You searched for:

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: COWIE

T-type connectors, made of PTFE, bayonet type, for tubings.

Supplier: VACUUBRAND

Cross pieces with small flanges KF made of aluminium or stainless steel.

Supplier: Restek

These internal cross are made of stainless steel. Used to connect four lines. Ideal for 1,6 mm OD tubing.

Supplier: KARTELL

LDPE, transparent, unbreakable.

Supplier: KOHLER

Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: BURKLE

Magic box contains 68 connectors.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: UPCHURCH SCIENTIFIC

PEEK, stainless steel or PCTFE.

Supplier: Thermo Fisher Scientific

PP, translucent.

Supplier: SEMADENI

Connectors, Y-shaped, made of POM, white.

Supplier: Bel-Art Products, a Part of SP

Complete fitting assortment box with connectors for tubings.

Supplier: SEMADENI

Tubing connector, made of HDPE, with taper ends.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-700 VHP MicroTee for 1/32" OD tubing, 5/16-24 coned threads, 0,25 mm thru-hole, 84 nl swept volume, PEEK/stainless steel, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Connector, tubing, P-801 barbed connectors for use with 1/16” I.Ø tubing, PP

Supplier: Restek

These finger-tight capillary column nuts made from high-quality stainless steel are an alternative to conventional column nuts. These fittings work best with graphite type ferrules and help prevent over tightening, which can cause graphite material to exude into the inlet.

Supplier: Restek

Double connectors are used to effectively connect any click-on trap to a click-on indicator.

Supplier: Restek

EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: VICI JOUR RESEARCH

PEEK with titanium filter element.

Supplier: DWK Life Sciences

Hose connector, 13-425

Supplier: Bel-Art Products, a Part of SP

PP, translucent.

Supplier: SEMADENI

Connectors, T-piece, made of POM, white, strong design, temperature resistant up to 100 °C.

Supplier: IDEX RHEODYNE

RheFlex® tube fittings provide inert, non-metal connections, and can be used with all Rheodyne injectors, valves and sample loops.

Supplier: BURKLE

PP or PVDF.

Supplier: KARTELL

PP, translucent.

Supplier: KARTELL

PP, white.