You searched for: Water Purification Systems

Supplier: VWR Collection

This compact system produces EDI-based Type II water directly from tap water. Quality of Type II water meets or exceeds water quality as defined by ASTM, CAP, CLSI and ISO 3696 / BS 3997, and also complies with the purified water requirements from the European and U.S. Pharmacopoeia.

Supplier: VWR Collection

This powerful and intuitive laboratory water purification system produces Type I ultrapure water from RO, distilled or deionised water. The product water quality meets or exceeds CLSI and CAP Type I water standards.

Supplier: VWR Collection

Our VWR® laboratory-grade water purification systems feature an inspiring, application-oriented design. Perform your workflows faster and more reliably, simplifying your daily lab work while ensuring cost-efficient operation over the long term. All instruments offer flexible solutions as they can be adapted to your requirements and integrated into your laboratory environment.

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

The Milli-Q® SQ 200 water purification system delivers ultrapure (Type 1) water from an SQ Switch 3,5 L tank filled with pure reverse osmosis (RO) water.

Supplier: Merck

The Milli-Q® HR 7060 system is a high-throughput standard water purification solution that can reliably meet the diverse needs requiring reverse osmosis (RO, Type 3) pure water - for a single laboratory or an entire research facility.

Supplier: Merck

Milli-Q® CLX 7000 analyser feed systems produce up to 3000 L/day of pure water from tap.

Supplier: Merck

The Milli-Q® SQ 200P water purification system delivers ultrapure (Type 1) water from a lab's pressurized purified (RO/DI) water loop. It benefits from a flexible handset dispenser to deliver ultrapure water.

Supplier: Merck

The Milli-Q® SR 240L water purification system delivers pure reverse osmosis (RO) water to two mobile SQ Switch 3,5 L tanks.

Supplier: Merck

The Milli-Q® SR 240XL water purification system delivers pure reverse osmosis (RO) water to one mobile SQ Switch 3,5 L tank and one SQ 50 L tank. The 3,5 L tank is easily transferred to the Milli-Q® SQ 200 Purification system to produce fresh ultrapure water anywhere in the lab.

Supplier: Merck

Economical water system with Elix® technology, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 L/min. For clinical analysers with pure water needs up to 300 L daily.

Supplier: Merck

The Milli-Q® SQ 240CV water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a fixed preset volume dispenser that records and repeats the dispensing volume of ultrapure water.

Supplier: Merck

RiOs™ Essential systems are ideal for laboratories needing reliable, constant production of Reverse Osmosis, RO (Type 3) water from potable tap water. They integrate complementary water purification techniques, including pretreatment and high-performance reverse osmosis (RO) membranes.

Supplier: Merck

The Milli-Q® SR 240 water purification system delivers pure reverse osmosis (RO) water to a mobile SQ Switch 3,5 L tank. This tank is easily transferred to the Milli-Q® SQ 200 Purification System to produce fresh ultrapure water anywhere in the lab. Thanks to the mobile SQ Switch tank, this water system adapts to any lab configuration: the RO water production unit is placed next to a potable water source, while unlimited ultrapure dispensing modules can be positioned anywhere in the lab or building with an electrical outlet. This allows for a flexible installation that can be easily adapted and scaled according to changing lab requirements.

Supplier: Merck

The Milli-Q® SQ 240C water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a flexible handset dispenser to deliver ultrapure water. It can also be equipped with a gravity valve (optional) to dispense pure RO water directly from the SQ Switch 3,5 L tank base.

Supplier: Merck

Milli-Q® IQ Element water purification and dispensing unit is designed to fit into your trace analysis workflow. The Milli-Q® IQ Element unit, combined with a Milli-Q® IQ 7 series water purification system, delivers analytical grade ultrapure water that is suitable for trace and ultra-trace elemental analyses, including ICP-MS, GF-AAS and trace IC.

Supplier: VWR Collection

This powerful, intuitive laboratory water purification system provides superior and consistent ultrapure Type I and EDI-based Type II water from tap water. Water quality meets or exceeds ASTM, CLSI, CAP and ISO Type I water standards, respectively.

Supplier: Merck

Elix® Essential delivers Type 2 water customised to fit a broad range of research areas. It is designed to be fed from potable water and is the ideal feed for any laboratory equipment, including ultrapure water systems such as Milli-Q® systems.

Supplier: Merck

This Reverse Osmosis membrane removes 95 to 99% of contaminants including ions, particulates, bacteria, and organic molecules (MW >200kDa)

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: Merck

Purifies up to 3000 L/day with integrated storage, distribution and remote monitoring.

Supplier: Merck

Suitable for general, non-critical laboratory applications or as a pretreatment for ultrapure water systems, the RiOs™ 3 system provides an ideal solution for Type III laboratory grade water needs such as manual cleaning and rinsing, buffer preparation, feed water for humidifiers, autoclaves and glassware washers. Designed for users seeking a compact, easy to use solution, the RiOs™ 3 system will be highly appreciated for its intuitive operation, small footprint and ease of maintenance. For users needing access to ultrapure water, the RiOs™ 3 system is ideal as pretreatment for Synergy® or Milli-Q® water purification systems. Up to 30 L/day of high quality analytical grade water (Type III water) from tap water.

Supplier: Merck

Reliable water purification for results reproducibility and lab productivity.

Supplier: Merck

An integrated ultrapure and pure water system that is intelligent, easy to use and environmentally friendly.

Supplier: Merck

Super-Q® Plus System is a high-flow water system designed to provide the 'final polish' to water which has been pretreated by reverse osmosis, distillation or deionization. The systems consistently produce ultrapure water quality which exceeds Type 1 ASTM/CAP/CLSI specifications.

Supplier: Merck

The compact, easy to use Milli-DI® water purification system has been designed especially to meet a need for small quantities of pure water, between 3 and 5 litres per day. The water produced is suitable for use in chemical and electrochemical applications, for the production of buffers, reagents and microbiological culture media, and a multitude of other applications. Milli-DI® water can also be used as feed water for ultrapure water systems.

Supplier: Merck

To deliver reliable, high quality scientific results, you require consistently high quality ultrapure water. The Milli-Q® EQ 7000 ultrapure water system is designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ·cm @ 25 °C; total organic carbon (TOC) ≤5 ppb] that can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab. An ultrapure water system designed by scientists, for scientists.

Supplier: VWR Collection

This 'two in one' lab water system produces ultrapure (Type I) and RO (Type III) water from tap water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: Sartorius

The arium® advance EDI provides Type 2 water in consistently high quality. The innovative iJust makes the best use of environmental resources by automatically optimizing water consumption. Unlike conventional water purification systems, the unique display with touch functions in combination with the intuitive menu navigation ensures easy operation.

Supplier: Sartorius

Arium® pro Type I water purification systems are designed for sophisticated users to meet all their requirements for reagent grade water, needed both for critical applications and routine analyses. Different versions are available for reliable and optimal analytical results.