You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Tubing connectors, L-shaped
Supplier: PIEPER FILTER
L-shaped connectors for tubing, made of PP, translucent.
Expand 6 Items
Tubing connectors, straight, reducing
Supplier: PIEPER FILTER
PP, translucent.
Expand 12 Items
Ferrules for gas chromatography
Supplier: Restek
Ferrules are available in Vespel®, graphite or Vespel®/graphite.
Expand 71 Items
Replacement ferrules for MXT® connectors
Supplier: Restek
Replacement nut, 0,8 mm
Expand 3 Items
Column connectors and plugs
Supplier: Restek
Universal 10-32 PEEK connectors for easy installation of all ¹/₁₆" tubing, it includes stainless steel, up to 345 bar.
Expand 2 Items
MXT®-union connector kits for fused silica columns
Supplier: Restek
These MXT® union connectors kits are suitable for connecting metal and/or fused silica GC columns.
Expand 6 Items
Ferrules for Thermo Scientific GCs
Supplier: Restek
Graphite Ferrules for Vu2 union connectors.
Expand 5 Items
Tubing connectors, straight, reducing, PP
Supplier: SEMADENI
Connectors, straight, conical shape and stepped, made of PP, wiith different fitting diameters on the two sides able to connect with tubing having different diameters.
Expand 2 Items
T-pieces
Supplier: EDWARDS HIGH VACUUM METTLER
T-pieces made of aluminium or stainless steel.
Expand 7 Items
Gas line connectors for 7500
Supplier: Agilent
These gas line connectors ensure stable, consistent usage and sensitivity for a range of ICP-MS applications.
Expand 2 Items
Connectors, click-on in-line super clean®
Supplier: Restek
Click-on connectors allow you to change traps quickly, without introducing oxygen into your system.
Expand 1 Items
Biocompatible adapters
Supplier: VARIAN
Biocompatible adapter, 1/16” to 1/8”, PEEK, with fittings, PEEK
Expand 1 Items
Elbows, stainless steel
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 40 mm, Stainless steel
Expand 3 Items
Tubing connectors, SVS, bent
Supplier: witeg Labortechnik
Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.
Expand 1 Items
Fittings, Siltek®/Sulfinert® and Silcosteel®-CR treated, Parker®
Supplier: Restek
Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in Siltek®/Sulfinert® or Silcosteel®-CR treatment.
Expand 64 Items
Connectors, Vu2 Union®
Supplier: Restek
These connectors can be used to connect a guard column to an analytical column, a column to a transfer line, two columns in series or repair a broken column.
Expand 4 Items
GC column-mass spectrometer connector, EZ No-Vent®
Supplier: Restek
A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.
Expand 7 Items
Tubing connectors, X-shaped, PP
Supplier: SEMADENI
Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.
Expand 1 Items
Column end-fittings
Supplier: Restek
These ¹/₄" compression end-fittings are compatible with ¹/₁₆" connecting tubing using Valco and Parker fittings.
Expand 2 Items
Ferrules for single ferrule column connectors
Supplier: VARIAN
Ferrule, 0,53 mm to 0,53 mm ID, 15% graphite/85% Vespel®
Expand 5 Items
Double connector, click-on in-line super clean®
Supplier: Restek
Double connectors are used to effectively connect any click-on trap to a click-on indicator.
Expand 1 Items
GC ferrules, Graphite Vespel®
Supplier: Restek
These ferrules can be used with Vacuum Vu-Union® connectors.
Expand 4 Items
Tubing connectors, Y-shaped
Supplier: KOHLER
Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.
Expand 11 Items
Connectors, Press-Tight®
Supplier: Restek
Deactivated Press-Tight® connectors maintain complete inertness along the GC flow path and Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis. These connectors fit 0,33 to 0,74 mm ext. Ø and 0,1 to 0,53 int. Ø columns.
Expand 17 Items
Low-dead-volume connector kits, MXT®
Supplier: Restek
Rugged MXT® low-dead-volume connectors are Siltek® treated to make them inert to active compounds. They can be used at temperatures up to 430 °C without degrading the deactivated layer.
Expand 4 Items
Ultimate union kits and fittings
Supplier: Agilent
Ultimate union provides low dead volume column connections that are used to create an inert, leak-free, and robust seal.
Expand 13 Items
Connector kits, SeCure® 'Y'
Supplier: Restek
Connector kits connects two analytical columns to a transfer line or guard column. They have a reliable seal integrity and will not unexpectedly disconnect during temperature programmed analyses. The open design allows visual confirmation of the seal for added confidence in the connection.