1238 Results for: "LABCONCO"

Supplier: LABCONCO

Heated product shelves with clear chamber for drying bulk samples, or drying serum bottles, vials or microplates. Chamber connects to a FreeZone® freeze dryers for control and recording of the shelf temperature from the Lyo-Works display.

Supplier: LABCONCO

Accessory for Freeze Dryer, 14-Port manifold, 304 stainless steel with fourteen neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×262 mm

Supplier: LABCONCO

End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Evaporator, Centrifugal, Glass trap, 2550 ml, for use in FreeZone freeze dry units

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

SpillStopper™ work surface, right rear cupsink cutout, 1219×762×32 mm, 50 kg, For: Laboratory Hoods, Protector®

Supplier: LABCONCO

Storage cabinet accessory, Protector®, Interior shelf kit, 61 mm Protector® acid storage cabinets

Supplier: LABCONCO

Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

Required and replacement accessories for Protector filtered fume hoods. These accessories are for use with Labconco Protector Echo® and Airo® filtered fume hoods. For all filters and prefilters: The number of filters/prefilters required depends on the width of the hood and if it is an initial order or a replacement order.

Supplier: LABCONCO

Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Glassware washing machines, Retrofit kit upper rack

Supplier: LABCONCO

These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Supplier: LABCONCO

Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: LABCONCO

Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

Supplier: LABCONCO

Pump inlet filter

Supplier: LABCONCO

Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

Supplier: LABCONCO

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Supplier: LABCONCO

Flexible duct connections reduce vibration between the blower and PVC ductwork.

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: LABCONCO

FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Supplier: LABCONCO

This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Supplier: LABCONCO

Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

Supplier: LABCONCO

Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

Supplier: LABCONCO

FreeZone® benchtop shell freezers provide a compact system for prefreezing samples for lyophilization.

Supplier: LABCONCO

Moisture monitor (dew point measurements), 0 - 6000 ppm; incl. meter, probe, attachment plug, and calibration stand; for placement inside the glove box’s main chamber; 140×203×46 mm, 230 V, 50/60 Hz

Supplier: LABCONCO

These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, For: Laboratory Hoods, Fiberglass 30