You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Flangeless fingertight nuts
Supplier: VICI JOUR RESEARCH
PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.
Expand 2 Items
Quick connect Luer adapters, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).
Expand 24 Items
Hose connector, WHEATON®
Supplier: DWK Life Sciences
Hose connector, 13-425
Expand 1 Items
Tubing connectors, Y-shaped, POM
Supplier: SEMADENI
Connectors, Y-shaped, made of POM, white.
Expand 2 Items
Tubing connectors
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, Connector, tubing, P-801 barbed connectors for use with 1/16” I.Ø tubing, PP
Expand 5 Items
Tubing connectors, straight, HDPE
Supplier: SEMADENI
Tubing connector, made of HDPE, with taper ends.
Expand 1 Items
Tubing connectors, T-shaped, POM
Supplier: SEMADENI
Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.
Expand 1 Items
Biocompatible mixing tee
Supplier: VICI JOUR RESEARCH
PEEK with titanium filter element.
Expand 1 Items
Two-piece fingertight fittings, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PEEK, stainless steel or PCTFE.
Expand 5 Items
Inverted cone fittings, Omni-Lok™
Supplier: OMNIFIT
Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.
Expand 18 Items
Low pressure tees and crosses, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
ETFE or PEEK.
Expand 15 Items
One-piece fingertight fittings
Supplier: VICI JOUR RESEARCH
PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).
Expand 3 Items
Flanged fingertight nuts
Supplier: VICI JOUR RESEARCH
Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.
Expand 3 Items
Adapters
Supplier: VICI JOUR RESEARCH
These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.
Expand 10 Items
Fittings, flanged, Omni-Lok™
Supplier: OMNIFIT
Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.
Expand 7 Items
VHP tees, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, UH-427 VHP tee for 1/16" OD tubing, 10-32 coned threads, 0,50 mm thru-hole, 0,57 µl swept volume, stainless steel, Stainless steel
Expand 4 Items
One-piece fittings, Super Flangeless™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.
Expand 1 Items
Luer-to-MicroTight® adapter, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.
Expand 1 Items
Tubing connectors, Y-shaped, PP
Supplier: SEMADENI
Connectors, Y- shaped, made of PP, natural color.
Expand 1 Items
Plugs and caps, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific®, P-116, plug for micro fittings, PEEK, Black
Expand 28 Items
Tubing couplings
Supplier: KLS Martin Group
Couplings, tubing, Faucet coupling for water jet pump 1/2", Thread: 12,7 mm
Expand 1 Items
High pressure fittings, for 360 µm tubing, Nanovolume™
Supplier: VICI JOUR RESEARCH
These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).
Expand 35 Items
Fingertight adapters, Color-Sleeve
Supplier: VICI JOUR RESEARCH
These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.
Expand 26 Items
Fittings, Super Flangeless™, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
These fittings eliminate loosening due to tubing twist.
Expand 17 Items
Fittings, MicroTight®, Upchurch Scientific®
Supplier: UPCHURCH SCIENTIFIC
Upchurch Scientific® MicroTight®, F-126S, fitting, standard micro knurl, PEEK red, 6-32 coned port, for 1/32" OD tubing, 5000 psi, PEEK
Expand 11 Items
Tees and crosses, stainless steel
Supplier: VICI JOUR RESEARCH
These stainless steel 316 tees and crosses are ideal for joining solvent lines.
Expand 5 Items
Nuts and ferrules for flangeless connections
Supplier: VICI JOUR RESEARCH
Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.