1179 Results for: "Hanna"

Supplier: Hanna

Potassium chloride 3.5 mol/l (3.5 N) in aqueous solution

Supplier: Hanna

This thin, lightweight tablet is designed to measure pH, conductivity (EC/TDS/NaCl/°C) and dissolved oxygen through advanced digital electrodes (only one electrode (parameter) can be connected at any time). The meter is portable and can be placed on a bench or mounted to a wall using the cradle with built-in power connection. The device can also be charged from a car cigarette lighter (adapter is required, not included), allowing even more mobility. When fully charged, the battery runtime is between 10 and 12 H. Standard mode:

Supplier: Hanna

This bench top conductivity meter is a multi-range meter with built-in automatic temperature compensation for testing conductivity.

Supplier: Hanna

These water resistant conductivity or TDS meters are ideal for accurate, affordable process monitoring with low maintenance.

Supplier: Hanna

Software, Windows®

Supplier: Hanna

ORP electrode HI 3230B; range ±2000 mV, 20...40 °C, Plastic, Diaphr.: Ceramic, BNC, 1 m cable

Supplier: Hanna

The HI-7631/2 conductivity/TDS sensor has a ½" thread and is ideal for use with the HI-983304 and HI-983305 Gro'chek and Pronto series. This is an amperometric probe, provided with built-in temperature sensor for automatic compensation, 2 m cable and a PEI (PolyEther-Imide) protective sleeve, which resists most aggressive chemicals.

Supplier: Hanna

The Surface K-Type Thermocouple Probe with Handle - HI766B is designed to measure the temperature of solid, high-temperature surfaces that may be difficult to measure.

Supplier: Hanna

HI8014 is a rugged, handheld pH/ORP meter specifically designed with ease of use in mind. The affordable meter is ideal for education and field applications.

Supplier: Hanna

This gas sensor is a combination electrode that detects dissolved gases in a solution. Ideal for the determination of carbonates as CO₂ in water, soft drinks and wine samples.

Supplier: Hanna

A microprocessor-controlled precision instrument with membrane covered polarographic sensor.

Supplier: Hanna

The HI 991002 meter features a large multi level LCD screen which displays both pH/ORP and temperature readings simultaneously.

Supplier: Hanna

This storage solution is supplied in an FDA compliant bottle. It is prepared with reagent grade chemicals that can be used to ensure optimum performance of pH and ORP electrodes.

Supplier: Hanna

The HI 765 penetration thermistor probes are provided with a PTC thermistor sensor. The HI 765 series can be identified by the white cap on the top of the handle. They are suitable for measuring liquids, air and gases, and for penetration in semi-solids.

Supplier: Hanna

Thermometer probe, Penetration, −50…+150 °C, Ø×L: 3×100 mm

Supplier: Hanna

Ink cartridge for printer, For: Hanna HI 123

Supplier: Hanna

Accessory for turbidity meter, Round glass cuvettes, For: HI-93703

Supplier: Hanna

Turbidity Standard, Turbidity calibration solution, produced according to the AMCO AEPA-1 standards, 10 FTU, Type: Polymer suspension

Supplier: Hanna

This high-performance digital thermometer is designed for Laboratory and field use. It is a thermistor thermometer that can be fitted with an optional rubber holster for use outdoors. Current temperature is simultaneously shown along with the highest and Lowest values since switch on.

Supplier: Hanna

The HI 93532 features two K-type connectors. It displays current temperature, high and low values in each channel. The CAL button allows to perform a one point calibration in an ice bath at 0 °C when probe interchange occurs.

Supplier: Hanna

The HI-93728-01 and HI-93728-03 nitrate reagents are suitable for use with the HI-96728 portable photometer and the HI-83200-02 and HI-83099-02 multiparameter bench photometers.

Supplier: Hanna

pH meter, Spare DO probe HI 769828-2

Supplier: Hanna

Hanna pocket checkers offer a cost-effective digital alternative to visual chemical test kits. Ideal for regular water testing, swimming pool testing and for aquaculture hobbyists.

Supplier: Hanna

The HI 96101 multiparameter photometer is used to measure Bromine, Free and Total Chlorine, Cyanuric Acid, Iron, Iodine and pH content in water and wastewater samples. The reagents are in powder and liquid form depending on the parameter.

Supplier: Hanna

Generally, ground and surface water contains no more than 1 mg/L (ppm) iron; but due to mining and industrial drainage, higher levels of iron have been observed. In domestic water, for instance, iron can unpleasantly alter the taste, stain laundry, damage kitchenware and favor the growth of certain bacteria. Iron is also an indicator of ongoing corrosion in industrial plants or in water cooling and heating systems. Moreover, iron is normally monitored in mining wastewater to avoid contamination.

Supplier: Hanna

CAL Check™ Standard for Nitrite (high range) 0,0 and 75 ppm, CAL Check™, : N/A

Supplier: Hanna

The HI4102 bromide-selective electrode is used for the determination of free bromide ions in emulsified food products, beverages, plants, soils and as an indicator for titration.

Supplier: Hanna

Compact, easy to use all-in-one pH meters, ideal for teaching.

Supplier: Hanna

The HI4101 ammonia-selective electrode is used for detecting gases that have been dissolved in a solution. The detection element is separated from the test solution by a gas permeable membrane.

Supplier: Hanna

This reliable and easy to use meter comes with pre-amplified pH electrode and internal temperature sensor. This instrument is ideal for applications that require a custom calibration point. Manual calibration can be extremely useful in order to achieve better accuracy.