13110 Results for: "Levulinic+acid&pageNo=48"

Supplier: GA

Continuous writable tape for cryogenic use. Provided with a strong permanent adhesive, this cryo tape will stay firmly attached during prolonged exposure to low temperature conditions, as well as repeated freeze-thaw cycles. Available in assorted colours.

Supplier: NEXOPART

These test sieves are suitable both for hand sieving as for dry and wet sieving with all Haver test sieve shakers. Bulk material of different branches can be classified and separated with these test sieves; industrial rocks and minerals, food, glass, ceramic, granulates, powders, fertilizer, etc.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: MACHEREY-NAGEL

NUCLEODUR® HILIC is an ammonium – sulfonic acid modified silica phase for HPLC.

Supplier: Agilent

Each method validation kits contain three HPLC columns with the same column type (i.e., bonded phase, particle size, configuration) but from different manufacturing lots.

Supplier: VARIAN

The CP-Wax™ lines of chemically bonded columns offer a broad range of selectivities for method optimisation. The backbone of this series stationary phases is made of a polyethylene glycol.

Supplier: Spectrum Laboratories

Designed for gentle tangential flow filtration of small volumes ranging from 1 to 100 ml. MicroKros® modules are typically operated by a peristaltic pump, these devices also offer the unique advantage of manual operation for quick and convenient separations for small volumes.

Supplier: GA

These permanent labels are designed for the identification of tubes, vials, boxes, and other plastic or cardboard containers stored in ultra-low temperature laboratory freezers.

Supplier: MICROSOLV

The many advanced features of the this column produces a very stable, efficient and unique HPLC column with unique selectivity for steroids and other compounds.

Supplier: G-Biosciences

Ready-to-screen, human, single tissue blots, from both normal and tumour tissues. G-Biosciences pre-made blots are prepared with the appropriate GenLysate™ and 50 μg protein is loaded onto a 4 to 20% denaturing polyacrylamide gel, along with a prestained molecular weight marker. After the proteins are resolved, they are transferred to a PVDF membrane, using our Western transfer buffer.

Supplier: Restek

SV internal standard mix, includes acenaphthene-d10, naphthalene-d8, chrysene-d12, perylene-d12, 14-dichlorobenzene-d4, phenanthrene-d10, with 4000 µg/ml each in methylene chloride, 1 ml/ampule, : N/A

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: ISERA

HPLC column of the ISAspher line guarantee the highest possible reliability in a wide range of applications.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles.

Supplier: Agilent

ZORBAX® 80 Å StableBond® columns are made using bulky, patented, unique silanes that sterically protect the siloxane bond. Acid labile endcapping reagents are not used.

Supplier: Restek

Use these liners for increased sensitivity. They are manufactured from borosilicate glass or metal.

Supplier: TEKNOMEK

This stainless steel workbench features a multi-bar under shelf which helps maintain cleanroom airflow and is perfect for storing items out of the way, but close to hand for when they are needed.

Supplier: Merck

MF-Millipore™ filters without Triton® surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore™ filters.

Supplier: Abcam

Rabbit polyclonal to USP48.

Supplier: bimos

Neon supports the forward-leaning sitting position that is often necessary in lab work. Its modern design matches the high-tech laboratory environment perfectly and of course it has all the characteristics you would expect of a good laboratory chair. It is seamless, easy to clean, washable, and resistant to disinfectants. So, Neon is the ideal solution for the laboratory, when a really comfortable ergonomic chair is needed.

Supplier: Brady

In line with the GHS (Global Harmonised System), identification elements need to be attached to chemical containers - in particular new warning symbols, hazard statements and safety data sheets. The new identification elements have been mandatory since 21 January 2009 and supplement the REACH regulation on the registration, evaluation, authorisation and restriction of chemicals.

Supplier: Merck

Nylon filters are compatible with a broad range of solvents. Two types of filters are available, membrane filters with pore sizes ranging from 0,20 to 1,20 µm and woven net filters with mesh openings ranging from 10 to 180 µm.

Supplier: bimos

Neon supports the forward leaning sitting position that is often necessary in lab work. Its modern design matches the high-tech laboratory environment perfectly and has all the characteristics you would expect of a good laboratory chair. It is seamless, easy to clean, washable, and resistant to disinfectants making Neon the ideal solution for the laboratory when a really comfortable ergonomic chair is needed.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 HTec is a high density monomeric octadecyl modified silica phase for analytical and preparative HPLC.

Supplier: IKA

The C 7000 calorimeter is designed to measure the calorific power of samples in a dry procedure.

Supplier: CHIRAL TECHNOLOGIES

These columns have the same coated chiral selector as found in the normal phase stationary phases, however in comparison, they use a different bounded silica as the base material which stabilises the CSP.

Supplier: RAININ

These thin-wall tips are designed to fit RAININ and Pipetman pipettes with conical shafts, Eppendorf and Labsystems pipettes. Some tips feature a hydrophobic filter which forms a barrier against aerosols and liquids eliminating potential sample and pipette cross contamination.

Supplier: VARIAN

The CP-Si™l line consists of a range of stationary phases which are based on a polysiloxane backbone. Functional groups are added to the polymer to introduce selectivity. Each polymer used for the CP-Sil line is manufactured in-house and is optimised to obtain highest degree of reproducibility.

Supplier: Restek

General purpose columns for solvent impurities, PCB congeners (e.g. Aroclor mixes), simulated distillation, arson accelerants, gases, natural gas odorants, sulphur compounds, essential oils, hydrocarbons, semivolatiles, pesticides, oxygenates.

Supplier: VWR Chemicals

Available as 90 mm plates acc. to standards. TLHTh (Tween®, lecithin, histidine, thiosulphate) are used as disinfectant neutralisers. Bags are available double- or triple-wrapped. One pack per bag displays the irradiation indicator.