1242 Results for: "LABCONCO"

Supplier: LABCONCO

Telescoping base stands with fixed feet, nominal width of 76,2 mm, 914×737 mm, 43 kg, For: —

Supplier: LABCONCO

Desiccator cabinet, Vacuum tubing kit, with tubing inner Ø 6,35 mm and 12,7 mm, each 1219 mm long, tubing clamps, barbed reducer

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: LABCONCO

XPert™ filtered balance stations are vented balance enclosures designed to protect the user during powder weighing operations. The built-in HEPA filter, mounted in the upper plenum, removes particulates, so that clean air is exhausted to the atmosphere. XPert® filtered balance station is 'stationary' because ducting to an outside blower or house exhaust system is required. Powder weighing applications found in pharmaceutical research and other industries are ideal for these enclosures. Interior dimensions accommodate large micro and analytical balances and containment-enhancing features ensure personnel safety.

Supplier: LABCONCO

This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Supplier: LABCONCO

These Biosafety cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. Cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research.

Supplier: LABCONCO

Handy cart stores lab supplies and may be moved easily to within reach of the user working at a bench, fume hood or biological safety cabinet. Three right side compartments accommodate pipettes and other supplies. Top left side compartment with front panel cutouts accommodates boxes of wipes and gloves. The hinged panel may be pivoted down for loading. Drawer holds a variety of miscellaneous small instruments and supplies. Open storage area in bottom holds larger equipment and supplies. Work surface and bottom are constructed of corrosion-resistant white high density polyethylene that is easy to clean. Remaining components are constructed of corrosion-resistant white ABS.

Supplier: LABCONCO

This glove box is designed to create controlled oxygen and moisture atmospheres for working with products that are easily oxidized. The glove box features a one-piece moulded fibreglass liner, two 25 W fluorescent lights, and an optional pressure control module.

Supplier: LABCONCO

Watertight pan cart with durable 18-gauge welded steel frame has a glacier white epoxy-coated rust-resistant finish. Ideal for transporting cellware, cages, glassware, and more.

Supplier: LABCONCO

This glove box provides a leak-tight environment for work with contamination-sensitive materials.

Supplier: LABCONCO

This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Supplier: LABCONCO

PVC exhaust duct is type one, unplasticised, schedule 40, lightweight, and corrosion-resistant.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: LABCONCO

Use the Sash-glider to clean both sides of a biological safety cabinet's sash while it remains closed, to avoid contamination risks.

Supplier: LABCONCO

Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware in critical washing environments.

Supplier: LABCONCO

It offers a choice to protect materials that do not generate harmful aerosols or vapors. Its been designed with 99,99% efficient HEPA filter, the air from this minimizes cross contamination in the work area and provides a particulate free work environment. It has wide range of applications including plant tissue culture research, media preparation, electronic part inspection, syringe filling, medical device assembly and non hazardous parenteral drug formulation. These benches should never be used in conjunction with biohazardous material, toxins or radionuclides.

Supplier: LABCONCO

This mobile equipment table may be used to transport heavy equipment and to provide auxiliary bench space. With height adjustments from 28,75 to 35,75", it may be raised to the same height as most laboratory benchtops. Solid epoxy work surface, powder-coated square tubular steel frame.

Supplier: LABCONCO

4ft Logic Class II, Type A2 Biosafety Cabinet with 10inch sash opening, right-side service fixture, UV lamp, right and left side Vacu-Pass Portals and base stand, 230V, 50/60Hz, Schuko 1 * 1 items

Supplier: LABCONCO

FREEZONE 6L -50C CONSOLE FREEZE DRYER, STAINLESS STEEL COLLECTOR, PURGE VALVE, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

FREEZONE 6L -84C CONSOLE FREEZE DRYER, STAINLESS STEEL COLLECTOR, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

FREEZONE 6L -84C CONSOLE FREEZE DRYER, PTFE-COATED COLLECTOR, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

FREEZONE 12L -50C CONSOLE FREEZE DRYER, STAINLESS STEEL COLLECTOR, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

FREEZONE 6L -84C CONSOLE FREEZE DRYER, PTFE-COATED COLLECTOR, PURGE VALVE, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

FREEZONE 18L -50C CONSOLE FREEZE DRYER, PTFE-COATED COLLECTOR, STOPPERING TRAY DRYER, 230V, NATURAL REFRIGERATION GAS 1 * 1 items

Supplier: LABCONCO

Stainless steel Chamber Assembly 1 * 1 items

Supplier: LABCONCO

FreeZone Triad Freeze Dryer, 230V, 50 Hz 1 * 1 items

Supplier: LABCONCO

Exhaust HEPA Filter 6 Foot Model 1 * 1 items

Supplier: LABCONCO

28-Port Manifold, 24.3 w x 10.6 d x 18.3 h, for use with FreeZone Console Freeze Dryers - Height between manifolds and between manifold/freeze dryer extended by 5 1 * 1 items

Supplier: LABCONCO

CentriVap Cold Trap -50 230V, Acrylic Lid, Schuko Eco-Cool 1 * 1 items

Supplier: LABCONCO

12-17mm Stainless Steel Rotor - CentriVap Pro 1 * 1 items