6649 Results for: "GREINER+GASSNER&pageNo=29"

Supplier: BURKLE

The magnetic centrifugal pumps are suitable for transferring acids, alkalis, alkaline and electroplating baths, photography chemicals as well radioactive, sterile and highly corrosive liquids. The drive, via contact-free magnetic force transfer, requires no dynamic shaft seals and this makes a hermetically sealed pump housing possible, which means that it cannot leak.

Supplier: Aesculap

Dissecting needle, Aesculap®, Surgical needles, Fig. 3, round body, 0,8 mm, 29 mm

Supplier: Cytiva

Vertical gel electrophoresis system, accessory, Comb, PTFE, 15-wells, 1,0 mm thickness, 2,9 mm width, sample volume 2,9 μl per 1 mm depth

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass 3.3, clear.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass.

Supplier: SEMADENI

For: Container PS 15 ml, Colour: Natural, HDPE, Colour: Transparent, HDPE, Ø: 29 mm

Supplier: VWR Collection

PTFE, 0,05 mm thick.

Supplier: VWR Collection

Borosilicate 3.3 glass.

Supplier: SciLabware

These PE stoppers are ideally suited for use with glass or plastic volumetric flasks and measuring cylinders etc. which have longer 'B' length sockets.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

* Multiple sample starter set consists of a 152 mm platform, a foam insert for 60 microtubes and a foam insert for one standard microplate
** Large sample set is ideal for mixing beakers, flasks and large tubes. The set consists of a recessed platform, two elastic bands, a blank foam insert, a foam insert for 4×29 to 37 mm tubes, a foam insert for 8×14 to 29 mm tubes and a foam insert for 12×9 to 16 mm tubes
*** Small ampoule/tube attachment enables vigorous end-to-end mixing for up to four 15 to 17 mm Ø tubes or ampoules
**** Large ampoule/tube attachment enables vigorous end-to-end mixing for up to four 10 to 17 mm Ø tubes or ampoules.

Supplier: DWK Life Sciences

Burette, Capacity: 2000 ml, Reservoir bottle, amber, neck with NS 29/32 joint, 2000 ml

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass, clear.

Supplier: Sampling Systems

Accessory for solid sampler, Sample insert, stainless steel, 2,9 ml, For: U-D Master

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, Borosilicate glass.

Supplier: KARTELL

Bellow connector, PTFE, for use as a flexible or elastic connector to prevent pressure and stresses, and to dampen vibrations in standard ground joints.

Supplier: TECHNICAL QUARTZ SOLUTIONS

Quartz, transparent, glazed.

Supplier: Bohlender

For closing ground joint parts. With ground joint and sealing rings on the outside; knurled or hexagonal grip. Compared with glass stoppers, they are easily removable and can be used without grease.

Supplier: BURKLE

Stopper made of PE, hollow with sealing rings and octagonal top.

Supplier: BANDELIN-ELECTRONIC

Sleeve adapter, NA 29 G, PTFE, For: HD 2070/2200/3100/3200

Supplier: Cole Parmer

PP adapter, cone, GL32 thread, 24/29 bottle thread, stuart®

Supplier: BEHR

HCL 29, HCL absorber for driving off chloride, For: COD digestion workstations

Supplier: Thermo Fisher Scientific

These crucibles are manufactured from zirconium. Available in low form and straight wall types.

Supplier: Bohlender

b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.

Supplier: Merck

Vial insert, 0,20 ml, PP, Ø×H: 6×29 mm, Conical bottom, Non sterile, Cap included: No

Supplier: VITLAB

Stopper for Standard Ground Joints, PP, square-knob cap, NS: 29/32, White/red

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass, clear.

Supplier: Hettich

Centrifuge, Benchtop, Adapter for 1×50 ml conical tube (29×107 mm)

Supplier: VWR Collection

PTFE, with grip.

Supplier: THERMO NATIONAL SCIENTIFIC

Vial insert, 0,20 ml, Glass, Ø×H: 5×29 mm, Conical bottom, Non sterile, Cap included: No