™. The I models have an internal transparent door and wireless connection for TEMPSoft™ and an auto tuning system which provides constant control of the internal temperature, by continuously comparing the detected and set values and aligning them via a precise and rapid adjustment system. All models have two internal sockets.

Supplier: BANDELIN-ELECTRONIC

Ultrasonic bath accessories, Inset beaker, KB 04, plastic, 400 ml, Ø 76 mm, height 110 mm, with ring GR 04, without lid, For: SUPER RK 31 / H, DIGITEC DT 31 / H

Supplier: EPPENDORF

Replacement channel, 100 µl, yellow, Research® plus, For: Eppendorf Research® plus

Supplier: Abcam

Rabbit monoclonal [EPR4879] to Cdc37 (phospho S13).

Supplier: Biowest

These irrigating buffers and salt solutions are sterile, physiological balanced solutions intended for use in the maintenance of mammalian cells, where a chemically defined, balanced salt solution provides an environment that will maintain the structural and physiological integrity of cells in vitro. Applications include the intermediate steps for cultivation of cells, like washing, centrifugation, suspending and counting, as well as for many analytical methods or biochemical treatments. Principally these solutions should be used to keep the cells in suspension only for minutes or a few hours maximum. These buffers and solutions are not cell culture media.

Supplier: Restek

These columns are based on a wide pore material designed for optimal large-molecule separations. Base-deactivated, wide-pore packing exhibits excellent peak shape for a wide range of compounds. Less retention in reversed phase assays than Viva C18 or Viva C8.

Supplier: VARIAN

Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone and ethyl acetate.

Supplier: Restek

Viva C18 are monomeric octadecylsilane columns, highly base deactivated wide pore packing that exhibits peak shape for a wide range of compounds from acidic through slightly basic. General purpose column for analyzing large molecules and biomolecules.

Supplier: Merck

Nylon filters are compatible with a broad range of solvents. Two types of filters are available, membrane filters with pore sizes ranging from 0,20 to 1,20 µm and woven net filters with mesh openings ranging from 10 to 180 µm.

Supplier: Thermo Fisher Scientific

White PC, autoclavable.

Supplier: asecos

Fireproof safety cabinets, classified type 30 (fire resistant up to 30 minutes), safe, durable, robust and convenient with transport base and bicoloured cabinet design.

Supplier: Brady

Labels for the M610 and M611 Thermal Transfer Portable Printers. These parts can also be printed on the M710 Label Printer provided the roll adapter (M71-ADAPT) is used.

Supplier: Brady

PermaSleeve® PS heat-shrink polyolefin (B-342) wire marking sleeves combine speed, ease of use, and permanence to create long-lasting, high quality identification.

Supplier: Amarell

These total immersion thermometers, with enclosed scale, are suitable for government testing and official calibration.

Supplier: VARIAN

The PLRP-S media, rigid poly(styrene/divinylbenzene) particles, are available in a range of pore sizes for small molecule, synthetic biomolecule and macromolecule purification. Their thermal and chemical stability makes them ideal for purifications that require extreme conditions for sample preparation, compound elution and column regeneration

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Pinnacle® DB Phenyl columns offer alternate selectivity to straight chain hydrocarbon phases, especially for aromatic analytes. Replaces Hypersil® BDS Phenyl and Pinnacle® Phenyl Amine.

Supplier: CENTURION SAFETY PRODUCTS

These vented safety helmets are made of HDPE. They are available with or without wheel ratchet.

Supplier: GRANT INSTRUMENTS

Advanced benchtop UV cabinets providing aseptic conditions for a variety of biomedical and biochemical procedures. Innovative dual UV system: built-in UV-air recirculator provides constant decontamination of the air volume within the cabinet while working and traditional surface UV decontamination while the door is closed.