Supplier: Industrial Physics

Specific gravity cups for determining the specific gravity or density (or weight per gallon wpg) of coatings, pastes or similar liquids.

Supplier: Industrial Physics

This UV pocket flashlight is designed to detect contaminations that react under UV illumination and can not be seen with naked eye such as some organic fats and alkaline contaminants. They are also suitable to inspect the cleanliness of steel prior to painting.

Supplier: Industrial Physics

Perfect tool to use for inspection of professional coating jobs on large structures, ships, tanks, buildings etc.. The inspection mirrors offers a clear view on hard-to-reach places and ideal for a visual inspection for “holy-days” and general quality control for matters as coverage, cleanliness of blasted steel etc.

Supplier: Industrial Physics

This dual digital timer can be pre-set for both 'in position' and 'recovery' time.

Supplier: Industrial Physics

This powerful TQC aluminium LED pocket flashlight produces a very impressive 200 lumens and provides a projection distance of 250 m. It is suitable for applications in protective coatings, corrosion control, coating laboratories, paint production, surface finishing, powder coating, decorative coatings and building maintenance.

Supplier: Industrial Physics

This tape consists of 23 microns polyester films backing for improved moisture resistance, weight and space savings. These tapes are ideal to perform a cross cut hatch adhesion test.

Supplier: Industrial Physics

Ideal for visual inspection of hard-to-reach spots. Spots that are difficult to inspect are even more difficult to blast or coat.

Supplier: Industrial Physics

SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.

Supplier: Industrial Physics

Accessory for coating tester, Water resistant marker

Supplier: Industrial Physics

Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Supplier: Industrial Physics

Durometer, Shore hardness test block kit, includes 7 test blocks (30, 40, 50, 60, 70, 80 and 90 shore hardness) with calibration certificate for Durometer A

Supplier: Industrial Physics

This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

Supplier: Industrial Physics

Automatic Krebs viscometer

Supplier: Industrial Physics

Test panels are used to enhance reproducibility of physical and chemical tests. Each panel is equipped with a hole for hanging and handling.

Supplier: Industrial Physics

Impact tester used to determine the impact resistivity and flexibility of materials.

Supplier: Industrial Physics

Nylon brush for cross cut adhesion test

Supplier: Industrial Physics

Spare Karsten tube, vertical

Supplier: Industrial Physics

Simple hand-held digital thermo/hygrometer.

Supplier: Industrial Physics

This digital tachometer is designed to be used for both contact and non-contact measurements.

Supplier: Industrial Physics

The MaxiLigno are equipped with the latest technology for precision and easy handling.

Supplier: Industrial Physics

This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Supplier: Industrial Physics

This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

Supplier: Industrial Physics

These coated metal calibration standards consist of a set of four calibration plates.

Supplier: Industrial Physics

Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.