You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Capillary column splitter kits
Supplier: Agilent
These splitters are used for splitting an injected sample from a single injector into two columns and on to two detectors.
Expand 3 Items
Injector nut kit
Supplier: Restek
Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.
Expand 1 Items
Capillary column caps
Supplier: Restek
These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.
Expand 2 Items
Ferrules, GRAPHPACK®
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection.
Expand 2 Items
Vu-tight installation fittings kit
Supplier: Restek
This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.
Expand 1 Items
Injector/detector plug nuts
Supplier: Restek
These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Expand 1 Items
Fittings for Shimadzu LC systems
Supplier: Agilent
These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.
Expand 7 Items
Bond Elut adapters
Supplier: VARIAN
Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.
Expand 1 Items
GC ferrules for Shimadzu
Supplier: Restek
Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.
Expand 3 Items
Fittings for HPLC and UHPLC, reusable, EXP®
Supplier: Restek
EXP® reusable fittings for easy and reliable HPLC and UHPLC connections for 10 to 32 fittings and ¹/₁₆" tubing.
Expand 15 Items
Internal adapter, male pipe to Valco®
Supplier: Restek
Internal adapter made of stainless steel gives minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.
Expand 2 Items
Septum nuts
Supplier: Restek
These septum nuts are made of high-quality stainless steel and for use with Agilent 5890/6850/6890/7890 split or splitless injectors.
Expand 2 Items
Metal adapters for flexible metalic tubing
Supplier: HWS LABORTECHNIK
Metal adapter with PT 100, for flexible metallic tubing.
Expand 1 Items
Fingertight capillary column nuts
Supplier: Restek
These fingertight capillary column nuts rapidly tighten without wrenches and can be used with 0,25, 0,32, or 0,53 mm ID columns.
Expand 2 Items
GC capillary column connectors kit
Supplier: Restek
This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.
Expand 1 Items
MSD conversion fitting
Supplier: Restek
This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.
Expand 1 Items
Ferrules for Shimadzu 17A GCs
Supplier: Restek
Ferrules with graphite construction for use with packed columns.
Expand 1 Items
Capillary column nuts for Agilent GCs
Supplier: Restek
These nuts are designed for Agilent 5890/6850/6890/7890 GCs. Nuts for use with standard ¹/₁₆" type ferrules are designed to fit a wider variety of ¹/₁₆" ferrules.
Expand 4 Items
Assembly kit for filtering flasks, Erlenmeyer shape
Supplier: GLASWARENFABRIK KARL HECHT
Assembly kit for filtering flasks, with removable plastic hose connection, short and long screw and seals.
Expand 1 Items
Internal tee, zero dead volume, Valco®
Supplier: Restek
Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.
Expand 2 Items
Internal union, zero dead volume, Valco®
Supplier: Restek
Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.
Expand 4 Items
Adaptors for PerkinElmer
Supplier: Agilent
Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.
Expand 11 Items
Reducing cross
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing cross, stainless steel, 130 mm, DN 40/25, Stainless steel
Expand 2 Items
Nuts and ferrules, Rheodyne®
Supplier: Restek
Replacement long nut connects stainless steel tubing to a Rheodyne® 6-port valve or other Rheodyne® part.
Expand 2 Items
Internal cross, zero dead volume, Valco®
Supplier: Restek
These internal cross are made of stainless steel. Used to connect four lines. Ideal for 1,6 mm OD tubing.
Expand 2 Items
Ferrules, Alumaseal®
Supplier: Restek
These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.
Expand 3 Items
Adapter ferrules, Valco®
Supplier: Restek
Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.
Expand 7 Items
GC ferrules, UltiMetal Plus
Supplier: Agilent
UltiMetal Plus, Flexible metal ferrule, for UltiMetal column tubing, Metal, Hole Ø: - mm, Tubing int.Ø: 0,53 mm
Expand 6 Items
Internal reducing union, zero dead volume, Valco®
Supplier: Restek
Internal reducing union used to connect two sizes of tubing, using zero-dead-volume fittings on each end. Suitable for 1,6 to 3,2 mm OD tubing.
Expand 3 Items
Capillary column nuts, finger-tight
Supplier: Restek
These finger-tight capillary column nuts made from high-quality stainless steel are an alternative to conventional column nuts. These fittings work best with graphite type ferrules and help prevent over tightening, which can cause graphite material to exude into the inlet.