5106 Results for: "3,3-Dimethylbutyric+acid&pageNo=31"

Supplier: FRISTADS KANSAS

Bi-coloured overalls made of 65% polyester and 35% cotton, with contrast stitching.

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimised to provide the most consistent results with less extractables.

Supplier: Avantor

Avantor® ACE® C18-300 columns provide great reproducibility and column lifetime. These stainless steel columns are available in a wide range of particle sizes and dimensions from capillary to preparative. These columns are designed for a wide range of chromatographic applications, to provide great performance with acidic, basic and neutral molecules.

Supplier: FRISTADS KANSAS

Durable trousers made of 65% polyester and 35% cotton.

Supplier: FRISTADS KANSAS

Two-colour working trousers with contrast stitching, made of 65% polyester and 35% cotton.

Supplier: RENTEX

Work jacket made from blended fabric, 65% polyester and 35% cotton, with Sanfor®.

Supplier: Sartorius

Binder free glass microfibre filters are made of 100% borosilicate, are highly pure and extremely white. They are recommended for analytical and gravimetric analyses and also as prefilters. These filters combine fast flow rates with high load capacity and the retention of very fine particles.

Supplier: CHIRAL TECHNOLOGIES

These columns allow chromatographers to employ essentially any organic solvent as mobile phase to develop methods for the most challenging separations. These columns are available in a variety of particle sizes and offer great speed and column resolving power. Columns packed with 3 µm CSPs offer high speed separations and a reduction in analysis time and cost per sample. Columns, packed with 3 µm particles, may be used in conventional HPLC units without significant loss in performance, even with the smaller column dimensions.

Supplier: ProSci Inc.

Galectin-3(LGALS3) is also known as Galactose-specific lectin 3, Mac-2 antigen, Carbohydrate-binding protein 35, Laminin-binding protein and Galactoside-binding protein. LGALS3 is highly expressed in early stages of papillary carcinoma, and lowly during tumor progression. LGALS3 is probably forms homo- or heterodimers and secreted by a non-classical secretory pathway and associates with the cell surface. LGALS3 plays an important role during the acquisition of vasculogenic mimicry and angiogenic properties. LGLAS3 takes part in an immune regulator to inhibit T-cell immune responses and promote tumor growth, as a result providing a new mechanism for tumor immune tolerance.

Supplier: Avantor

Vydac TP was the first range of wide pore media phases developed in the Vydac range and became the industry standard for peptide and protein separations. The large pores of the 300 Å TP silica give polypeptide molecules complete access to the interior of the silica pores.

Supplier: VWR Collection

These leakproof, conical bottom centrifuge tubes prevent breakage and leakage during high speed centrifugation, and are made of non cytotoxic, medical grade resin that allows users to easily see sample volume and colour.

Supplier: VWR Chemicals

These ISO 17025 and ISO 17034 certified general purpose viscosity standards provide certified kinematic viscosity, dynamic viscosity and density data across temperature ranges from 20 to 100 °C.

Supplier: VWR Collection

ND11 crimp neck vials are manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of aluminium seal styles and septa materials.

Supplier: Merck

Ideal for sterilising tissue culture media, buffers, or other aqueous solutions. The no tip, tapered receiver flask and compact profile of the Stericup® design improve stability and make gripping the receiver easier.

Supplier: Brady

PermaSleeve® PS Heat-Shrink Polyolefin (B-342) wire marking sleeves combine speed, ease of use, and permanence to create long-lasting, high-quality identification.

Supplier: HELLMA

Hellma® high precision quartz glass semi-micro cells for absorption measurements in the UV/Vis range, 10 to 50 mm path length, with lid.

Supplier: HELLMA

Hellma® large cells for special applications in the Vis range, 10 to 50 mm path length, with or without lid.

Supplier: TRENKA

This exclusive fine piqué polo shirt is made from 100% ring-spun combed cotton. The gray model is made from 90% preshrunk ring-spun combed cotton and 10% viscose.

Supplier: FRISTADS KANSAS

Tubular knit T-shirts made from 100% ring-spun cotton (single jersey). The grey melange shirt is made from 85% cotton and 15% viscose, while the yellow version is made from 65% polyester and 35% cotton.

Supplier: FRISTADS KANSAS

Gilets made from 65% polyester and 35% cotton; napped inner.

Supplier: FRISTADS KANSAS

Dirt-, oil- and water-repellent trousers made of Polydex® material (100% polyester), with quilted lining.

Supplier: FRISTADS KANSAS

Short trousers made of 65% polyester and 35% cotton, with soft nap on reverse side.

Supplier: Corning

PP translucent or PS clear, with PE screw cap. Straight walled vessels for sample collection, storage and transport. Twist closure for quick opening and closing, with leakproof inner lip. PS offers good thermal and chemical resistance. PP offers excellent thermal and chemical resistance.

Supplier: RENTEX

Work jacket made from blended fabric, 65% polyester and 35% cotton, pre-shrunk.

Supplier: FRISTADS KANSAS

Two-tone shorts with contrasting seams, made from 65% polyester and 35% cotton. Ideal for craftsmen and light industries.

Supplier: LEICA MICROSYSTEMS

The objective lens is a critical part of the microscope optics. The microscope objective is positioned near the sample, specimen, or object being observed. It has a very important role in imaging, as it forms the first magnified image of the sample.

Supplier: Brady

PermaSleeve® PS heat-shrink polyolefin (B-342) wire marking sleeves combine speed, ease of use, and permanence to create long-lasting, high-quality identification.

Supplier: Brady

B-417 high-adhesion self-laminating vinyl wraps are designed for tough conditions, including high-humidity environments, small diameter wires, and newer wire jacketing materials.

Supplier: FRISTADS KANSAS

Gilets made from 65% polyester and 35% cotton; napped inner.

Supplier: HAMILTON BONADUZ

PRP-1 polymeric HPLC columns are designed for broad ranging uses, similar to C8 or C18 HPLC materials. They combine the best characteristics of silica-based and polymeric columns resulting in highly inert and long-lasting columns. These columns are ideal for applications that require a high degree of column to column and batch to batch consistency (quality assurance, clinical trials). Unlike C8 or C18 columns, PRP-1 has no stationary phase coating. Since there is no stationary phase to hydrolyse, the column maintains its performance characteristics longer than many C8 or C18 columns.