443 Results for: "CONTEC"

Supplier: CONTEC

This standard weight wipe with textured surface is knitted from filament polyester. It is ideal for effective cleaning.

Supplier: CONTEC

Quiltec I wipes offer the highest sorptive capacity of any sealed edge wipe available. They are manufactured using two layers of knitted polyester fabric that are laminated together to form a stronger, more adsorbent wipe.

Supplier: CONTEC

Contec HydroPure is a blend of 6% stabilised hydrogen peroxide and water for injection (WFI) or purified water. Contec HydroPure is BPR authorised at EU level and is efficacious against bacteria, fungi, moulds and yeasts.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This sealed foam swab consists of a polyurethane foam bonded to a flex-tip PP handle.

Supplier: CONTEC

Neutral detergent with purified water. NeutraKlean is a gentle and low-foaming detergent designed for the cleaning of life science cleanrooms.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges.

Supplier: CONTEC

Presaturated wipes can offer many benefits over bottled alcohol and dry wipes for cleanroom use. Contec’s sterile SATWIPES Theta with 70% denatured ethanol consist of a perforated roll of presaturated wipes which are dispensed through a convenient centre pull canister.

Supplier: CONTEC

QuickTask™ mopping system. The QuickTask™ product line consists of a variety of knitted polyester, polyester/cellulose, microfibre/foam and microfibre flat mop heads that are easily installed onto a hinged mop head frame and QuickConnect interchangeable handle. QuickTask™ mop head frames are available in stainless steel or durable, autoclavable polypropylene.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

These lightweight, polyester disposable mops are excellent for applying disinfectants and for wet cleaning of vertical surfaces, ceilings, and walls in controlled environments. Ideal for reaching awkward corners and ceilings with a complete range of motion.

Supplier: CONTEC

Consisting of 70% v/v Isopropanol blended with highly purified water, this ready to use formulation eliminates mixing and filtration. Used for disinfecting gloved hands and also as a surface disinfectant, particularly when used in conjunction with Contec® wipes.

Supplier: CONTEC

Contec® ProChlor is a ready to use sporicidal biocide based on stabilised hypochlorous acid with purified water and is specifically designed for cleanroom environments.

Supplier: CONTEC

Non woven, hydroentangled polyester/cellulose blend. Ideal for wipe down of products prior to their introduction to the cleanroom.

Supplier: CONTEC

Two layers of knitted polyester fabric are laminated together, resulting in a durable wipe with more than twice the absorbent capacity of the individual layers.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

Made of 100% synthetic fibre and formed using the spunlacing process, this wipe - designed for cleaning delicate optical products such as lenses and mirrors - is exceptionally clean and durable. It has excellent chemical resistance and is therefore ideal for use with solvents. Its open fibre structure provides excellent sorptive capacity.

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These meltblown PP wipes are saturated with a 70% isopropyl alcohol/30% deionised water blend and are sterilised by gamma irradiation.

Supplier: CONTEC

Non woven cellulose/polyester hydroentangled wipes made from 55% cellulose and 45% polyester, highly sorbent with excellent durability and good cleanliness.

Supplier: CONTEC

Mop heads are constructed from a two-ply quilted 100% polyester on the outer face with a synthetic fibrefill core.

Supplier: CONTEC

This wipe is made of a special grade blue cellulose and polyester, featuring improved cleanliness and excellent sorbency.

Supplier: CONTEC

Pre-saturated knitted polyester wipes made with Polynit Heatseal material. The wipes are pre-saturated with 70% IPA and 30% DI Water. They are therefore ideal for cleanroom applications, surface preparation and critical manufacturing processes.

Supplier: CONTEC

VertiKlean® MAX™ is designed for applying disinfectants to both horizontal and vertical surfaces and is ideal for general cleaning of ceilings, walls and floors. This lightweight mop features a single layer of hydrophilic polyurethane foam laminated to polyester microfibre fabric backed with a semi-rigid thermoformed plate, which easily snaps onto a VertiKlean® mop head frame.

Supplier: CONTEC

Contec® Sterile IPA is a blend of 70% v/v Isopropanol with 30% water for injection or purified water, this ready to use formulation eliminates mixing, filtration, processing and QC expense of in-house production. Used for wiping gloved hands and also as surface cleaner for removal of contaminants particularly when used in conjunction with Contec® sterile wipes.