Conductivity Standards
Regular use of the conductivity standards in factories and laboratories guarantee instruments are properly calibrated at all times for accurate readings. Placing probes into the solution with an identified transfer ability, the equipment settings can be adjusted prior to testing. The equipment maintenance permits estimations of impurities and ion levels present in samples. Meeting industry regulations, the solutions are created under strictly controlled conditions for complete working stability and reliability.
Conductivity standard 12880 µS/cm (25 °C; 0.1 mol/L; KCl) for conductivity measurement
Supplier: KNICK
Conductivity standard, (0,1 mol/l KCl), ready-to-use, 12880 µS/cm
Expand 1 Items
Conductivity standard 147 µS/cm (25 °C; 0,001 mol/L; KCl) for conductivity measurement
Supplier: SI Analytics
Conductivity standard 147 µS/cm (0,001 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standard 1413 µS/cm (25°C; 0,01 mol/L; KCl) for conductivity measurement
Supplier: SI Analytics
Conductivity standard 1413 µS/cm (0,01 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standard 12880 µS/cm (25 °C; 0,1 mol/L; KCl) for conductivity measurement
Supplier: SI Analytics
Conductivity standard 12 880 µS/cm (0.1 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standard 1,413 µS/cm (25°C; 0,01 mol/L; KCl) for conductivity measurement
Supplier: SI Analytics
Conductivity standard 1413 µS/cm (0,01 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standards, potassium chloride solutions
Supplier: CONSORT
Potassium chloride solutions referenced at 25 °C.
Expand 3 Items
Conductivity and resistivity standards, referenced at 20 °C
Supplier: REAGECON
A complete range of certified control standards with values ranging from 133 to 26,6 µS.
Expand 3 Items
Conductivity Standards
Supplier: REAGECON
To enable analysts to achieve the correct result when measuring conductivity and to prove the correctness of that result; Reagecon has developed a high quality range of Conductivity Standards; which can be used for calibration of conductivity sensors; quality control; method validation and instrument qualification.
Expand 5 Items
Conductivity standards, KCl, referenced at 25 °C
Supplier: REAGECON
These conductivity standards are aqueous and so avoid the problems of matrix errors and high temperature dependency of nonaqueous conductivity standards.
Expand 41 Items
Conductivity standard 10000 µS/cm (25 °C; 0,0765 mol/L; KCl) for conductivity measurement
Supplier: YSI ENVIRONMENTAL
Conductivity standard 10 000 µS/cm (0,0765 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standard 100000 µS/cm (25 °C; 0.85 mol/L; KCl) for conductivity measurement
Supplier: YSI ENVIRONMENTAL
Conductivity standard 100,000 µS/cm (0,85 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity standards
Supplier: HAMILTON BONADUZ
Conductivity standards with stability of ±1% - guaranteed over a lifetime of up to three years.
Expand 8 Items
Conductivity and TDS standards
Supplier: Hanna
An extensive range of standard solutions designed to ensure maximum accuracy of conductivity meters and sensors.
Expand 2 Items
Conductivity standard 1000 µS/cm (25 °C; 0,007 mol/L; KCl) for conductivity measurement
Supplier: YSI ENVIRONMENTAL
Conductivity standard 1000 µS/cm (0,007 mol/l; KCl), Reference temperature: 25 °C
Expand 1 Items
Conductivity calibration solutions, YSI
Supplier: YSI ENVIRONMENTAL
Conductivity standard, 50 000 µS/cm
Expand 1 Items
Conductivity standards
Supplier: Mettler - Toledo
A slight change in temperature usually has a big impact on the conductivity value of a standard solution. A table on every bottle label indicates the conductivity values at the most common measurement temperatures.
During calibration the meter automatically references to this table for temperature compensation. If possible, calibration and measurements should be performed at the same temperature