Pumps

Supplier: Lenz Laborglas

Robust design water jet pump made of borosilicate glass.

Supplier: Heidolph Scientific Products

Peristaltic pump heads SP standard 1,6 mm and SP standard 2,5 mm: For simple pumping tasks. Housing made from die-cast aluminium. Rollers made from stainless steel, roller bearings made from polyamide. Rotor equipped with 2 convex rollers; cell cultures will not be damaged. For tubing with wall thickness of 1,6 or 2,5 mm. Rated flow: 0,5 to 3644 ml/min (depending on the drive and tubing used).

Supplier: Cytiva

Single channel laboratory pump for use in liquid chromatography and other applications where accurately controlled liquid flows are required.

Supplier: Heidolph Scientific Products

Models PD 5001 and PD 5006 for standard applications. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there can be no contamination. Suitable for transporting high-viscosity media up to 10000 mPas. The pumps are self-priming, with no seals or valves. They can be used in the food industry for filtering and separating, for water treatment, in biotechnology, and for routine laboratory applications. Pressure and vacuum displacement possible. Maintenance free motors ensure long service life.

Supplier: Cytiva (Formerly Pall Lab)

This combined vacuum pump and compressed air supply is guaranteed oil and dust-free and helps to keep the entire laboratory spotlessly clean.

Supplier: Cole Parmer

Chemical compatibility ideal for rotary evaporator application.

Supplier: Bohlender

Sampling pump is made up of PP and PTFE.

Supplier: Heidolph Scientific Products

SP vario pump head cover

Supplier: Sartorius

The Microsart® e.jet is a laboratory vacuum pump which creates vacuum and concomitantly transfers the filtered liquid to waste.

Supplier: Heidolph Scientific Products

Models PD 5201 and PD 5206 for advanced requirements. Peristaltic pumps are ideal for transporting and metering aggressive, abrasive, or corrosive solutions, and also for sterile media under low pressure. The medium to be transported only comes into contact with the tubing, so there is no contamination. Suitable for transporting highly viscous media up to 10000 mPas. The pumps are self-priming without seals or valves. Can be used in the food industry for filtering and separating, for water treatment, in biotechnology and routine laboratory applications. Media can be transported under pressure and under vacuum. Maintenance-free motors ensure long service life. Quantities displaced by the pump heads are stored in the program depending on the individual tubes used, and are shown in the digital display. Software may be ordered separately as an accessory. The pump drive is microprocessor-controlled. Equipped with RS232 digital interface; speed, metered quantity, flow rate, pause, and tube dimension can be controlled. Digital display of speed (min⁻¹) and flow rate (ml/min). Digital display of displacement volume (ml) in the case of volume metering. Intermittent metering is available with adjustable pause times. A metered volume can also be specified in addition to the flow rate display. Extremely simple calibration of displacement volume (ml) and flow rate (ml/min).

Supplier: Sartorius

The vacuum pump series Microsart® maxi.vac and Microsart® mini.vac provide up to date technology for daily use in the Microbiology laboratory environment.

Supplier: Avantor Fluid Handling

Precise, Programmable, Dosing with VFD Control and EPM Memory Chip. The IMP design incorporates a gear reducer and a programmable vector drive in a compact design for precise metering. Metering parameters can be pre-configured on an Electronic Programming Module (EPM) memory chip, making conversion from a previous drive to a new drive or a change in parameters as easy as inserting the EPM chip.

Supplier: MP Biomedicals

White hand pump suitable for 7X bottles.

Supplier: GERBER FUNKE

LactoFlash is an accurate, reliable instrument for rapid analysis of the main constituents of milk. It directly measures fat and SNF (Solids Non Fat) and then calculates density, protein, lactose and freezing point.

Supplier: INTEGRA Biosciences

The DOSE IT peristaltic pump makes dispensing of culture media, buffers and other solutions easy and efficient. In addition to the dispensing and pump mode, DOSE IT is able to create customised liquid handling protocols. Easy to follow instructions on the display allow users to set up individual protocols, consisting of consecutive application steps.

Supplier: EDWARDS HIGH VACUUM METTLER

The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.