447 Results for: "CONTEC"

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: CONTEC

VertiKlean® MAX™ is designed for applying disinfectants to both horizontal and vertical surfaces and is ideal for general cleaning of ceilings, walls and floors. This lightweight mop features a single layer of hydrophilic polyurethane foam laminated to polyester microfibre fabric backed with a semi-rigid thermoformed plate, which easily snaps onto a VertiKlean® mop head frame.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

QuickTask™ mopping system. The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfibre/foam and microfibre flat mop heads that are easily installed onto a hinged mop head frame and QuickConnect interchangeable handle. QuickTask™ mop head frames are available in stainless steel or durable, autoclavable polypropylene.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

These lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.

Supplier: CONTEC

EasyReach™ is recommended for effective cleaning and disinfection of surfaces of separative devices such as: Isolators, restricted access barrier systems (RABS), laminar airflow hoods, bio safety cabinets, glove boxes, incubators and clean air hoods.

Supplier: CONTEC

Ideal for wiping exterior surfaces of products and cleaning interior surfaces of process tools or other equipment. Made from 100% textured polyester no-run knit.

Supplier: CONTEC

These hydrophilic polyurethane foam wipes are engineered for use in cleanroom and other critical applications. They combine high absorbency with extremely low levels of extractable residue and particles.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

Contec ProChlor is a fast acting innovative sporicidal biocide designed for use in pharmaceutical cleanrooms. A blend of hypochlorous acid in purified water. Ready-to-use format.

Supplier: CONTEC

The SATWipes are made of pure non woven polyester that is hydraulically entangled creating a soft, durable and clean wipe. The saturation of either alcohol/deionised water or 100% alcohol provides a safe and mild cleaning solution.

Supplier: CONTEC

This static-safe swab consists of a pointed-tip sealed foam head attached to a conductive polymer handle.

Supplier: CONTEC

These PROSAT® Sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% denatured ethanol and 30% purified water.

Supplier: CONTEC

Contec Sterile Denatured Ethanol is a blend of 70% v/v denatured ethanol with 30% water for injection or purified water. Contec’s ethanol is only denatured with IPA creating a very low residue product.

Supplier: CONTEC

SC-2 double-ended round cotton swabs consist of high-quality, long staple-length cotton, tightly wrapped and shaped on both ends of high strength, wound paper handles.

Supplier: CONTEC

These wipes are made of 100% knitted polyester pre-saturated with 100% semiconductor grade Isopropyl Alcohol (IPA).

Supplier: CONTEC

Stainless steel cart with two buckets and downpress wringer.

Supplier: CONTEC

CONSTIX® SF-11 swabs consist of a foam head formed over the end of a 152 mm cotton-tipped applicator with wood handle. The foam head is an 100ppi sealed closed-cell polyurethane foam.

Supplier: CONTEC

Designed for wet mopping in controlled environments and cleanrooms for effective cleaning and retrieval of excess fluid. Ideal for use in sterile environments. Mop heads are constructed from a continuous tube of 100% polyester knitted fabric, looped to form strands that encapsulate liquids for maximum absorption.

Supplier: CONTEC

These non pyrogenic LE wipes are the first sterile non woven wiping products designed for the pharmaceutical, medical device and biotech industries. Made with Sontara® lyocell/polyester blend fabric, these low endotoxin wipes have excellent sorbency and are packaged, gamma sterilised and validated sterile to a 10⁻⁶
Sterility Assurance Level.

Supplier: CONTEC

Dry wipes designed for durability and ease of use that are ideal for cage and equipment wipe down or downtime 'super cleaning'.

Supplier: CONTEC

Polywipe-C Wipes are made from a standardweight 100% knitted polyester that is knife cut to create a soft edge.

Supplier: CONTEC

Cleaning swabs, sealed, CONSTIX® SP-10N

Supplier: CONTEC

Cleaning swabs, sealed, CONSTIX® SP-11