4800 Results for: "Cyclopropyl+methyl+ketone&pageNo=57&view=list"

Supplier: VELP SCIENTIFIC

These BOD incubators have been designed to keep any product at a constant temperature, where accurate and precise temperature control is required. For applications where monitoring the sample is extremely important, the I models are ideal. The controlled heating and cooling thermoregulation system enables the user to select an operating temperature between 3 and 50 °C. The E models have wireless connection for TEMPSoft™. The I models have an internal transparent door and wireless connection for TEMPSoft™ and an auto tuning system which provides constant control of the internal temperature, by continuously comparing the detected and set values and aligning them via a precise and rapid adjustment system. All models have two internal sockets.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Pyramid is an octadecyl modified silica phase with polar endcapping, especially designed for use in eluent systems of up to 100% water.

Supplier: DUPERTHAL

Safety cabinets with storage shelves (CLASSIC line standard) or pull-out shelves (CLASSIC line pro) for the storage of hazardous substances in working spaces. Complete carcass, interior fittings and wing doors are made of powder-coated sheet steel.

Supplier: Simport Scientific

This model has a special hinge that holds the base and the cover together. The hinge design allows the cassette to be opened and closed as often as required. It is a front-opening cassette with a 45° smooth writing surface.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: KEYSTONE CLEANROOM PRODUCTS

Save time and standardise activities in equipment preparation for steam sterilisation; or use in any pharmaceutical manufacturing setting to keep cleaned equipment protected from contamination.

Supplier: Brady

The B-494 polyester label is a reliable sample identification and traceability solution.

Supplier: Ahlstrom-Munksjö

Ahlstrom-Munksjö manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, deionised water and are further treated with dilute acid to remove any remaining organic and inorganic impurities. All quantitative grades are manufactured in a strictly controlled environment that ensures high uniformity and high purity from filter to filter.

Supplier: Restek

These Ultra Aromax is a unique reversed-phase material that exhibits extreme retention and selectivity for aromatic and/or unsaturated compounds. They are made of high-purity, type-B silica that minimises activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Pinnacle® DB Phenyl columns offer alternate selectivity to straight chain hydrocarbon phases, especially for aromatic analytes. Replaces Hypersil® BDS Phenyl and Pinnacle® Phenyl Amine.

Supplier: Brady

PermaSleeve® PS heat-shrink polyolefin (B-342) wire marking sleeves combine speed, ease of use, and permanence to create long-lasting, high quality identification.

Supplier: S.C.A.T.

The SCAT SafetyWasteCaps provide maximum safety for your HPLC liquid disposal. Safely dispose of your liquid laboratory waste without contaminating the ambient air by using SafetyWasteCaps with integrated exhaust air filters. These high-performance filters regulate the air pressure balance and prevent the escape of vapors due to the resulting overpressure in the disposal container. The variety of closures, connections and thread sizes allows optimal adaptation to your HPLC situation. Additional versions with grounding connections, level controls or safety funnels or offer every convenience for safe disposal.

Supplier: Avantor Fluid Handling

Make the most of your Masterflex flowmeters with these replacement parts and other accessories.

Supplier: Restek

Viva C18 are monomeric octadecylsilane columns, highly base deactivated wide pore packing that exhibits peak shape for a wide range of compounds from acidic through slightly basic. General purpose column for analyzing large molecules and biomolecules.

Supplier: RAININ

These thin-wall tips are designed to fit RAININ and Pipetman pipettes with conical shafts, Eppendorf and Labsystems pipettes. Some tips feature a hydrophobic filter which forms a barrier against aerosols and liquids eliminating potential sample and pipette cross contamination.

Supplier: Thermo Fisher Scientific

White PC, autoclavable.

Supplier: TEKNOMEK

Fully welded stainless steel tables are a very versatile work surface, intelligently designed to remove potential trap points. Features include diamond braces - at 300 mm from the ground they aid ease of cleaning. Choose between diamond centre tie or rear tie bar or undershelf to suit your needs.

Supplier: Restek

General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g. Aroclor mixes), essential oils, semivolatiles. Column specifically tested for low-bleed performance.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: Thermo Fisher Scientific

Recommended for analytes with medium hydrophobicity or when a less hydrophobic phase is required to obtain optimum retention.

Supplier: VWR Collection

Weights made from anti-magnetic, polished stainless steel. Suitable for medium resolution precision electronic balances. Weights have adjustment cavities for weights of more than 20 g.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Cyano bonding. Suitable for analyses of a wide range of compounds, from acidic through slightly basic. Also useful for confirmation of analyses on a C18 or C8 column. Can be used in normal phase or reversed phase mode of separation.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C8 bonding. Similar to Pinnacle® DB C18, but the shorter alkyl chain provides less hydrophobic retention. Less retention can be useful for shortening analysis time, if resolution is adequate. Replaces Hypersil® BDS C8 and Pinnacle® C8 Amine.

Supplier: Thermo Fisher Scientific

These ODS columns are suitable for non-polar and moderately polar analytes including acids, neutrals and lipophilic compounds. All column phases are endcapped.

Supplier: Restek

Ultra C8 is a conventional monomeric octylsilane column offering a shorter alkyl chain to provide less hydrophobic retention and improved basic peak shape. It is made of high-purity, type-B silica that minimises activity and creates high-density bonding. These columns are designed for selective and reliable HPLC applications.

Supplier: Restek

Highly base-deactivated spherical silica manufactured by Restek. Monomeric C18 bonding. Hydrophobic C18 phase suitable for analyses of a wide range of compounds, from acidic through slightly basic. Replaces Hypersil® BDS C18 and Pinnacle® ODS Amine.

Supplier: Bohlender

Screw cap and clamping ring made from PPS, sealing ring and tapered ring (ferrule) made from PTFE.

Supplier: VWR Collection

Water-resistant/shockproof thermometer (IP 64) replaces hazardous mercury units and is ideal for wet labs, wash-down areas, outdoors and virtually all field applications.

Supplier: VARIAN

The PLRP-S media, rigid poly(styrene/divinylbenzene) particles, are available in a range of pore sizes for small molecule, synthetic biomolecule and macromolecule purification. Their thermal and chemical stability makes them ideal for purifications that require extreme conditions for sample preparation, compound elution and column regeneration

Supplier: Abeba

ESD shoe made from smooth or perforated leather with non foldable, adjustable heel strap and a rubber sole (resistant to fuels, oils, acids and bases).