Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
You searched for: Pumps
Pumps efficiently transport liquids or remove moisture and gases from a variety of different-sized containers. The devices are used for dispensing and general liquid-handling purposes. Ergonomic, handheld designs allow for continued comfort and one-handed operation. For the best reproducibility, digital pumps can be programmed to dispense precisely measured samples into culture plates, vials, tubes, or bottles. Pumps can measure in different units depending on preference.
Millivac™ Maxi Vacuum Pump
Supplier: Merck
Millivac™ Maxi vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.
Expand 1 Items
Vacuum pump systems, remote-controlled, type SC 820 G and SC 840 G, LABOPORT®
Supplier: KNF
Chemically resistant vacuum pump system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side, high performance condenser on pressure side and vacuum controller.
Expand 2 Items
Filter pump
Supplier: USBECK Laborgeräte
Water jet pump in nickel-plated brass.
Expand 7 Items
White Epoxy Motor Sanitary Centrifugal Pumps
Supplier: Avantor Fluid Handling
Clean-in-place (CIP) 3A sanitary transfer pump.
Expand 1 Items
Masterflex® Ismatec® Reglo Digital Piston Pump Systems with MasterflexLive®, Avantor®
Supplier: Avantor Fluid Handling
Achieve high pressure, accuracy, and repeatability—with an intuitive touch-screen interface.
Expand 4 Items
Vacuum pump system SC 920 G
Supplier: KNF
Vacuum Pump System SC 920 G is speed regulated.
Application: Rotary evaporation, distillation.
Expand 1 Items
Masterflex® Ismatec® Reglo Gear Pump Systems with MasterflexLive®, Avantor®
Supplier: Avantor Fluid Handling
Achieve high pressure and accurate, pulseless flow - with a secure, cloud-enabled platform for monitoring.
Expand 8 Items
Masterflex® L/S® Multichannel Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Get low-pulsation synchronous flow in multiple channels without cartridges.
Expand 6 Items
Diaphragm Vacuum Pump, N 920 G
Supplier: KNF
The robust diaphragm vacuum pump N920G is extremely quiet.
Expand 1 Items
Hand-Operated Piston Dispensing Drum Pump, Polypropylene
Supplier: Avantor Fluid Handling
Economical piston pumps are ideal for a variety of fluids.
Expand 2 Items
Walchem High Stroke-Frequency Diaphragm Metering Pumps
Supplier: Avantor Fluid Handling
Small pump cavity, two check valves, and high stroke frequency combine for superb self-priming and degassing properties.
Expand 1 Items
Masterflex® Complete Drum and Container Pumps, Avantor®
Supplier: Avantor Fluid Handling
System includes pump tube and motor—tube material options ensure chemical compatibility.
Expand 5 Items
Drum pump for mineral oils
Supplier: BURKLE
Barrel pump is used for light viscous mineral oil products such as diesel, fuel oil, hydraulic fluid, machinery, motor oil and many more.
Expand 1 Items
Masterflex® C/L® Microflex® Pump Head for Microbore Tubing, Avantor®
Supplier: Avantor Fluid Handling
Easy tubing changes—even in tight spaces.
Expand 2 Items
Masterflex® High-Viscosity Sanitary Drum Pumps, Avantor®
Supplier: Avantor Fluid Handling
Capable of pumping fluids with viscosities up to 10,000 cps.
Expand 2 Items
Drum pumps
Supplier: BURKLE
Drum pumps in PP, with rigid discharge tube or flexible PVC discharge hose with stopcock. Fast simple decanting of liquids from drums, canisters and tanks.
Expand 12 Items
Drum pump, gas-tight
Supplier: BURKLE
These drum pumps prevent the escape of dangerous or hazardous vapours when decanting liquids. The vapours produced are fed back to the decanting container from the filling container via the gas displacement line. The gas and liquid lines are also equipped with stop valves.
Expand 1 Items
Masterflex® Ismatec® 4-Channel Cartridge Pump Head with Stepper Motor, Panel Mount
Supplier: Avantor Fluid Handling
Versatile multi-channel panel mount peristaltic pumps provide synchronous and repeatable flow results across four channels.
Expand 1 Items
Masterflex® L/S® Standard Long-Shaft Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Ideal for fluid transfer applications requiring high accuracy and repeatability.
Expand 8 Items
Canister and barrel pumps, PumpMaster
Supplier: BURKLE
Manual positive displacement pump for filling, emptying, and transferring liquids between canisters and barrels. Positive pressure is produced using a manual piston and forces the liquid out of the container. Small quantities of liquid can also be drained off with the drain cock. The pump is fitted onto the barrel with a flexible, variable diameter plug. No special thread adapters are needed.
Expand 3 Items
Drum pump sets for solvents
Supplier: BURKLE
Barrel pump is used for highly flammable hydrocarbons such as ethanol, benzene, butanol, isopropanol, kerosene, methanol and many more.
Expand 1 Items
Vacuum hand pumps, VacuMan
Supplier: BURKLE
The vacuum hand pump can be operated with one hand to create a vacuum or pressure, independent of power supply.
Expand 5 Items
Micropump® B-Mount Gear Pump Heads
Supplier: Avantor Fluid Handling
Smooth pulseless flow provides precise, leak-free delivery of fluids.
Expand 15 Items
Drum pumps, AccuOne and EnergyOne
Supplier: BURKLE
The barrel pumps AccuOne and EnergyOne with the unique hybrid system ensure fast, flexible and convenient filling. The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to the electrical network. AccuOne and EnergyOne are designed for applications in which even very small amounts of liquid can be added to containers with narrow openings. They are made of high quality materials PP, PTFE and Hastelloy C, to ensure outstanding chemical resistance. This also makes them suitable for dispensing acids and bases.
Expand 6 Items
Masterflex® L/S® Easy-Load® II Pump Heads for Precision Tubing, Avantor®
Supplier: Avantor Fluid Handling
Automatic retention holds tubing securely in place with no manual adjustment—just load the tubing and start the pump.
Expand 4 Items
Masterflex® Digital Gear Pump for Micropump A-Mount Pump Head with Remote Control, Avantor®
Supplier: Avantor Fluid Handling
Larger, brighter interface makes setup and operation easier than ever!
Expand 2 Items
Masterflex® Open Impeller Centrifugal Pumps, Avantor®
Supplier: Avantor Fluid Handling
Suitable for suspended solids.
Expand 3 Items
Drum pumps, ultra-pure
Supplier: BURKLE
These pumps are ideal for decanting high purity liquids. Materials in contact with liquid are PTFE and FEP, these enable liquids, which attack conventional materials such as PP and PVC, to be pumped (except elemental fluorine). The stopcock, made of PTFE, prevents the escape of hazardous vapours and stops dripping.
Expand 6 Items
High-Efficiency Polypropylene Standard Centrifugal Pumps
Supplier: Avantor Fluid Handling
Split volute casing forms a volute chamber to increase pump efficiency, reduce horsepower, and energy usage.
Expand 1 Items
Hand-Operated FDA Compliant Drum Pumps
Supplier: Avantor Fluid Handling
Ideal for most acid/base or ionic salt applications.