You searched for: Stirrers
Stirrers are used ubiquitously in laboratories for simple mixing procedures with solutions of varying viscosities and heating needs. Hotplate varieties bring solutions up to heat quickly and efficiently, and powerful magnets in automatic stirrers deliver reliably consistent performance for all samples. Stirring rods and powered stirring units are all built of durable materials and deliver long-lasting performance under regular or continuous use. Surfaces are easy to clean for low maintenance concerns.
Stirrer blades for balloon flasks
Supplier: KARTELL
Fit all standard button tip stirring shafts. 'Long groove' keyhole (Ø 9 mm) provides easy insertion into flask neck and proper position for stirring action. Can be used continuously at temperatures up to 250 °C and, for short intervals, to 300 °C.
Expand 5 Items
VWR®, Magnetic Stirring Bars, Elliptical, Rare Earth
Supplier: VWR Collection
PTFE covered, rare earth magnetic core. The magnetic core is made from a combination of samarium and cobalt. The stirrers will continue to function at full strength for many years as the magnetism remains for longer. They are identified by an inert carbon black spot.
Expand 5 Items
Stirring paddles, PTFE
Supplier: Lenz Laborglas GmbH & CO.KG
Stirring paddles made of PTFE.
Expand 2 Items
VWR®, Magnetic Stirring Bar Retriever
Supplier: VWR Collection
PTFE covered, rare earth magnetic core. For the removal of stirring magnets from vessels of all kinds.
Expand 4 Items
Stirrer Bearings, glass
Supplier: Bohlender
Combination of borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made
of polyphenylene sulphide.
Expand 7 Items
Hei-PLATE Sensor Packages Expert
Supplier: Heidolph Instruments GmbH & Co.KG
Hei-PLATE sensor Basic and Advanced package Expert.
Expand 2 Items
Stirrer bearings, PTFE
Supplier: Bohlender
These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.
Expand 11 Items
Overhead stirrer tools, propeller-type impellers
Supplier: Heidolph Instruments GmbH & Co.KG
Made from stainless steel.
Expand 5 Items
Mechanical overhead stirrer, WiseStir® HS-50A
Supplier: witeg Labortechnik
General purpose basic laboratory overhead stirrer, ideal for stirring low to medium viscosity materials. The analogue unit has a chrome-plated stainless steel chuck to prevent corrosion. Ideal for use in schools, universities and inspection laboratories.
Expand 2 Items
Magnetic hotplate stirrer, Mini
Supplier: GLASWARENFABRIK KARL HECHT
This magnetic stirrer with heating plate is made of anodised aluminium.
Expand 1 Items
Stirring shafts and blades
Supplier: COWIE
PTFE. Interchangeable stirring shafts and blades, please order shafts and blades separately.
Expand 5 Items
Stirring Rods, Thermo Fisher Scientific
Supplier: Thermo Fisher Scientific
The fused quartz rods are manufactured by fusing naturally occurring crystalline silica.
Expand 5 Items
Magnetic stirring bars, PTFE/rare earth, TURBO™ octagonal
Supplier: COWIE
Octagonal shaped PTFE coated stirrer bars made using rare earth samarium-cobalt magnets, have greater magnetic strength than Alnico magnets.
Expand 7 Items
Overhead stirrer tools, impellers, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.
Expand 8 Items
VWR®, Magnetic stirring bars, glass-covered
Supplier: VWR Collection
Cylindrical, with Alnico V magnetic core.
Expand 5 Items
Overhead stirrer tools, maxi propeller stirrer, BOLA
Supplier: Bohlender
Stirring Tools, BOLA, Shaft, propeller, with three 45° angled blades, PTFE, Stirrer Ø: 140 mm, Shaft Ø: 10 mm, Shaft length: 600 mm
Expand 11 Items
Magnetic Stirrer, Fully Electronic
Supplier: GLASWARENFABRIK KARL HECHT
Square CERAN® heating plate fully electronic control of the speed and the heating plate temperature, with digital display and timer function.
Expand 1 Items
Quartz Glass Rods
Supplier: TECHNICAL QUARTZ SOLUTIONS
Temperature resistant glass rods made from transparent quartz glass.
Expand 6 Items
Rotary Agitator
Supplier: Merck
If your waste samples contain non-volatile or semi-volatile substances or metals, use this hazardous waste filtration system for saparation, extratction, and filtration.
Expand 1 Items
Stirring paddles
Supplier: Sampling Systems
These paddles are ideal for use when producing liquids and suspensions. Stirrers are made from 316 stainless steel
Expand 4 Items
Stirring shafts
Supplier: Lenz Laborglas GmbH & CO.KG
Stirring shafts made of precision calibrated glass tube.
Expand 2 Items
Turbine spinner for use with Bruker® Spectrometers, SP Wilmad-LabGlass
Supplier: SP Industries
Manufactured to precision standards that exceed the spectrometer manufacturers requirements.
Expand 1 Items
VWR®, Magnetic stirring bars, micro
Supplier: VWR Collection
PTFE coated, strong Alnico V magnetic core. Round, smooth surface. For use in the smallest containers.
Expand 41 Items
VWR®, Magnetic Stirring Bars, Plain, Economy
Supplier: VWR Collection
PTFE covered, strong Alnico V magnetic core. Smooth surface with rounded edges which enhance agitation effect even at low speeds. Inexpensive, high performance.
Expand 4 Items
Overhead stirrer tools, turbine-type impellers
Supplier: Heidolph Instruments GmbH & Co.KG
Made from stainless steel.
Expand 2 Items
Magnetic stirring bar retrievers, PTFE Turbo
Supplier: COWIE
These retrivers are used for the removal of giant stirrer bars from vessels of all kinds.
Expand 2 Items
Magnetic stirring bar retrievers, flexible, PTFE
Supplier: COWIE
Retrivers are used for the removal of stirrer magnets from vessels of all kinds.
Expand 1 Items
VWR®, Magnetic stirring bars, oval
Supplier: VWR Collection
PTFE covered, Alnico V magnetic core. Smooth surface. Designed for use in round bottomed flasks.