37062 Results for: "Hood C Monashee"

Supplier: Bohlender

One connection for up to four HPLC systems that can be integrated directly in laboratory hoods or working tables. b.safe Waste Pipes lead liquid solvent waste directly into connected canisters.

Supplier: DuPont

Hooded coveralls feature Tyvek® fabric on the front of the garment and breathable SMS on the back. Tyvek® under gloves and Tyvek® socks are attached.

Supplier: Bohlender

One connection for collecting liquid waste from up to 2 HPLC systems that can be integrated directly in laboratory hoods or working tables. b.safe Waste Tubes lead liquid solvent waste directly into connected canisters.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. Solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: AVANTOR SERVICES

Internal check and operational testing of fume hood at customer site. Service report included. Spare parts and travel fees not included

Supplier: 3M

Test kits and accessories designed to help your organisation meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate prefilter. FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol.

Supplier: DuPont

These hooded overalls are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: Bohlender

To avoid spill over of canisters through the connection of a waste cap capacitive to a b.safe Display for electronic level control. With the use of b.safe waste tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: HUBEI ORIENT INTL TRADING

These disposable overalls are made from non woven PP. Ideal for non critical applications in industrial, clinical or food processing environments.

Supplier: DuPont

These hooded coveralls, model IC193BWH TS, are made of Tyvek®, a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: CleanAir by Baker

Lighting system for NEG 5

Supplier: Merck

The Stericup® vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop® filter unit with a receiver flask for processing and storing volumes from 150 to 1000 ml in a single, ready-to-use format. Its no-tip, easy-grip flask design and balanced profile improve stability during filtration in tight laminar flow hoods, and the convenient labeling and packaging make it easy to open and track each device.

Supplier: DuPont

These garments are made from a lightweight and durable fabric (<500 g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents.

Supplier: GERBER FUNKE

Hood, Hood, protective, for butyromter rack for 36 samples

Supplier: asecos

Safety workstation is a robust construction made of chemically resistant, anodised aluminium profiles used to protect from harmful substances and vapours in the open containers.

Supplier: Testo

This Testo 420 air capture hood is for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the capture hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate air capture calculations at swirl outlets.

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, For: Laboratory Hoods, Fiberglass 30

Supplier: FRITSCH

Sound absorption hood, made of plexiglas, Sound absorption hood, made of plexiglas, For: PULVERISETTE 0

Supplier: Bel-Art Products, a Part of SP

Benchtop fume hood designed for small facilities or installations in which a number of fume hoods are needed, this unit is mainly used in schools, junior colleges and universities.

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: Bel-Art Products, a Part of SP

Scienceware® Clear View fume hoods are suitable for potentially hazardous fumes and dust. It is constructed of polycarbonate with sleek modern style.

Supplier: 3M

The 3M™ S-series headcovers offer head and face protection, as well as providing eye and face protection from liquid splash and low energy impact (grade F). They are suitable for applications that require frequent replacement of the entire headgear assembly, such as pharmaceutical manufacturing and laboratory work, or in situations where there is less soiling of the outer fabric. All headcovers can be used in conjunction with 3M Powered and Supplied Air systems (e.g. Jupiter™ and Dustmaster™), thus offering respiratory protection.

Supplier: CEMO

Hood, lockable, complete with fittings, suitable for collection stations without hood

Supplier: BUCHI

Cover hood for glass oven

Supplier: BIGNEAT

Accessories for Chemcap Clearview Ductless Fume Hood

Supplier: Bel-Art Products, a Part of SP

PE hood, clear acrylic window.

Supplier: Thermo Scientific

Retrofit kit UV-radiator for Heraguard™ ECO 0.9

Supplier: Bel-Art Products, a Part of SP

The translucent PP plastic hood is non-conductive, chemical-resistant and corrosion-proof. Clear acrylic sash provides unimpeded visibility and light to the work area; may be set open at three positions from 250 to 530 mm.