4801 Results for: "Cork+Stoppers&pageNo=57&view=easy"

Supplier: Avantor Fluid Handling

Read measurements in an unobstructed 360° view.

Supplier: Brand

PTFE, strong walled.

Supplier: DWK Life Sciences

For storage of reagents and standards. Excellent for small derivatisation reactions. Wheaton 33® low extractable borosilicate glass is ideal for research studies where stability of glass is of prime importance.

Supplier: Amarell

These models are suitable for government testing or official calibration.

Supplier: BOETTGER PAUL

PP, transparent.

Supplier: ESCHENBACH OPTIK

Magnifying spectacles for near viewing.

Supplier: DWK Life Sciences

These serum vials are ideally suited for the handling, containment, and storage of a variety of liquids, including reagents, vaccines, blood plasma, culture media, chromatography samples.

Supplier: KARTELL

PTFE, white.

Supplier: SciLabware

PYREX®, borosilicate glass, clear, with black phenolic screw caps with PTFE faced liner.

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable Pt100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is absolutely ideal. The SF models are equipped with single display.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: VWR Collection

These thermometers for wet areas can be used for the monitoring of Liquids, air/gas, or semi-solids in freezers, water baths, outdoor tanks, incubators and refrigerators. At the touch of a button, the memory recalls highest and Lowest temperature readings over any time period. Reading updates every second. Unit is engineered to be shockproof in drop tests up to 1,5 metres.

Supplier: SOEHNGEN

These blue, detectable plasters are specially designed for use in the food industry. Dispenser containing aluminium strips with an integrated metal surface that can be detected via a metal detector.

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: JULABO GmbH

PRESTO® systems cover a working temperature range of −93 to +250 °C with high cooling and heating capacity. These instruments can compensate for exothermic and endothermic reactions with extraordinary speed, they feature high flow rates, constant pressure and a controlled build-up of pump pressure. Changes in the temperature control of liquid viscosity are balanced dynamically. Permanent internal monitoring and self-lubricating pumps contribute to long service life. The integrated touch panel gives the user a clear view of important information. Fingertip control via the touch screen. Multiple interfaces enable remote control of the PRESTO® across networks and in super-ordinated control systems. Wireless remote control of the new PRESTO® can easily be done by using the Wireless TEMP range of products.

Supplier: Bel-Art Products, a Part of SP

These seamless, rotational-moulded PE tanks are lightweight and easy-to-handle.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: HAMILTON BONADUZ

The Microlab® 600 dual syringe diluter is a semi-automated liquid handling instrument capable of dilutions up to 1:50000 in a single step. The precision stepper motors provide exceptional positional accuracy across the range of Hamilton bubble-free prime (BFP) syringes from 10 µl to 50 ml volumes. The inert fluid path and the diluent washing of the the tubing between each sample, minimises carry-over for even the most sensitive techniques. The basic controller features a quick start and run screen for priming and programming the diluent and sample volumes, and the controller also displays the graphic pump status with animations of the fluid path and pump status.

Supplier: US Biological

Anti-MACOI Rabbit Polyclonal Antibody (Biotin)

Supplier: VWR Collection

View time, temperature, and humidity from anywhere.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: CONTEC

Sealed knitted polyester swabs for surface cleaning validation.

Supplier: SciLabware

PYREX®, borosilicate glass, clear.

Supplier: NEW PIG

One easy step for safer acid or caustic cleanup.

Supplier: SciLabware

PYREX®, borosilicate glass.

Supplier: DELTALAB

Container PP, natural or blue, with PE screw cap.

Supplier: Avantor Fluid Handling

Easily mount flowmeters on tripod for easy viewing.

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is ideal.

Supplier: Avantor Fluid Handling

Easily view flow through clear plastic lens.