FreeZone® Triad™ Freeze drying system

The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

• Microprocessor controlled temperature programming from −55 to +50 °C during ramping and holding and −75 °C during pre-freezing
• Alarm indicator for temperature and vacuum
• ¹/₃ hp refrigeration systems cool to −85 °C for processing samples with low eutectic points
• A hot gas defrost is also included with switch and automatic shut off when refrigerant reaches 65 °C or after 3 hours
• Stainless steel condensate pan with drain hose

The Triad™ includes a pneumatic stoppering mechanism that inflates the diaphragm and lowers the stoppering tray above the shelf. No compressed gas is required.

 : Model requires: Vacuum pump with a displacement of at least 144 litres per minute,  0,002 mBar ultimate pressure, reverse IEC plug, and fitting suitable for ³/₄" I.Ø vacuum hose and freeze dry glassware, if not bulk freeze drying, which are not supplied with the dryer. Please order these separately. Please contact Avantor for further details.