1200 Results for: "Cole-Parmer"

Supplier: Cole-Parmer

Quickly concentrate multiple samples in a block at once.

Supplier: Cole-Parmer

Slide drying bench

Supplier: Cole-Parmer

Extensive range of cuvettes for spectrophotometry for measuring liquids.

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, bulb, pH: 0 - 14, 0...+80 °C, Glass, Diaphr.: Ceramic frit, Electrolyte: 4M KCl (refillable), Ø×L: 12×120 mm, BNC, 1 m cable, For: Oils, biofuels, non aqueous samples, Tris buffers

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: Cole-Parmer

Printer PR2000 for use with IA9000 series

Supplier: Cole-Parmer

Made from anodised aluminium, blocks have a separate hole to accommodate a thermometer if required.

Supplier: Cole-Parmer

The Techne® Dri-Blocks® are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration and enzyme analysis. There is a choice of temperature ranges; 25 to 100 °C or 25 to 200 °C. These models have a rotary knob for temperature setting (but no digital display).

Supplier: Cole-Parmer

"Clip On" Tempunit® thermoregulator designed to be used with Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits. Units have a rugged splashproof case, a powerful pressure pump and external circulation fittings.

Supplier: Cole-Parmer

Run multiple reactions in a single station, saving time and money.

Supplier: Cole-Parmer

These plates are made from PP.

Supplier: Cole-Parmer

The SB range of fluidised baths offers a safer alternative to the dangers associated with high temperature oil and salt baths. These units are designed to be bench or floor standing and only require an electrical and air supply for operation. Air passes through the mass of the aluminium oxide (Alundum) particles via a porous plate in the base of the unit separating the individual particles and suspending them in free air, giving the properties of a liquid bath.

Supplier: Cole-Parmer

Fully specified dissolved oxygen meter from Jenway that includes full support for the B.O.D 5-day test protocol. Remote monitoring and data collection are facilitated by the provision of both analogue and digital outputs and in the event of power removal all user-defined parameters are retained.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: Cole-Parmer

Provide clean and easy operation.

Supplier: Cole-Parmer

Choose a heater, then blocks to suit your application needs!

Supplier: Cole-Parmer

Corrosion resistant baths with stainless steel inners for easy cleaning.

Supplier: Cole-Parmer

Accessories for flame photometers, For: PFP7 and PFP7/C, Sodium filter

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: Cole-Parmer

Diode array technology speeds up spectral data acquisition.

Supplier: Cole-Parmer

Single place percentage on/off temperature controller.

Supplier: Cole-Parmer

These Electrothermal microprocessor controlled melting point apparatuses allow quick and reliable testing of chemical samples. An adjustable extension arm facilitates comfortable viewing and helps reduce operator fatigue. The viewing head can be rotated for easier viewing and folds flat for easy and compact storage. Safety eyepiece reduces glare and protects your eyes from contact with the hot zone. Three audible beeps indicate when oven temperature has stabilised. Simple push-button controls are conveniently located. Heating chamber consists of aluminium heating block. RS232 output connector allows interface with the PR2000B printer or computer. Units can be calibrated in the field or can be sent back to the manufacturer for calibration.

Supplier: Cole-Parmer

This regulator controls the average energy input to a heating apparatus by automatically switching power on and off at the intervals regulated by the MC227. The temperature of the apparatus being regulated remains constant.

Supplier: Cole-Parmer

UV/Visible spectrophotometer, Genova

Supplier: Cole-Parmer

Culture flasks, borosilicate glass, siliconised, for use with the MCS platform biological stirrers, ideal for suspension cell culturing with reduced cell attachment.

Supplier: Cole-Parmer

Techne® Dip Coolers are designed for use with Techne liquid baths when temperatures down to –35 °C are required. The cooling head of the Dip Cooler fits neatly and unobtrusively into the corner of the bath and can be secured with a specially designed mounting bracket (supplied). If cooling can be achieved by using cold tap water, a dip cooler is recommended as it conserves water and is easier and more convenient to use.

Supplier: Cole-Parmer

Cells for conductivity measurement.

Supplier: Cole-Parmer

Interchangeable heating blocks offer excellent thermal conductivity.

Supplier: Cole-Parmer

Conductivity cells with built-in ATCs for use with Jenway portable conductivity meter (model 470) and/or Jenway bench conductivity meter (model 4510 and 4520).

Supplier: Cole-Parmer

This UV/vis spectrophotometer offers 5 nm spectral bandwidth, simple photometrics, concentration, multi-wavelength, spectrum scanning, kinetics, to monitor the change in absorbance over time.